Hi I have a question in SALV_WD_TABLE
How to add RADIO BUTTONS through the code to SALV_WD_TABLE and i defined as this as ALV.
Guys, do u have any idea on this.
Thank you,
Srinivas.
wrong forum..post in web dynpro for abap forum
Similar Messages
-
I have a question that I think I know the answer to, but am looking for confirmation. I have a desktop computer at home that has clip art loaded onto it. I recently got an iPad and am looking for something similar. I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?
Sort of. There is an app called art shop that gives you a place to park clip art. But I don't think you really need it.
If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over, or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
As near as I can tell there is not a ready made clip art collection in app format laying around. -
Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
I have some questions regarding setting up a software RAID 0 on a Mac Pro
I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html -
I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you
You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hello, I have a question on "quest".????? I have someone getting into my computer. I have shut of the quest... and yet yesterday all of my files were stolen. My phone book, someone goes in and changes my phone number, and just changes so many things around. It really has me upset. Please... tell me how I can keep "guest" out for good. I bought this computer for me. Not guest, yet all I see here on the apple ways is how others can hook in, or get in to our computers.
Its upsetting, and to see how you give step by step instruction to help them get into other people's computers is upsetting, yet not much on how to keep them out. Tell me just how to keep them out for good. I have a hacker, in mine. Stealing things. I have cleaned my computer out three times, in the last few weeks. I get all set up, to only three days later, even with a new list of passwords, their back again, stealing. Please Help me MorgiegalData rate DOES make a difference, but I'd say your real problem has more to do with the fact that you're working on a Powerbook. Motion's real time capabilities derive from the capability of the video card. Not the processor. Some cards do better than others, but laptops are not even recommended for running Motion.
To improve your workflow on a laptop will be limited, but there are a few things that you can try.
Make sure that thumbnails and previews are turned off.
Make sure that you are operating in Draft Mode.
Lower the display resolution to half, or quarter.
Don't expect to be getting real time playback. Treat it more like After Effects.
Compressing your clips into smaller Animations does help because it lowers the data rate, but you're still dealing with the animation codec which is a high data rate codec. Unfortunately, it sounds necessary in your case because you're dealing with alpha channels.
The data rate comes into play with your setup trying to play through your USB drive. USB drives are never recommended for editing or Motion work. Their throughput is not consistent enough for video work. a small FW drive would be better, though your real problem as I said is the Powerbook.
If you must work on the powerbook, then don't expect real-time playback. Instead, build your animation, step through it, and do RAM previews to view sections in real time.
I hope this helps.
Andy -
I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
I have many questions, I have called Support, they refuse to forward or give me Tech Support See Be
Hi,
I have many questions, and have had a very frustrating time to get in touch with the correct person.
I have called support twice, both times even though it was a technical question about cloud, they refused to forward my calls and told me there is NO technicall support for Cloud and that I have to place my questions here in the forum.
I am CONTINUALLY told to change my password, 2 and 3 times a week. I am a sysAdmin, my passwords are a MINIMUM of 13 Char/UP/Lower/Number/Special Combo, always have been. They work out to a 100% approval in any algorythm checker. Yes, I was one of the persons who had their password stolen which has caused me a tad bit of inconvenience, but such is life. Is This Normal? I have gone on twitter a few times to verify the emails, I have got them so often.
My "Cloud Sync" Hasn't worked since PhotoShop's Site Closed, I know this beause I stored my 20gigs of files, .ai, and .eps, .psd eveything that I couldn't move to Revel (which btw, I never got a refund for having to purchase the revel account 20gigs, when photoshop was closed, which also was never refunded.)
I actually wasn't too worried about the cloud issue because I only work at home, if I go somewhere else.. work's not going with me
Since about three weeks ago and currently I am having NOTHING but problems with cloud, The errors in my Event Log are NUMEROUS
Activation context generation failed for "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Dreamweaver.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.76 01.17514_none_41e6975e2bd6f2b2.manifest.
In xml form:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">80</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-28T08:07:04.000000000Z" />
<EventRecordID>2269809</EventRecordID>
<Channel>Application</Channel>
<Computer>Celtic-Surfer</Computer>
<Security />
</System>
<EventData>
<Data>C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7 601.17514_none_fa396087175ac9ac.manifest</Data>
<Data>C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.760 1.17514_none_41e6975e2bd6f2b2.manifest</Data>
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data>C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Dreamweaver.exe</Data>
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
</EventData>
</Event>
manifest for x86/64bit at both dll files compiled so I cannot review their content.
However it should be noted at this time, I did not invoke Dreamweaver, the Cloud did, and this is not the first time.
This particular error occured 5 times in 3 seconds.
Same two errors at 3:49pm on the 28th.
Today, I went and bought a new solid state drive. Brand New Fresh OS, Downloaded Cloud, CC, and of course The Edge Products, which I dearly love btw. Everything seems to be working fine, EXCEPT,
1.) where did CS6 Products Go?
2.) Why after being a Faithful Product User/Cloud Supporter for the Last two years, after going through all the trials and tribulations with Adobe, am I being asked to renew my license for a "One Time Per Year Fee" which is MORE than my monthly amount? ( deal: 599.80; payments at 49.95 per month is 599.40 Go Figure? ) So, I'm being asked to pay the same amount, make it a single payment and get half the software, litterally. Did I miss a paticularly important anouncement?
