Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night

Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night but my iPhone 5 and Mac mini still connects to the same wifi network I have called apple support and they had no clue what the problem is, have tried changing the http settings to auto and resetting the network setting on the iPad but no luck so far would appreciate any help thanks josh

One possibility is that there is an allowed time period for access programmed into your WiFi router for the MAC address of your iPad.
What make, model, and version WiFi router do you have?
Another possibility is that you are getting some WiFi interference from a nearby WiFi network which is automatically turning on at 9:30 PM. A nearby home security system could be the culprit.

Similar Messages

  • I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

  • My ipad suddenly stopped connecting to the wifi network. My lap top still does however

    My iPad was working fine with the wifi at my house but suddenly stopped working today. My laptop still connects just fine but I can no longer get my iPad to connect.  Any suggestions?

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I cannot see my Hotmail saved messages on my iPad 4.  I do not have this problem on my iPad 2.  All settings look identical.

    I cannot see my Hotmail saved messages onmy iPad 4.  I do not have this problem on my iPad 2.  The settings appear identical.Any suggestions to cure the problem?  Thank you.

    My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
    Kind regards,

  • Hi. i have this problem for my ipad 2.it is constantly turning on

    hi. i have this problem for my ipad 2.it is constantly turning on & off on it's own. but it will only do so, when it is plugged in on an electric outlet. otherwise, it cannot be turned back on. when it is plugged in, & it is off, the charging icon does not appear, but when it will turn back on, there is that charging lightning symbol. i tried forced rebooting, resetting, still nothing works. please help!

    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
     Cheers, Tom

  • For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem.  How do I stop that from happening?

    For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem.  How do I stop that from happening?  I keep having to delete my library!

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

  • Hi I have this problem that when I send a mail to someone mails that I have already sent out end up on this email sometimes two or even twenty different mails end up going to the person I'm send ding a mail too please help

    Hi I have this problem that when I send a mail to someone mails that I have already sent out end up on this email sometimes two or even twenty different mails end up going to the person I'm send ding a mail too please help

    I have been doing some test now and have found out that my mails are being merged according to subject eg, so if I use cleaning goods as a subject and send out a new mail all mails with this subject are sent to the one person

  • Ebooks,  half the books I have bought have complete sections or chapters missing.  Does anyone else have this problem or am I doing something wrong in the downloading of them

    Half the ebooks I have bought from iTunes have large sections or complete chapters missing from them which is beginning to seriously irritate.  Does anyone else have this problem or it is something to do with the downloading. In which case does anyone have an answer?

    You should be able to delete and redownload them via the bookshelf in the iBooks app : tap the Edit button top right of the shelf, select and delete the books, then go into the Store via the button top left of the bookshelf, and in the Purchased tab (bottom right of the store) find and re-download the books.
    If they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those books and use the 'Report a Problem' link.

  • Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text.  I didn't have this problem with Acrobat 9 standard.  What is the remedy for this.  If this is the best I can expect, I won't be able to use X standard.

    Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text.  I didn't have this problem with Acrobat 9 standard.  What is the remedy for this.  If this is the best I can expect, I won't be able to use X standard.

    I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
    If you must go to an image format, try PNG.

  • I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    Try this:
    Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
    If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
    If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

  • My ipad is not connecting to the wifi..how do i fix it i have done everything apple as told me

    my ipad is not connecting to the wifi, i have reset everything even the wifi. how do i fix it?

    Forget this Network and try connecting again.

  • TS3361 Hello.. I have a MACBook that is 3 years old..recently the WiFi status is stuck in the off position..how can I get it to turn on.I tried turning it on but its not budging.

    Hello.. I have a MACBook that is 3 years old..recently the WiFi status is stuck in the off position..how can I get it to turn on.I tried turning it on but its not working.

    There are some instructions here.
    wireless issues with Mavericks in particular.
    This might fix some issues with the Airport Extreme or TC if people upgrade installed.
    https://discussions.apple.com/thread/5219345?tstart=30

  • My iPad is not connecting to the wifi although my laptop and iPhone are. the screen saysno internet connection

    My iPad has stopped connecting to my wifi and says No Internet Connection, even though I have 3 bars wifi and my laptop and iPhone in the same room are connected

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I want to check that how many users are connected to the wifi which i m using at present

    i want to check that how many users are connected to the wifi which i m using at present???

    Go to Utilities > Airport Utillity
    If you click on your router it should show you the "wireless clients" that are connected

Maybe you are looking for

  • [resolved] Can not install mysql

    Oooops, I fixed it. Somehow /tmp had wrong permissions.. Hello, after an upgrade my mysql dameon did not work anymore so I did what https://bbs.archlinux.org/viewtopic.php?pid=889846 says and removed all configs and removed it. Now pacman -S mysql gi

  • Can't launch Safari after Software Update

    I can't start Safari anymore and I don't know what to do. In short, click on the dock and no bounce. Double-click on the icon within Applications and it doesn't launch either. These problems, I'm guessing are a result of the combination of objects de

  • Not able to Print Invoice thru Crystal Integration

    Hi All, Could anybody help me on the issue given below. One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Er

  • SUMGT Problem

    Hi!!!. I have a problem in Analyzer. I have a column with a Formula that is: ( 'G4A' <> 0 ) * ( NODIM ( 'G4A' * 0 ) + 1 ). This column gives the result 1 or 0. The Overall result of this column is the SUM of the numbers. That´s works perfect. The pro

  • Automatic popup for reason of rejection after async method

    Hello, How to get a <b>reason of rejection</b> popup after an asynchronous method? Currently I am using the standard <b>singlerelease</b> method of object type BUS2012 for the release of purchase order. Now once this order gets rejected the user want