Hi, I have Photoshop CS5 and cannot view my RAW files. Can anyone help me, please?

Hello,
I have PS5 and I cannot view my raw files. Can you help me?

Hi Gautam,
You are right thank you. I check the article and my camera canon 6D
requires camera raw 7.3 and I have 6.0. What to do then?
I did so research, I tried to open my PS5 and went to help \ update and I
tried downloading update like 4 times each time there was a message "there
was an error downloading this update. Please quit and try again later".
I just need camera raw 7.3 so I can work on my raw files. Maybe you will be
able to help. I appreciate in advance.
Dorota
On Mon, Mar 16, 2015 at 12:03 PM, GautamBahl <[email protected]>

Similar Messages

  • I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?

    I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?

    Ah ok shall try that now, thank you very much for your help

  • I have a new MacAir and don't know how to get info from my USB stick and my SD photo card.  Can anyone help me please?

    I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card.  Can anyone help, please?

    Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
    Matt

  • HT5312 I have just upgraded to a new computer and cannot remember my security questions can you help me please

    I would like to have my security questions reset I don't remember my answer for my favorite car. I just had a new computer set up because my xp was outdated

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (105121)

  • Rented a movie and cannot find it to watch can anyone help?

    Cannot find 2 movies that I've rented and did not watch.  Help?

    iTunes Store Movie Rental FAQ - http://support.apple.com/kb/HT1657

  • HT4972 i am trying to update the software on my Mom's iPhone 3 from 4.2.1 and cannot figure it out.  Can anyone help?

    I am trying to update the software on my Mom's iPhone 3 from 4.2 and need instructions for the iPhone 3G, Please.

    Sorry... but the iPhone 3G can Only Update as far as iOS 4.2.1

  • I need to do slow motion, but i have imovie '08 and i cant figure it out. can anyone help???

    i cant figure out how to do slow motion in imovie '08 and people are saying that i need to get imovie '06 but i cant find it!!!     HELPPPP! i need slow mo!!!!!

    The free program JES Deinterlacer has a slow motion (or fast motion) feature. To use this program you will probably need to look at Help in the JES menu. In the window that opens, click on the Project tab. In the lower right you will see a box labelled "Movie speed". If you want half speed type in 0.5000 (representing 50%). For quarter speed use 0.2500, and so forth. For fast motion, 1.500 represents one and a half times speed and so on.
    In iMovie, right-click (or control-click) on the clip that you want to slow down, then select Reveal in Finder. In Finder, open the clip with JES and proceed from there (as I said, you may need to look at Help).
    The exported clip can then be reimported to your iMovie Event and used in your Project.
    JES Deinterlacer can be downloaded from the home page of the developer Jan E. Schotsman:
    http://www.xs4all.nl/~jeschot/home.html
    It is also downloadable from this Apple site (but it's an earlier version):
    http://www.apple.com/downloads/macosx/video/jesdeinterlacer.html
    John

  • My time capsule runs very slowly and keeps disconnecting my internet connection, can anyone help me please?

    Hello all I have recently pulled out my 3TB Time capsule and attempted to use it to back up my all Mac network, starting with just my desktop. I gave up on it before and started using Time Machine with WD EHD's which work fine. The reason that I gave up was that the Time Capsule kept freezing and hanging and I couldn't rely on it for a back up. I have reset it to factory settings and reconnected it as per the instructions, using it to extend my network, the hub is a BT infinity setup. Anyway it looks like it is going to run, then keeps shutting down my internet connection and I suspect it is taking longer to run the backup than it should. Has anyone else had this problem or can help please?

    What model is the 3TB TC??
    If the computer is using Yosemite the setup of the TC needs to be right. It can also be hardware issue if you are talking about the previous gen4.
    Here is a list of things that can help with yosemite.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Accidently i have removed the disk utility can anyone help me please

    i have accidently removed the disk utility.... can anyone help me please..

