HI I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7. NOW I W...

HI
I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7.
NOW I WANTED TO UPGRADE THE FIRMWARE.
I CHCAKED OUT THE SITE I COULD'NT FIND THE DRIVERS FOR THE VER 7
EVERYTHING ELSE OTHER THAN VER 7 IS PRESENT ON SITE I WANTED TO CHEAK OUT WHEATHER THE VER 7 FIRMWARE ARE AVALIABLE OR NOT PLEASE HELP ME TO DO SO
THANKS
PRAVIN

hi helm
Thanks a lot for your suggestion i got the required farmware
thanks
prav

Similar Messages

I have WRT54G Wireless Router on my main computer (VISTA...

I have WRT54G Wireless Router on my main computer (VISTA) and I am trying to set up A Linksys Compact Wireless-G USB Adapter (WUSB54G) on my other computer (XP). It is all setup, however I am getting the message "You are connected to the access point, but the Internet cannot be found." To further complicate the issue, when I check the IPCONFIG on the XP computer, I get back some weird IP address that is outside my router's network, even though I'm using DHCP.
I know the router is working - my laptop associates through the wireless network with no problem, and I can access the network printer that is also wired to the router. The problem seems to be in the configuration of the old XP computer with the new WUSB54G adapter.

Try following settings ....
Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address) for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
Thansk in advance

Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP) in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again

HT1218 do you have to have a wireless router with the macbook air

do you have to have a wirelss router with the macbook air if you do not have internet in your home

If you do not have internet at home - MacBook Air works perfectly fine offline.
It is advisable to connect it to the internet ocasionally to update it.

WRT54GS Wireless Router with Speedbooster.... I need help please!!

Please... anybody!!
I have the above router and all my PC's/laptops are wireless....
They're all set to acquire IP addresses automatically frm DHCP, but I'm still getting IP address conflicts..
When this happens, one PC is fine, but another one will have trouble acquiring one... now this shouldn't happen right?
As far as I can see, the router is set up properly... not changed anything really, apart from the security settings....
This only happens occasionally, but is still annoying....
HELP!!!!

What's the DHCP client list? How do I check that?
I'm assuming it's an IP conflict because whenever the PC tries to acquire an IP address to connect, the other PC that's already connected will pop up with an IP conflict message. And it goes away if I stop trying on the other machine....

WRT54G Wireless router works on desktop, but not laptop

I have a WRT54G wireless router with version 1.00.4
It works on my desktop, I can log into the net no prob
My laptop however (dell w/ windows xp) does not even recognize it.
Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
My desktop is windows xp, and so is my router.
Any helpwould be greatly appreciated.

i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
1.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
2.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
hope this will help you...
~ lyf_R_foeittee ;o) ~~

Tried to update WRT54G wireless router, upgrade failed, router broken.

I tried to upgrade my new WRT54G wireless router with the new firmware. I got an error message that said "Upgrade are failed". I used the correct version of the firmware for my router (I have a Ver 8). I tried to factory reset, but the router is still broken. Any suggestions on what I could do? The entire page I access via IP is broken. All the text is messed up the the links don't work. I can use the router to access my network, but it will not connect to the Internet at all.
Message Edited by Trax416 on 02-05-2008 01:05 PM

I have no firewalls, and it's for sure not a computer related problem. I have tried on three seperate computers. The upgrade failed, it won't let me access the setup page. I have tried to go onto the Internet since, and it lets me, but 80 percent of all Internet sites don't work. This is what shows up in the router firmware page when I go thru the IP. ýýý†††···ÇÇÇ¶¶¶¼¼¼öööiiiSSS¿¿¿ÂÂÂßßßààà´´´¯¯¯***^^^uuuAAAllØhhÐééé²²²äää–––ÃÃÃBBBâââmmm¾¾¾DDDWWW˜˜˜“““ìììÎÎÎ LLLaaajjÓyyy ¸¸¸ÝÝÝøøøÉÉÉãããÞÞÞ:::×××ÓÓÓkkk’’’nnn™™™³³³©©©ççç œœœxxx~~~ÁÁÁffÍ```ggÍ CCCiiÐ‘‘‘ ŠŠŠ@@@žžž YYYµµµÐÐÐªªª¥¥¥??9èèè___ÆÆÆ‰‰‰ÜÜÜšššÒÒÒ¨¨¨¡¡¡vvváááØØØÙÙÙƒƒƒTTT$$$ÍÍÍŒŒŒÚÚÚÔÔÔ••• ËËËÅÅÅëëëººº‚‚‚°°°|||}}}jjÕVVV„„„\\\]]]rrrbbÅ??;ŸŸŸ[[¶»»»[[[%%IGGG???eeË£££ííí‡‡‡fffooÝOO __¾kkÕGGŽ``Á88oddÇKK•CC†hhÏîîî±±±>>|SS¦77mÛÛÛæææpppÖÖÖ®®®ÈÈÈHH êêê??)ÌÌÌÊÊÊÄÄÄ????:llÙZZ²ŽŽŽWW®99q;;vAA‚ÿÿÿffÌ Message The rest of the pages in the setup menu ether show up blank, or give the same message as above.
Message Edited by Trax416 on 02-05-2008 01:35 PM

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

Pls help me.i have a problem with WRT54G wireless router.

Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

I recently bought a WRT54G wireless router along with a W...

I recently bought a WRT54G wireless router along with a WUSB54GC compact wireless adapter and set up both products as directed.I get a message saying connected to the access point but cannot find internet. While connecting to my internet directly,(using a fiber optic cable with no modem necessary)it connects to the internet however using the modem,wired or wireless it still gets the same error. I am not computer literate,so i don't understand abbreviations or where to go to input information into certain areas,so if anyone could help me with step by step information I would be very grateful. Thank you and happy holidays.

Let me know the Model number of the adapter & the operating system of the computer ......so that i can assit you further ... ..

Problem with wired computers on a WRT54G wireless router

I have a WRT54G wireless router that has been working flawlessly up until now. On Sunday, my son informed me that his computer, which is wired wasn't connecting to the internet. Upon further investigating, we found out that our wired computer in our gameroom wasn't connected either. However, our main pc, which is also wired, was connecting just fine. I checked my laptop and several other wireless devices and they were online as well.
Here's the weird thing. In my gameroom, I have just one cable coming into the room from the router. That cable connects to a 5 port switch which then connects to my gameroom pc, Xbox 360, and Playstation 2. I checked my Xbox 360 and it connected to Xbox Live as soon as I turned it on so that told me that I had connectivity coming from the router and the switch. But why was the pc not connecting?
Anyway, I restarted the router, but that didn't fix the issue. I then restarted my cable modem, a Motorola Surfboard, and the router and the issue was resolved. All my pcs were connecting again.
Everything was fine until yesterday when the exact same issue occurred. This time the modem and router restarts did not fix the problem. Again, I have connectivity coming from the router to the 5 port switch because my wired Xbox 360 connects just fine, but my wired pc does not. My son's wired computer is not connecting, but my main pc is. I cannot figure out how to resolve this issue.

Might be possible that the router need reconfiguration ... So reset the router...for few seconds ... after reset ... Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as “admin "" all in lower cases and then click on ok. On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button. Now click on the sub tab ""MAC address clone"". - Click on enable - Click on clone your PC's MAC button and then click on the Save Settings button. Power cycle the network again & see if it works ...

HI I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7. NOW I W...

Similar Messages

Maybe you are looking for