Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.
Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.
but, when I back to read my old emails in inbox it's gone away, I have backed to setting and return the previous
incoming mail name, but also I did't get the old emails. where I can find the old emails in my IPAD2 ?
It is only the link to your emails which are 'stored' on your iPad. You will have to enter all proper email addresses to get the message associated with them, which, in practice, means multiple accounts. If all still does not work try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].
Similar Messages
-
HT5361 What is the incoming mail server when setting up a apple email address?
When setting up a new email account the field for the incoming mail server is greyed out. How do I add the info?
It should load that automatically. It varies.
It will be some variant of imap.mail.me.com. That may get it to look up the correct one. -
I'm tryingt to set up my email through my school account and i'm not sure what it means when i'm asked to enter a incoming mail server and an outgoing mail server. Help would be appreciated thanks
Since no one here has any idea about what type of mail your school offers...you don't mention what school...your question, as asked, can't be answered. What don't you contact your school's IT dept., or look online. Most schools have instructions on how to do so online.
-
The IMAP sever that automatically set up is p08-imap.mail.me.com?
So I guess using Apple Token for authenication is OK, instead of the prescibed Name and Password per the http://support.apple.com/kb/HT4864?
-
The outgoing mail server on my desktop just stopped working - i have checked all of the settings and everything seems to be correct - any suggestions?
Are these the settings you are using?
Setting up your Verizon Online email with Mac OS X Mail
Start OS X Mail.
From the Mail menu, select Preferences.
Click Add Account.
Click the Account Information tab.
From the Account Type menu, select POP.
In the Description field, enter a name for this account.
In the Email Address field, enter your Verizon Online email address (format is [email protected]).
Type pop.verizon.net in the Incoming Mail Server field.
In the User Name field, enter your Verizon Online user name.
In the Password field, enter your Verizon Online password.
From the Outgoing Mail Server menu, select New.
The SMTP Server Options screen appears.
Type smtp.verizon.net in the Outgoing Mail Server field.
Note: Leave all other settings in the SMTP Server Options screen with their default settings.
Click OK. -
Trouble with Email after Update - Help - No Incoming Mail Server
I updated my iPad 2 to the new IOS 5 software and have been unable to use the mail function. I have tried deleting the account re-installing, turning on and off the iPad, etc. but it always prompts me with the same message;
The IMAP server, "apple.imap.mail.yahoo.com" is not responding. Check your network connection and that you entered hte correct information int eh "Incoming Mail Server" field.
All the rest of the Network functions seem to be working correctly. One additional detail - for some reason it does not seem that the "Incoming Mail Server" field downloaded during the update because there are no options (or maybe I do not know how to get to it) on how to change the incoming mail server information. This is true for both my iPad and iPhone 4.
Any suggestions or help?I updated my iPad 2 to the new IOS 5 software and have been unable to use the mail function. I have tried deleting the account re-installing, turning on and off the iPad, etc. but it always prompts me with the same message;
The IMAP server, "apple.imap.mail.yahoo.com" is not responding. Check your network connection and that you entered hte correct information int eh "Incoming Mail Server" field.
All the rest of the Network functions seem to be working correctly. One additional detail - for some reason it does not seem that the "Incoming Mail Server" field downloaded during the update because there are no options (or maybe I do not know how to get to it) on how to change the incoming mail server information. This is true for both my iPad and iPhone 4.
Any suggestions or help? -
Using Mail with Yosemite 10.10.2.The incoming mail server keeps changing by itself and means I can't access my mail. I go to preferences and find that the new incoming server is greyed out . I then have to remove the accounts and then add them again with the correct server. The incoming server which is greyed out is imap.gmail.com
Try Mail/Preferences/Accounts - select the account, then go to Advanced and deselect "Automatically detect and maintain account settings".
-
LMDB - SLD "Source and target system have the same object server name"
Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AMproblem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph -
Can anyone help me with setting up my Mac Air, to allow me to have an email template open up in Outlook instead of Mail when I click on an email address on a website?
All the limits you mention 100 e-mails at a time and 500 in a four hour time frame are limitations imposed by your mail provider, not Thunderbird. Thunderbird places no restrictions on the maximum number of recipients.
Have you tried turning your computer off for a few minutes? -
hi i'm trying to install updates but Name and then the password I have for the account won't let me in. Is my name my email address?
Updates do not normally require any kind of password access. It is more likely your machine's security is asking for you to allow things to be updated.
-
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?
You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default. -
If I have two emails for my iMessage how can I see or receive my msj or the email that is not the primary email
It's basically ment for iMessage and FaceTime. I might be wrong but this can only be done between two Apple products that allow this function. You won't receive an email if I sent you an iMessage to a secondary email you use for iMessages. You would only receive a text message. Now if someone using a PC sent an email to the secondary email you use you will receive an email not a text message. The secondary email is used basically if you do not have a data plan and you're connected to wifi you can still send iMessages using those emails you provided.
-
Does Adobe have an email address? I have bought the wrong OS I need mac but got windows
does Adobe have an email address? I have bought the wrong OS I need mac but got windows
Please see Return, cancel, or exchange an Adobe order -
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html -
I have 47 emails in my inbox, but when l open mail App the screen is frozen & no emails are visible. Can anyone offer advice?
On you iPad, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it on eby one until all cleared
Now do a Soft reset of your iPad:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, check and see if this resolves the issue.
Maybe you are looking for
-
Step-down voltage converter or traval adapters?
Hi, I am studying in Ireland with my iBook that I bought in the US - as well as a few other US electrical appliances. I have been using step-down voltage converters, but having problems. I just discovered today that I was using too many watts for the
-
This is my sender message Payload : <?xml version="1.0" encoding="UTF-8"?> <ns0:INOVIS_Sender xmlns:ns0="urn://Inovis.com"> <B>1</B> <B>2</B> <B>3</B> </ns0:INOVIS_Sender> This is my receiver message payload : <?xml version="1.0" encoding="UTF-8"?> <
-
When I open iMovie (09), the app searches for missing iPhoto files. These are files I deleted. I have to close about 30 dialog boxes before I can start using iMovie. How do I make this stop?
-
Timing / buffering problems
Hi, I am trying to operate the SRS SR400 photon counter using LabView. I have an optical chopper as the external trigger and I am using both channels A and B in a gated way. Basically I can get the photon counter to operate perfectly, but if I collec
-
Cursor is freezing often after installing leopard
I don't know if this is just a coincidence or not but my cursor freezes often since I installed leopard on Friday. How can I solve that? So far I have been turning off the computer then turning it on to make it work. Help