3.) EVERYONE OF MY IRREPLACABLE FILES IN MY CLOUD ALL MY AI FILES, are gone. Yesterday, it would seem My having the SYNC TURNED OFF was over-ridden by the system (Adobes) and they have upload 'garbage' files, and my original files, the caligraphy files are no longer there. My gorgeous image of a little boy with flowers is no longer there. I PAID ALMOST A GRAND for these files. Stored them on Adobe, because, well, you deal with images, so you're the best right, that's why I bought extra storage on photoshop.com, then was told I would have to move to revel, but not the ai, eps, or pdf and i don't remember about png's. files, so I moved everything to revel (purchased the extra storage there.) AND put everything on the cloud and turned off my file sync. Not everyone is an idiot, maybe something is turned off, there's a reason for it, how dare someone override MY SETTINGS. They could have emailed, called, chat, google chat, irc, or snail mailed me, it's pretty easy to get my attention.
I could just cry.
lost my files,
asked to pay one time instead on monthy, and there's not even a discount and no additional incentive. Lost the ability to work without having to be connected to the internet, which will be delimited here very shortly since I'm on comcast.
and the worst, the very absolutely worst part is this is the SECOND time in a row now, I've had an issue with Adobe that has gone on for over a year while support TELLS ME A PAYING CUSTOMER, that 'gee, sorry, no support for cloud" , "No I can't forward you to a tech" (direct quote) and "The Only support for any cloud issues is the forum"
How can I handle this in the future, my nerves just can't take it anymore. Seriously, I'm just shaking now I'm so upset about this and I really hate writing something like this, or airing issues in public that really should be, imho, private.Hi Ken,
Wow, I've logged into adobe and never seen your response until now.
I need to make the forums more of a daily stop I guess.
Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared
Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
I have of course rebooted,
Gone into taskmanager, killed all the relevant threads, tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
Is there a way we can use it more of a "ftp" sort of thing, when I want to I can put files there? There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting. Just an fyi. for what it's worth.
Please, feel free to contact me,
I'm on g+ chat [email protected] -
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened
https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem. -
I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?
I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone. -
I have three questions. Count em'... 3!
Question #1 (my firts question)(out of three)
Is there a way you can bounce multiple logic files and put them all on one cd.
I'm starting to run out of blank CDs!
Question #2 (my second question) (out of a total of 3)
I saw a program where you can split the bounced tracks
For example if I had a song with 400 measures, I could have measures 1-150 on track 01 on my cd, and the measures 151-400 on track 2 of my cd?
Question #3 (my final question)
How do you use markers? I dont know how to put one up, and when I did get one up one time, I couldnt change it or delet it.
Well I guess I have another question.
Is there a way to arm multiple tracks for recording.
I record 8 simotanious tracks, and when I'm arming the tracks it looks pretty unperfessional (I doubt I spelled that right) the way I'm trying to push the down button and clik the rec button on every track.
And it looks like I'm trying to make a drum beat.
I'm an engineer. Not a drummer.
Oh! how do I change my profile name that says "hey!!!!"
I thought I'd be able to change it.
Thanks so much for all the help!
-Sam1: Yes, bounce all your songs as AIFF files and burn them on CD with iTunes, Toast or Jam.
2: Bounce your song and open the bounced file in Logic. Split the file as two files where you want the 2nd track to begin. Export both regions as AIFF files. Burn them on CD with Toast or Jam and put no space between songs. Remember to burn in Disk-At-Once mode to have no glitches. -
Hi i have a question, I'm trying to back up my iPhone to iTunes but it says restore from backup or setup up as new device. if i setup as new device will everything be deleted? if yes then how would i back it up without anything being deleted
Following is a link to instructions on how to backup (either via iTunes and via iCloud) http://support.apple.com/kb/HT1766
-
If i know email ( but i dont have acces to it ) and i dont have secret questions how can i recover my icloud account ?
I'n my company ( pawn shop ) i hope i transleted fine , i bought an iphone wich it seems to be ok at the first time.
That was on 26.11.2013 ( as can be seen in my pawn contract and billing ) . after 2 weeks i found a client to buy my second hand iphone and the i saw my mistake it is icloud blocked i need that password so i can reset the iphone to sell it. how can i manage this problem ? i can provide all my billings, contracts, society data everything.If you know the primary email linked to the account but do not have access to it or the answers to the security questions, then the next best thing to do is call Apple at 800-275-2273 and ask for Account Security. They will ask you for two pieces of information from the account in order to unlock it. The options are usually the security questions (each question counts as one piece), the credit card linked to the account, and either a device serial number or device verification code that they will send you.
After this verification is complete they can send the reset link for your password to any email you choose. Please be aware that if they verify you with something other than two security questions, there is a 24 hour wait before the email arrives.
Good luck! -
Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers
I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it.
Maybe you are looking for
-
2nd Gen Shuffle Syncs but no lights, won't play at all. Not sure what to do, any suggestions?
I have tried to reset shuffle and also uninstall/reinstall Itunes nothing has worked. at this point I'm not sure if it charging. I have tried on 2 different computers with the same results.
-
How do I call an object written in Plugin from Javascript in Acrobat 9.0?
Hi, Since Acrobat 9.0 has no longer support GetNumAVDocs() called in Javascript, it does not return number counter of opened pdf documents. I am looking for a way to write method GetNumAVDocs() or similar one in Plug-in. My questions are that 1. Can
-
Can't receive emails in apple mail
all my messges disappeared and i can't receive emails. can send them, but can't receive them.
-
When run the depreciation ,system said that Internal error in item 00000000
hi friends when i run the depreciation ,system went error ,and the error message that Internal error in item 00000000,asset row is not complete,do you know the reason thank you for your help
-
Hi all, I have copied the standard program of table BSIP to an ZBSIp. I wanted to add few more fields in the select opitons of this program . How can i do this,. Regards Priya