Hi I have problem and I don t know how I can fix it
hi I have soft mac os x 10.4.11 and I want to get out from mac and install mac os x 10.6 somebody can help me?
I think you ran out of space from the Built in memory your iPhone has?
Those 15GB are cloud storage and not memory built -in.
The 15GB you purchased are cloud storage and does not increase built-in memory.
http://support.apple.com/kb/HT4874#
Similar Messages
-
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
I have just got the new iPod touch. Everything is working except my iMessage and I don't know how I can set it up.
Illaass
Gave my grandsons iPods for Xmas. Looks like one of them downloaded an app (text+) and must/may have deleated on hisiPod the iMessage app that was included on both with both iPods.
I want to ditch this new app (text+) and return iMessage to his phone as they both are wifi only and iMessaget is what they should both use. Ialso have a iPad (wifi only) and a iphone (both on iOS5) and a MacBook on 10.7.2
Any help as to how to do this (I would prefer not to due a full restore to the affected iPod if possible) -
My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
GraciI think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2) -
When I got my iMac a few days ago it started instantly by showing the tool bar at the bottom and was ready to use. Somehow I have activated the monster known as keychain and my life has changed. How can I get this thing back into the bottle?
TheEntireSky, that is actually a different problem, specifically related to Safari.
Safari stores passwords for each site, unless you tell it not to. Some websites will place a cookie on your system that enables them to log in automatically. These are two separate functions. Each one can be removed or disabled separately.
I suggest you post a new question describing what you want to do. -
Everything was OK earlier, but when I started Firefox again, the only thing that shows is the tab! I can't search, there are no menus, I can't enter a URL, I can do nothing! I had to (shudder) use IE to enter this question!
Help!'''<u>Menu Bar</u>''' (File, Edit, View, History, Bookmarks, Tools, Help) , see: <br/>
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
* Press F10, Menu bar will appear, click View, click Toolbars, click Menu bar
* Press ALT, the Menu bar will appear, click View, click Toolbars, click Menu bar<br />
* Hold down the ALT button while pressing V+T+M
'''<u>Navigation Toolbar</u>''' (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Do one of the following
#click View > Toolbars, click on "Navigation Toolbar" to place a check mark, OR#right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: <br />
#*https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
#*http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
#*http://kb.mozillazine.org/Toolbar_customization
#*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
#*http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
'''<u>Bookmarks Toolbar</u>''': Same procedure as Navigation Bar except click "Bookmarks Toolbar".<br />
'''<u>Status Bar</u>''': click View, click Status Bar to place a check mark<br />
'''<u>Full Screen Mode</u>''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen<br />
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars -
Can anyone out there tell me how to find my serial number on the PS app? Where is it?
Hi Erik,
I see your CS6 product registered under the Adobe ID you've used to log in here for the forum but I don't see the CS3. Do you have your CS3 serial, or is it possible it's under a different ID? I'll shoot you an email.
For installation on a device that doesn't have a media drive you can find legacy installers here: Other downloads
(Microsoft and Apple both do not sell systems with DVD drives these days, one of the reasons we're moving to download only and providing legacy downloads at the link above) -
I want to change the email that iCloud uses to send security answers to and i don't know how.
Hi, i just installed my mavericks and i was going through all my settings and keychains and everyting. Last month i deleted the email account that i think we use to send the answers of the security questions on and i forgot the answers. I want to change the email that iCloud uses to send security answers to and i don't know how. Can it be done?
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(91794) -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I use dial-up, FireFox 5.0, Yahoo addition 1.8. My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out. Using Vista
I'm having the same problem. Dreamweaver is supper slow. Uploading and downloads from the server... any server I use two different servers. It times out all the time. Menus are slow too.
I'm on a MAC Pro, 6 gigs of ram no issues with anything else. I have talked to Apple they have checked everything for me. They say it's Dreamweaver. I've noticed the Dreamweaver is talking to the FTP even when I'm not doing anything.
I've tried cleaning out my MAC caches, turning off file check and check out. Still really slow. I've worked with Dreamweaver for 6 years never any issues like this before. 18 seconds to upload a 4 kb file. 11 seconds to download the same file. -
Hi I have got a problem where when I'm on safari i get these virus pop ups asking me to down load this and that and i don't know how to make them stop.
Click here and run Adware Medic.
(113236) -
Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you
Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply. -
I have just purchased a new iPad from apple and I don't know how to use it. is there somewhere that I can learn the basics
Out of a silly curiosity, in what way did Ralph's reply solve your problem? (not that Ralph doesn't deserve recognition, mind you.)
-
I have canon mp610 printer connected to my mac lion pc...It is always offline and i don't know how to fix this problem.
Does File > Work Offline has a check mark when that happens?
You can try to create a new Boolean pref with the name network.manage-offline-status and set the value to false.<br />
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status
Value: false
See also http://kb.mozillazine.org/about%3Aconfig -
I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank youSo it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB
Maybe you are looking for
-
I recently installed itunes from the disk that came with the ipod nano. The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did
-
Pb install Oracle 9.0.2 on HP UX 11.00
I am trying to install oracle9i (9.0.2) on an HPUX 11.0 Box (64 bit). I have completed the pre_installation without error. However I am unable to execute the runInstaller command. $ /var/disk/Disk1/runInstaller /var/disk/Disk1/runInstaller: ./runInst
-
Error executing SSIS packages from Agent
Hi All, I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from Orac
-
Hi, In our scenario we load delat data into ODS and then delta data into Cube. I added new characteristics in ODS as well and Cube to fill in based on other existing field and a table lookup for value. I wrote the routine in ODS Update rule. Afte
-
Public folders not replicating Exchange 2010
Earlier this year I did a migration from a single 2003 Exchange server to a single Exchange 2010 server. I didn't notice until recently that my GAL isn't being updated in cached mode in Outlook 2010+ but is in OWA and with cached mode turned off. So,