Hi, i have a problem with switchable graphics

hi, i bought recently GTA5, and in-game menu it shows that i have only 512mb on video, when my leptop comes with 2gb dedicated. i also have tried all the fixes and nothing. updated drivers, tried to configure switchable graphics..any help ?

Hi @liviu911 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your concerns with Grand Theft Auto V PC System and your HP 15-g053nl Notebook.
The Game Specs requires minimum
Memory: 4GB
Video Card: NVIDIA 9800 GT 1GB / AMD HD 4870 1GB (DX 10, 10.1, 11)
Sound Card: 100% DirectX 10 compatible
HDD Space: 65GB
Here is the support site for Grand Theft Auto V.
Changing the system for gaming could result in damage or video issues. Here is a link to help with any Graphic issues. Enable hardware acceleration usually helps. Here is a link to explain your concerns with the Switchable Graphics.
Make sure all the updates have been completed.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

HP Pavilion g7-sr2377 Nr. D2H11EA#ACB Problem with switchable graphic

Hello everyone.
I have a big problem with switchable graphic on HP Pavilion g7-2377, he doesn't work.
Main graphic card: Intel HD 4000
Discrete: AMD Radeon HD7600
I'am using a Windows 7 Ultimate x64 Operating System. Someone can help to fix that problem?
This question was solved.
View Solution.

Hi:
Uninstall any graphics drivers you have tried, reboot and use this one...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&dlc=en&lc=en...

Problem with Switchable Graphics on Windows 7 64bit

My Lap : T400 - P8600 2.4 - 4GB ram - ATI 3470 + Intel ...
While enter BIOS, set :
- Default Primary Video Device : Internal
- Boot Display Device : ThinkPad LCD
- Graphics Device : Switchable
- OS Detech Switchable Graphic : Enable
After, into Windows, wait 10 minutes, nothing on the screen. So sad.
Then, restart my T400, set again BIOS :
- Graphics Device : Discrete
- OS Detech switchable graphics : Disable
Result : good. Hower, save power >>> can not ATI card >>> swich to on board.
HELP ME TO USE "SWITCHABLE GRAPHICS" ON Windows 7 x64.
Thanks so much !

Hi @Varunhellboy
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you are having an issue with your switchable graphics.
Here is a link to HP Notebook PCs - Overview of Switchable Graphics or Dual GPUs
I suggest you do a recovery back to factory.
Performing an HP system recovery (Windows 8)
Once completed then do all your Windows updates and run the HP Support Assistant to acquire any updates.
There will be an option during the recovery to backup your personal files to prevent data loss. If you do not already have one , now is the time.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You may also consider contacting HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Problem with switchable graphic cards after installing windows 10

Dear support, after installing windows 10 i lost option to switch my graphic cards. I already have installed new drivers for win10 64-bit. But it doesn't work. New drivers which i downloaded here: http://support.amd.com/en-us/download/desktop?os=Windows+10+-+64 doesn't support my graphic card. So i don't know what to do to get right drivers and be able to switch my graphic cards. Thanks for any help.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you installed Windows 10 and that switchable graphics is not working for you. I am happy to help. Unfortunately this is not something that AMD can help with, as it is a customized driver for your notebook. Did you do the Windows 10 installation as an upgrade and if so which operating system did you upgrade from? The existing HP drivers can be found here: HP Pavilion g6-1004ev Notebook PC but they are for Windows 7 or 8 depending on your choices. You could try those and install it using compatibility mode and see if that works. How to: Install and Update drivers in Windows 10 - answers.microsoft.com Let me know if that works for you.

Mountain lion - problem with the graphics.

mountain lion after installation I have a problem with the graphics.

This is how it looks like for me. This accours on every Boot Up.

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

Satellite Pro A120: I have problems with the graphics driver installation for W2k

I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.

the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S.

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's.
These "streaks" appear to be area of too high frequency scanning; they can be cleared by scrolling up and/or down.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu [[Image:New Fx Menu]] > options > advanced > general''.

Problem with dual graphic

I own HP PAVILION G6 1202TX model.It is built with dual graphics INTEL and RADEON. INTEL - INTEL(R) HD Graphics 3000 and
AMD- RADEON(TM) HD 6470M.earlier accidently i lost my windows and its all drivers but my main issue is with ts graphics.If i install AMD drivers a notification bar shows problem with INTEL graphics and if i install INSTALL it shows issue with RADEON.After installing the driver every time i restart my pc AMD shows a dialogue box and if i have installed AMD ,INTEL keeps poping up notification bar in right lower corner of pc it something related to INTEL SYSTEM TRAY GRAPHICS.
Now i have installed INTEL graphics driver i and every time ii restart my pc it shows a dialogue box
this dialogue box appers every time i start my pc
PLEASE HELP ME
Hope for a freequent action
THNK YOU.
This question was solved.
View Solution.

