Hi, i have had to replace my WRT54G ver#3, with Same mode...

hi,
i have had to replace my WRT54G ver#3, with Same model Ver#8. i set up both my desktop and laptop no problems. Got both up and running just fine. However reconnecting with my ITOUCH is another issue. No matter what i have done, including resetting router a second time did not work. I even took it to the Apple store and it connected there no problem. Anyone have any suggestions on what the settings should be. I have the print out of all my network settings available to me.
any help would be appreciated.
thanks,
Linda

If you are online with wireless laptop connecting to your own network ..... I don't think that it is an issue related to router .....
Check the settings in the I-Touch it self...... configure it according to the settings in the router ....
See if it shows connected ....

Similar Messages

I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

If your Mac is from the age of Mac OS X 10.8.2:
How to find your Mac's model and age?
Contact AppleCare to request the prebundled iPhoto be uploaded to the Mac App Store, or the Mac App Store support.
This is just a user to user forum. This link goes direct to the Apple Store support:
http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling

HT1665 hi, i have an iPhone 5 and have had to replace the charger cable 3 times, its cost me a small fortune! i paid for applecare + for it, am i covered?

hi, i have an iPhone 5 and have had to replace the charger cable 3 times, its cost me a small fortune! i paid for applecare + for it, am i covered?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

I have had to replace the HDD and need to reinstall OSX.

I have had to replace the HDD and need to reinstall OSX but cannot find disc that came with the unit, does anyone know where I can get them from or download if possible?
James

[email protected] wrote:
Just how do you do an internet recovery on a system that has a blank HDD with no operating system that the unit cannot boot from????
If your Mac came preinstalled with Lion or Mountain Lion after you install your new blank HDD, restart the Mac while pressing/holding the COMMAND+OPTION+R keys until you see a spinning globe. Make sure you have an Internet connection (WiFi or Ethernet). This will boot into Apple's Recovery HD servers and present you with the OS X Utilities Menu. From there you can select Disk Utility to format your new HDD and then reinstall Mac OS X for the OS that was preinstalled.
Internet Recovery doesn't care if you have an unformated HDD because it boots over the Internet to Apple's servers, not your HDD.

I (mistakenly) updated firmware of my WRT54G Ver 1 with f...

I (mistakenly) updated firmware of my WRT54G Ver 1 with firmware V 7. The router is still working fine but now I have this problem: when I open the router for setting, the menu is unreadable and I cannot acces the menu. How can I repair it, or how to rollback? Thanks for anyone who can help.

Read the support articles for your router. Look for the article regarding a "blinking power light". It describes how to flash your router through tftp instead of the web interface. Follow the instructions and load the correct firmware with tftp to the router.

WRT54G Ver 7 with P2P application

I searched over the Internet for a long time and found that the following facts (problems) on WRT54G Ver 7 with P2P application:
1. No maximum connection port can be configured from the factory firmware.
2. Router hang when maximum connection port reached.
2. No custom firmware like DD-WRT or Tomato can be used in Ver 7.
3. No available official firmware update yet.
Conclusion: Nothing can be done except giving up those applications.
Please correct me if any wrong
Message Edited by human_mage on 07-03-2007 06:44 PM
Message Edited by human_mage on 07-03-2007 07:00 PM

Nevermind. I found the upgrade from local Linksys website:
which fixes the above problems.
(Mod note: Inserted hyperlink to prevent other browser from stretching.)
Message Edited by OnnagokorO on 07-03-2007 11:14 PM

I have three different ipods with music on them and have had to replace our computer as it was in a fire. How can we combine the ipods into one ipod.

We had to replace our computer due to a fire and lost many of the fiels which were on them. Many were music files for the ipods, we have thre. Also, do not have ID's and passwords to the iTunes store.
How can we combine the information so that they are all in each one or at least compbine everything into one ipod?

Just so you know the method suggested by Nelsonleee will cost your $29.95 USD, Yamipod is free.

TS1717 we have had I-tunes on our windows 7 with all of our music for 5 years now it tells us it was not installed correctely

we have had i-tunes installed with all of our music for 5 years, now it will not open we have windows 7 , and tells us that it was not installed correctly why ????

