Hi. I have a problem..

Hi there.
One month later I bought a second hand iPhone, everything worked fine, i was able to create my icloud account, to activate find my phone, to locate it on map, full iCloud and iPhone features, but after one month i wanted to gift it so i did a restore from iTunes and now it is linked to an unknow Apple ID. The saller says that he has no ideea.. Any help?
Ohh.. and in my iCloud account from Pc my iPhone is shown..

Ok I see, just trying to be careful you know, my apologies. But umm.. i didnt see anyhting about it being private but this is waht i got so far...
When i connect from the walljack to the PC i get the following...
IP:10.42.201.93
Subnet:255.255.0.0
Gateway:192.168.1.1
DNS:192.168.2.33
When i connect the router to the PC i get the following...
IP:192.168.1.101
Subnet:255.255.255.0
Gateaway:192.168.1.1
DNS:192.168.1.1
Also I was looking on the site and it was showing my in the guide how i can find my router and I look everywhere on my PC(if i didnt skip over anything) and I cant seem to find my router. I was wondering is it possible to do so some other way, so that I can config it? Because I also read in other places about putting your routers IP in your brower or something?

Similar Messages

  • I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

    I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
    Pls inform me how can i resolve the problem of wifi.

    You have to go to autherized iPhone agent.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

    Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

    See [[Firefox keeps opening many tabs or windows]]

  • TS2446 i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, what is the problem? what can i do ?

    i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, i creat a new password and still that message shoes ,what is the problem ?can you help me please???!!!!

    If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have a problem with JDBC Realm in Tomcat/Oracle/Win XP

    I have a problem with JDBC Realm in Tomcat.
    I have attached my server.xml file located in the
    C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\server.xml
    The Problem is that when I login I get the user name and password prompt but it does not resolve.
    When I enter in the tomcat-users.xml password with memory realm uncommented it works fine.
    C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\tomcat-users.xml
    Is there a cache or something I need to reset for the JDBC Realm to work?
    I have attached my tables and contents as well...
    Did I miss something????
    Thanks
    Phil
    server.xml
    <Server port="8005" shutdown="SHUTDOWN">
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    </GlobalNamingResources>
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="8080" maxHttpHeaderSize="8192"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@localhost:1521:orcl"
    connectionName="testName" connectionPassword="testPass"
    userTable="users"
    userNameCol="user_name"
    userCredCol="user_pass"
    userRoleTable="user_roles"
    roleNameCol="role_name" />
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    </Host>
    </Engine>
    </Service>
    </Server>
    Tables
    create table users
    user_name varchar(15) not null primary key,
    user_pass varchar(15) not null
    create table roles
    role_name varchar(15) not null primary key
    create table user_roles
    user_name varchar(15) not null,
    role_name varchar(15) not null,
    primary key( user_name, role_name )
    select * from users;
    ----------------------+
    | user_name | user_pass |
    ----------------------+
    | tomcat | tomcat |
    | user1 | tomcat |
    | user2 | tomcat |
    | user3 | tomcat |
    ----------------------+
    select * from roles;
    | role_name |
    | tomcat |
    | role1 |
    select * from user_roles;
    -----------------------+
    | role_name | user_name |
    -----------------------+
    | tomcat | user1 |
    | role1 | user2 |
    | tomcat | tomcat |
    | role1 | tomcat |
    -----------------------+

    Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8080
    Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 734 ms
    Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
    Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
    SEVERE: Exception opening database connection
    java.sql.SQLException: oracle.jdbc.driver.OracleDriver
         at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
         at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
    Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart

  • Itunes wont sync songs to ipod - didnt have this problem when i had xp

    this is the message i get -
    Attempting to copy to the disk 'RYAN'S IPOD' failed. You do not have enough access privileges for this operation
    iTunes could not save to your Music Folder because you do not have write access. Check the permissions on your Music Folder and folders in your Music Folder, then try copying this file again.
    i keep getting this after i go and check the permissions and make sure everything is the way it should be... i didnt have this problem before upgrading to vista
    toshiba   Windows Vista  
    toshiba   Windows Vista  

    I'm not sure if this will do anything, but maybe you could find the iTunes Music folder, right click - properties, and unchecked read only if it's checked.

  • I cannot see my Hotmail saved messages on my iPad 4.  I do not have this problem on my iPad 2.  All settings look identical.

    I cannot see my Hotmail saved messages onmy iPad 4.  I do not have this problem on my iPad 2.  The settings appear identical.Any suggestions to cure the problem?  Thank you.