Hi ashwani26596,
Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problem with discrete graphic card and DirectX 11

If I try any application to launch with discrete graphic card (nvidia geforce 740m) that using directx 11 it always crashes.
There no problems with directx 9 on on this graphic card.
There are no problems with integrated graphic card whether application using directx 9 or 11. Problem occurs only with discrete graphic card and directx 11.
The things that i did:
- Reinstall Windows
- Install latest driver updates (I also tried to uninstall latest and install recomended driver downloaded from the oficial HP support 'driver download' web page)
- different options on nvidia control panel 3d settings page
I also tried microsoft 'Direct3D Tutorial Win32 Sample' source code to build and debug. It is failed in function IDXGISwapChain:resent with code DXGI_ERROR_DEVICE_REMOVED and ID3D10Device::GetDeviceRemovedReason returns DXGI_ERROR_DRIVER INTERNAL_ERROR.
Is there any chance that is not hardware malfunction?
Model Envy 15-j175er
OS Windows 8.1 64

@Enegue ,
Hello and thank you for posting on the HP support forum. In your situation I would consider keeping with Directx 9. The reason I say this is your notebook is not a performance gaming machine. It is designed to be fore general use.
Some cards will notice issues when upgrading to direct 11 from a lower level.
Not to mention with your notebook you will want to stick with the drivers only provided from the HP support site. They are proprietary for the notebook and could be the reason why the directx 11 is not working.
Here is the link to your systems supported drivers.
HP ENVY 15-j175er Notebook PC (ENERGY STAR)
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

HT201177 hello i have a problem with my macbook pro

hello,i have a problem with my macbook pro its graphics are not doing gud its getting struck when iam moving to a diffrent desktop,so can u kindly tel me a solution to the problem

Check to see how many programs you have open. CMD +Option + ESC buttons and maybe force close programs you aren't using. Remember the "red x" does not completely quit out of the program, to quit permanently use the drop down menu up top, click "application name" from drop down and than go to Quit "application name".

I have a problem with my macbook pro. A band about an inch

I have a problem with my macbook pro. A band of varied colors about an inch & a half wide running the length of my screen vertically suddenly appeared. What is wrong with my Mac?

This is either a graphics processor issue or a display issue. I highly suspect the latter. Either way, it is a hardware issue for which no online troubleshoot exists.
To test, however, the next time it occurs, take a screen shot. If the distortion appears on your screenshot, then the problem is with your graphics processor and you to get your logic board replaced. If the distortion does not appear on the screenshot, then the issue is with your display and you need to get your display replaced.
Best of luck.

Satellite U500-1DZ DPC latency problem with the graphic card geforce 310M

Hello
I have a problem with de DPC latency cause by the nvdia card driver.
I use my computer for audio and it's really not possible to work.
graph with geforce abled :
http://nsm04.casimages.com/img/2010/09/22/100922123519210586795529.png
when i disable the graphic card :
http://nsm04.casimages.com/img/2010/09/22/100922123519210586795528.png
Please give me an answer.
My computer is a Toshiba satellite U500-1DZ, intel i5
Thank you

Hi, thank you for your answers.
I have updated the last nvdia driver, the new bios and everything I found on this website, but It doesn't change anything...
Apparently I'm not the only one to have this problem, but I don't know if it comes from Toshiba or from Nvdia.
Do you know if it's normal to have four times "NVDIA High definition Audio" in the audio/video/games controllers ?
When I seactivated it it's a litlle bit less worth (but still not good)...
I'm using a preinstalled windows 7 64 bit version
Thank you !
Fred
Message was edited by: fredo0411

Have a problem with a brush preset picker in CS5

Have a problem with a brush preset picker. By right click over your document (if you using brush or cloning tool) it’s open, so you choose a brush and size. But in new version, if your option bar is in different monitor (I am using two monitors one has my working area – document, other one tools), its open only in that monitor, where is a option bar. Supposed to open over your working area like it was in CS4. Seems to me, it’s not recognizing second monitor.

My graphic setting is OK, my CS4 is working fine. I thing it's a bug in new version.
Yes I have extended desktop mode.

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

Hi, i have a problem with switchable graphics

Similar Messages

Maybe you are looking for