It is all covered in the user tip Troubleshooting issues with iTunes for Windows updates. Your library is safe, but you ought to back it up anyway. You will need to uninstall iTunes and all related components, reboot, delete what remains of the named folders, then reinstall. If you get stuck I'll be happy to try to help but most potential issues are already discussed in the tip.
tt2

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

My iphone 5 will not charge? i noticed it was taking a few attempts to charge since i installed ios7,but recently it stopped working all together i though it may be the charging port so i have had that replaced but that still hasn't worked

my iphone 5 wont charge? I started to have difficulties charging it when I downloaded ios7 and over time it started to become more and more of a problem, then yesterday I thought it might have been the charging port so I got that replaced but it is still not charging. even with both of my chargers and a friends charger it didn't charge, does anyone have any idea what might be the problem? if its ios7 or the hardware? and what should I do i am still within warranty but I'm not sure if that still counts since it has had a part replaced, or would the apple store be able to help me out?

Replacing the charging port (which is NOT user serviceable) has voided your warranty with Apple, and forfeited your abiltity to receive any further support on that phone, including from this forum.
You'll need to look elsewhere for assistance.
Best,
GDG

HT1414 I have intelos and my Iphone does not work in some areas or in my house. I have had Apple replace it 2 times with the same problem. My android worked fine in all places....what's wrong with this? It's killing my business!! Any ideas to fix it??

Please help me understand why my I phone 4s is not working in some places and my HOME!! I have been to Apple 3 times and Intelos 5 times and no one knows whats wrong and they are telling me that no one else is having this problem. It's hurting my business because I can't get calls at home. I paid a lot of money for this and may have to pay to get out of it. I thought Apple was a good company but am changing my mind quick.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Y dont apple have a team we can chat with over phone to resolve issues...I have had money takin out of my account with out me knowing and after several attempts on pc to cancel my credit card still no help

Apple itunes take money out of accounts with out us knowing about it and Itunes have no phone support...to help get your momey back....did a pc take the money out....I have spent 4 hours of my time trying to delete info to no luck

If you believe that your account has been hacked then change your password, contact your credit card company about reimbursement, and let itunes support know that you may have been hacked.

I have had to disable Interclue because of problem with breaking web links, has anyone else experienced this problem

Using Firefox 24.0 and Interclue 1.6.3, is there an update to this release of Interclue.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

For the last week I have had difficulty getting into the Familysearch website with Firefox. It comes up with connection reset. This problem does not occur with either internet explorer or Google chrome. Are you aware of this?

I was told this problem is likely because of an update in coding which IE can read, but Firefox has yet to implement. Is this correct, and if so will it be rectified soon. I much prefer using Firefox than going between to the two search engines as I am having to do at present. Sometimes the home page comes out and the connection times out when processing the request, other times I can't even load the home page

The website's link you provided isn't working here either. Contact the Website's Developers about this issue.

Replaced Zen Vision:M 30gb with same ~ Is it necessary to uninstall/remove original progra

So my Zen Vision:M 30 GB crashed and died a horrible death recently. I made the HUGE mistake of not holding onto my original receipt (duh) so even though it falls under warranty, I can't prove it. OK, that's my bad. I loved my Zen while it was working well so I decided to get another one. I really wanted the 60 GB but Creative Customer Support told me in no uncertain terms that the slimmer version would not be released in the US soon or, possibly, ever. (What's up with that ) So I just want to go back to my happy place with my music. I'm ready to get all set up with my new player. BUT ~ do I need to remove all programs related to Creative and reinstall with the new CD provided with my new Zen It would make sense to do so, I suppose. Start from scratch. But I see four programs listed as Creative in my computer. They are:Creative MediaSourceCreative Removable Disk ManagerCreative System InformationCreative Zen Vision M Will I create a problem by removing all four Is there another program I'm not thinking of that should be removed I rolled back to WMP 0 because I read of so many problems with updating firmware and WMP . Now I read there's a fix in WMP and it's OK to reinstall. Anybody want to speak to that Should I dowload firmware right away So many questions... I just really want to get it right this time and enjoy my Zen life once again. Thanks!AFH

If I would have to venture a guess I would assume that there is an IRQ/Interrupt problem going on with your USB controller on your system.
This can can happen due to the system sharing the IRQ that the USB ports are on with other devices, or sometimes be the result of having an older USB driver or an older driver on a device that shares the IRQ with the USB ports.
Going to a slower hub is most likely slowing down the IRQ request rate (due to slower data rate) which keeps the system from becomming unstable. You might want to check out this thread here for some hints on things to try.
The gentleman in that thread was getting "blue screens" and reboots but its most likely the same basic type of problem.http://forums.creative.com/creativel...uery.id=490850

Hi, i have had to replace my WRT54G ver#3, with Same mode...

Similar Messages

Maybe you are looking for