    My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
    Kind regards,

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

    Hello
    Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
    I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

    Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

  • My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

    My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

    Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
    If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • Is there a phone number to call Adobe.  I go around an endless loop pressing their contact info tabs?  Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Ai

    Is there a phone number to call Adobe.  I go around an endless loop pressing their contact info tabs?  Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Air.  It was working fine - I was using LR and a message came on the screen that said something like the memory was dangerously low.  I stopped and tried to delete LR files.  I couldn't do it.  I closed the program and tried reopening and got the message that there is not enough memory available to open LR.  I contacted Apple.  They spent a half hour on the phone with me and eventually told me they didn't know how to help. The tech said that LR had gobbled up all the memory and said I should contact Adobe and ask where and how my photo files are stored and to delete them.  I have several back-ups.  Thanks - Arthur

    This sort of error message only comes up for Lightroom when your hard disk is full. Indeed this has nothing to do with internal memory as that will be intelligently be dealt with. If you have a mac Book Air that is not so surprising as the cheapest versions come with very small hard disks and if you shoot raw with any recent camera, you'll fill up your hard disk very quickly and you can probably only store a few months of pictures if you are a typical photographer. So the bottom line is that you need to create some room on your hard disk. You should move some of your originals to an external hard disk. You can also delete some of your backup copies of your catalog file that Lightroom automatically generates every few days and that quickly gobble up hard disk space. So first figure out how full your hard disk is. To see that, go to the apple menu, hit -> About this Mac -> More info->Storage. You should see your internal hard disk on top and you'll find that it is almost entirely full with photos. Now find your Lightroom catalog file using Finder. It is usually in a folder in the Pictures folder in your home directory. You should see a Lightroom 5 Catalog.lrcat file, a previews file and a folder called backups. Inside the backups folder, you'll find a lot of subfolders. They have names that show the dates the backups were created. If you have backups of your entire hard disk, you can delete these backups when they are older than a few months. I usually only keep the last 4 around. Just drag the folders into the trash can on the dock on the bottom of your screen and empty the trash. This will probably free up enough space that Lightroom will already run again. Now start thinking about where you will want to store older images. If you have a good USB3 or Thunderbolt hard disk that is probably the best option. There is a video here by Adobe that has some instructions on how to do this: Is Your Hard Drive Full? Here’s How to Move Images to Another Drive in Lightroom. « Julieanne Kost's Blog If that doesn't work because you don't have enough hard drive space to run Lightroom yet, here is another set of instructions to move your files using the finder to the other hard disk: How do I move only my photos to another hard drive, leaving the catalog where it is? - The Lightroom Queen. If you follow that, as soon as you confirm all your images are on the new hard disk, you can delete them from your internal one. She is not so clear about that part but if you don't delete the originals that you moved off you don't free up space. You should move the folder structure over to the new hard disk and then reconnect the folders in Lightroom. That should make it refind all your images.
    That said, if you are uncomfortable with the computer in itself, your best bet is to find a local photography club. There is invariably a Lightroom savvy person in there that could help you move your files. That might be your best bet if you are uncomfortable moving these yourself. A general mac savvy person like you would find at an Apple store or so generally will not be able to help you with this except when they are photographers themselves and know Lightroom. You might get lucky with that.

  • Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
    ~Lyssa

Maybe you are looking for

  • Plugin check makes incorrect or misleading diagnosis about quicktime version on Mac OS X 10.6.4

    After reading about security issues with plugins, I ran the Mozilla plugin check to see if my plugins are up to date. It says my Quicktime plug-in is out of date and points me to the Apple web site for an update. However the information on the apple

  • How to not be asked to save unchanged documents?

    New MacBook with Leopard Snow. Files from an old iMac Panther. In Pages, opening old Claris Works .cwk files, when there's no changes I'm asked to discard or save changes. When there have been changes made I can't just just save, I'm given the save d

  • Error encountered with SAP Netweaver 2004S SR2 v7.0.9

    Hi.. I am trying to install the SAP Netweaver 2004S SR2 v7.0.9 but i have met with this error: Error: FSL-01002 Unable to create account abc\SAPServiceJ2E. HRESULT=0x80005009 Error: MUT-03025 Caught EsyException in Modulecall: ESAPinstException: erro

  • Message + and Sony SWR30

    After the latest update in Message + I no longer receive notifications on my Sony SWR30? Is there a work around this, or will this be fixed in the next update. I would love to keep using message + but at this point it does me no good.

  • HT1848 sync music from my pc to my iPhone 4s?

    now that I have an iPhone, would love to listen to my music over it. So far very confusing reading diff web instructions of how to sync music on my pc (i have iTunes) to my iPhone. Many instructions refer to things I do not see on my iTunes window. h