Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

Similar Messages

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

That's exactly right. And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes). In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored. That will restore everything in the article above, which does not include your photos. But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
Regardless, it sounds like you'll be fine! Your photos will wind up in iPhoto once you place them there. They will be safe there.

I have downloaded a pdf from a jounal web site. After doing this and inserting comments, then saving it, upon opening it again, i can no longer see the text but only the highlight changes that i made

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

After updating to Flash version 11.6.602.171 - can no longer play any embedded videos..and worse

To begin with, I'm running a clean AMD 64 Bit Windows 7 System. Never any problems with any of my video playing scenarios - until now - with this version 11.6.602.171.
After downloading and installing both versions - both for Firefox (other browsers) and IE, none of my browsers can play videos unless they are at their lowest resolution of 240.
So I used the Adobe Flash Uninstaller and ensured that the last vestages of Flash Player were removed - and reinstalled - all to no avail.
Then I downloaded the archived version of 10.3 to see if a previous version would work. But that wouldn't work either. None of my browsers will play videos now and I'm talking:
IE 10
Firefox 19.01
Avant Browser
Google Chrome
Google Chromium
Commodo Dragon
Commodo Ice Dragon
Opera
Waterfox
Pale Moon
None will play the video.
What you get is the video screen but unless you have a 240 option (lowest resolution), all you get is a green screen. You hear the talking/music, but there is no picture and all the green screen does is flash. Here's a JPG of the screen. If you put your cursor anywhere on the progress meter (arrow) it will show you a small image of what's supposed to be playing (see below), but the screen remains green and flashes while playing.
Now here is where it gets interesting. When I completely uninstall Adobe Flash Player and then go to a You Tube embedded video (on any site), there first appears a screen that tells you that you need a plug-in - but then within seconds (without downloading anything), the movie starts playing normally.
I then checked my Firewall (Zone Alarm) - turned it off temporarily - that wasn't the problem. Then checked my latest version of Avast AntiVirus software and temporarily turned it off - that was not the problem either. The videos still won't work and remain green unless you use the lowest resolution.
So this new version 11.6.602.171 has become a nightmare - but I'm afraid it messed up my system big time and I don't know what to do to alleviate this.
Crying HELP!!!!!!!!!!   Is there something I'm overlooking. I'm now screwed - way to go Adobe for releasing such a faulty software product.
Ben Herrmann
North Carolina

It sounds like we've got a number of *different* problems on this thread. I'll try and respond to a few of them.
@filter 2.5 and everyone else running into a green screen issue. Please try the solution outlined in the post below to see if it will allow you to use hardware acceleration. The other alternative is to try a different ATI driver.
http://forums.adobe.com/message/4865912#4865912#4865912#4865912
@pipseer - Somehow Internet Explorer's activex filtering was enabled on your system. This troubleshooting is also described in this FAQ: ActiveX Filtering in Internet Explorer
@Sahloknir - For the sound issue, we're going to want your system specs. Please start a new thread with:
Operating   system
Browser
Flash   Player version
Dxdiag Report Instructions
Sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
@mem2013 - The Flash Player update service will not impact Flash Player's performance. This is a separate service that runs for just an instant on your system once an hour (if you have automatic updates enabled.) Changing it from manual to automatic shouldn't make any difference.

I've just discovered that with the newest version of iTunes you can no longer delete apps you don't want. You used to be able to do so by connecting to to desktop computer and delete them. Tech support said you can't delete apps anymore. Not Good!

I've just discovered that with the newest version of iTunes you can no longer delete iPod Touch/iPhone apps you don't want. You used to be able to do so by going onto iTunes on your desktop computer and deleting them. Not Good! I just called tech support and they said that in this version there is no way to delete them. They also said there have been numerous complaints about this. You can't even delete them from your applications folder. It's as though you're being held hostage to apps you tried, but do not want.
While we're on the subject, I don't like the fact the the iPod touch comes with unistalable apps such as: Passbook, Nike & iPod, Newsstand, and Game Center. Don't want them, will never use them. Give customers the option to delete apps that we don't want. Call Apple's corporate customer care. escalation, and complain untill they fix this.

Actually,
Step 1:
Step 2.
Step 3.
Step 4.
Step 5.
One of us must be wrong.