    The problem with junk utilities such as MacKeeper is that they are capable of causing damage that is impossible to inflict on a Mac using normal means.
    MacKeeper is not the only such utility; it is merely the most visible due to its aggressive and highly successful marketing tactics.
    Get rid of MacKeeper by following these instructions exactly as written:
    If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them.
    Quit the MacKeeper app if it is running.
    Open your Applications folder: Using the Finder's Go menu, select Applications.
    Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
    You will be asked to authenticate (twice):
    You do not need to provide a reason for uninstalling it:
    Click the Uninstall MacKeeper button. You will be asked to authenticate again.
    After it uninstalls you may empty the Trash. All that will remain is an inert log file that does nothing but occupy space on your hard disk.
    Next: Test your Mac for operation. If it is still exhibiting problems, you may need to undo damage that occurred as a result of using MacKeeper. At the extreme this could include erasing your Mac and rebuilding your system from the ground up, but start by downloading and installing the OS X Combo Update I linked earlier. That may be all that is necessary to restore OS X to normal, but other programs you installed may need to be installed again.

  • I have Photoshop CS5, and use windows XP.  I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

    I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years.  When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but  the problem remains. Looking for help.  Dan

    Thanks for your response, I was able to open bridge from File-Browse in Bridge.  This worked, but was not able to go back to the way I always opened Bridge.  At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu.  The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal.  This time it did not go back to normal after several attempts.  I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens.       And yes I am using Mini Bridge in photoshop CS5.  Thank you for your help.  Dan

  • I already have Photoshop CS5 and want the CS6 what should I do?

    I have Photoshop CS5and want the CS6. what should I do?

    thai you very much!
    Marianna Cury
    www.mariannacury.com.br
    [email protected]
    Tel. (11) 5044-0632
    Em 29/01/2015, à(s) 18:58, John Waller <[email protected]> escreveu:
    I already have Photoshop CS5 and want the CS6 what should I do?
    created by John Waller in Photoshop General Discussion - View the full discussion
    Creative Suite 6
    Click Buy (a pop up window will appear)
    Ignore the Cloud offer (white box, RHS)
    In the grey box on the LHS ("With CS6"), from the dropdown box select Upgrade (not Full) then click Select
    Complete your purchase
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7144926#7144926 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7144926#7144926
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

    I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
    It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
    Tony Fletcher

    You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

  • I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?

    I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?
    I went into edit preference and all the start up scrips are selected so what else is there?

    When you installed CS5, you have a chance to register it. If you do, your serial number is on file under your Adobe (My Products). If you did not, you have no serial number on file and even worse, no proof you own it.
    You do not have your serial number copied down anywhere? Hard to believe you tossed the dvd box and all the documents away.
    So Help > Register might give you a chance to do this without you knowing the number.
    If not, you may want to consider the Photography Plan. Creative Cloud Photography plan | Adobe Creative Cloud

  • I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

    I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?  Thanks!

    This is the last paragraph from my very first response to you, post #1 in this thread:
    …Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs.  [emphasis added]

  • I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

    I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
    It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
    Any one with ideas/

    What is your screen resolution?
    What operating system?

Maybe you are looking for

  • How to find the user who have restarted the schedular.

    Hi, We are using the cron trigger schedular to initiate the BPEL process. We use the oc4jadmin user to login into the em console of SOA. Somebody has restarted the schedular on production server which we can see in the log file. But is there any way

  • Download of a webform within a BSP application

    Hi SDN members, I wrote a ESS BSP application with a 3 step wizard. Within the first step the user can enter some data in some form fields. In the second step a webform (SMARTFORM) with the form data is displayed and in the third step the user can sa

  • Issue with Sender Side JDBC processing

    Hello, I am facing some problem with Sender Side JDBC Processing. I am polling the DB MY SQL Server 2000 and using some SELECT statement i picked up some data and updated the DB with an UPDATE statement. At the receiver side i am using RFC adapter wh

  • OS4.1.4 and Windows 7

    Is anyone using OS4.1.4 with Windows 7?  We have a Palm M100 that is used for updating software on bill validators. But our new laptop has Windows 7 on it and it does not seem to work properly using Palm OS 6.2.2 with the older M100. We usually need

  • Search and gnome-documents won't find local files

    Hello all, I can't say for sure whether this behavior started before or after I upgraded to GNOME 3.4. Anyway, this issue is that neither gnome-documents nor the default search from the Activities menu (does that still exist?) can find any of my loca