After update to Camera Raw 8.x, Bridge CS6 can no longer build TIFF previews

I just updated Camera Raw 8.x via Adobe updater.
Even though this should only affect Photoshop, Adobe Bridge cs6 can no longer build previews for TIFFS.
JPEGs still work.
I purged the cache.
Did not work.
All TIFF thumbnails are half the size of regular thumbnails, and the preview is equally stamp sized.
If you select a TIFF, no building of a preview is going on. The stamp sized preview just stays stamp sized.

Solution found:
This was a botched Adobe update.
There has been already a whole thread about the Camera Update disabling many of Bridge CS6 features like previews of TIFFS.
But, obviously, someone did a very poor job at Adobe, and still pushed the bad update out via Adobe update.
Here is the solution of the problem:
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
This was a blunder of the worst kind, and I wish I could bill Adobe for the time lost!

After udating my IPhone 4 to iOS 7 I can no longer find photos in the IPhone file on my computer when connected

After updating my IPhone 4 to iOS 7 I can no longer find any pictures in the DCIM file when I log in through my computer.

there have a recently deleted album , you need deleted again in this album~

Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\

I've recently reformatted my computer, installed the Audigy 2 software, and installed Adobe Audition. Using Line In 2 on the front of my pc, I was able to plug in a guitar, and hear the guitar via headphones. I can use the remote's record button to instantly start recording, with no problems. I can also play audio using Itunes.
When I opened Audition, I immediately received errors saying that my audio device was not configured or whatever, and that I needed to select an audio device. So I went into the Audition settings, chose Soundblaster Audigy 2 [xxxx], specified Line In 2 for the input, applied and exited. Now I can no longer hear the input from my guitar at all, whether in Audition or not. I'm not sure what setting it might have changed on my pc, but any help would be great.

ntel352 wrote:
i opened Surround Mixer, clicked on the red plus (right over Master Volume), only option was "Digital Output Only", nothing else. Installed the latest drivers & software from creative, now I can't hear the guitar input at all. If I play the guitar and record in Audition, i can see the sound levels being elevated, but hear nothing whether in audition or not.
Other audio plays fine.
Audio is not muted for line in 2, line in 2 is selected in recording screen, line in 2 playback volume is not muted, yet somehow I can hear nothing from line in 2, and i don't have to be recording a single thing... It just doesn't play back.
I dunno what's going on, I haven't been messing with the settings or anything...Message Edited by intel352 on 01-27-2006 06:08 PM
Set 1st your .REC to AnalogMix(...) and then select this '+' sign --> untag the option like picture shows.
jutapa

Since my last GarageBand update I can no longer hear the different software amps and effects while I am playing , but they can be heard when I play back the recording

So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
Bryan

I am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .

After updating old Touch to 3.1.3, can no longer hear on Bose Sounddock. How can I update to an earlier version?

After updating old ipod touch to 3.1.3, can no longer hear it on old Bose Sounddock. How can I reverse-update to an older version? Or, is there something else I can do? I can hear the ipod on earbuds, but not on the sounddock.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

I have just set up Itunes match on my new iMac. It is saying I can access all my 9000 songs but only the playlist tab is live. Am I missing something?

Hi
I have just set up itunes match on my new imac. It is saying I can access all my 9000 songs but only the playlist tab is live - I can't access albums or songs. Am I missing something?
Thanks

Hi,
I do not understand your problem. iTunes Match does not change the way iTunes looks. When match process is complete, the match screen tells you how much music you have in the cloud.
Across the top of screen you have options to select songs, albums, artist, composers etc.
Suggest that from main menu, select view>show sidebar.
Jim

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

TS4449 I can no longer hear music on my iPhone unless I use an ear piece could you please help

For a couple of days now I can no longer hear music (or if I play a video with audio) unless I connect an ear piece. I can't find anything in setting that turns this feature on or off unless I have some hardware problem. Help?

Try your volume buttons, if the slider does not show, then there is a short in the iPhone charging port. Clean charging port with toothbrush and small amount of isopropyl alcohol. If still problem the replacement part is iPhone charging port with flex cable, lower mic, and home button flex connector, all a single less than $10 part. Apple handles this problem with Warranty or AppleCare with Replacement iPhone 4S, if no coverage it will cost $199 for replacement iPhone 4S.

Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

Similar Messages

Maybe you are looking for