Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?
Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?
You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig
Similar Messages
-
Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,
I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed) -
Unable to Complete Your Request when Registering for a free/trial download
Hi! Trying to download Standalone Converter I get the [Register] (for a free download?) button leading me to VMWARE END USER LICENSE AGREEMENT which I obviously accept and after I [Continue] my.vmware.com presents me with
"Unable to Complete Your Request
We cannot complete your request at this time. We are working to resolve the issue as soon as possible.
In the meantime, you can:
* Reload this page
* Go back and try a different link
* Go to My VMware home page
* Get Support"
My Profile is ok, my browsers are Firefox, Chrome, IE, latest ones. How do I get my.vmware.com to trust me enough to let me download free products? Thanks in advance.Hello,
This happens occasionally. Did you receive any emails from VMware about the download/trial license? You can also check your My VMware to see your current trials, is this one there?
Best regards,
Edward L. Haletky
VMware Communities User Moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014
Author of the books 'VMWare ESX and ESXi in the Enterprise: Planning Deployment Virtualization Servers', Copyright 2011 Pearson Education. 'VMware vSphere and Virtual Infrastructure Security: Securing the Virtual Environment', Copyright 2009 Pearson Education.
Virtualization and Cloud Security Analyst: The Virtualization Practice, LLC -- vSphere Upgrade Saga -- Virtualization Security Round Table Podcast -
I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
had anyone this problems?Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
If I own a previous lightroom program installed in my desktop may I open the same program in my desktop?
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?
Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost -
i cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me
Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick! -
Can I authorize mulitple apple ids on the same device so that what is purchased on either account will be loaded in both devices without having to use the same ID?
My wife has a laptop and an iphone 4s, I have a laptop and and iphone 4s, our two sons have our old iphone 3s, we have an old laptop for our sons to use. Our old iphones for our sons are deactivated as phones - so they are used as i-touches for songs, pictures and aps. I want to use icloud (which I'm new to) to hopefully have all four iphones and all three computers stay synced with at least music - if not aps and pictures. My wife has an apple ID and I have one. I'd like to authorize all three laptops for both apple IDs so that we will still have our own accounts, but everything either of us buys will be automatically loaded into all three laptops and all four iphones. Can this be done?
Thanks,
sstultzcostelloEach person in your home can have their own Apple ID provided it is tied the their own separate email address.
iTunes permits up to five authorized computers connected to a single Apple ID: iTunes Store- About authorization and deauthorization.
For this all to work well, however, each user in your household should have a separate user account on the computer they commonly use. -
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
-
I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?
It shows up in the store as a universal app, so you should be ok to go.
-
Can you install CC on two separate computers under the same A/C
Can you install CC on two separate computers under the same A/C
yes, adobe single user licenses allow up to two concurrent installation/activations.
-
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
I am unable to redownload OS X Mavericks on a Late 2013 new Macbook Pro 13". I get a message saying "We could not complete your purchase" " OS X Mavericks can not be installed on this computer"
I nee an easy way to resolve this with Apple.why is it this problematic to resolve?! obviously there's a valid installer image for our macs, why can we not have access to it to use on our laptops?
I do not understand, nor accept the explanation given before - about it being a newer model... it doesn't make sense... how does that translate to "no download available".
also, if it was a valid point - we would have had that download with the release of 10.9.1 - which we don't. -
Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop. (Same CS5 and plug-ins installed OK several years ago on a Vista laptop. Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install. Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document." Any solution?
CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
So this means you will have make a list of the updates that failed, go here: Product updates
and manually download/install from there.
Gene -
If I register as individual for Developer Program, can I change to company at later date?
I've done that.
You have to fax Apple the documents of incorporation (the stuff you get from the state government in the US) that show you are a real business (or at least hoping to be).
They guide you through the process.
It took 2 or 3 days to complete.
Pretty simple.
Maybe you are looking for
-
I recently got an ipad and am having great success with that. It shows and syncs everything it's supposed to, but my calendar is not syncing with my iphone and also doesn't show up in icloud. Just a side note.....my reminders sync on icloud, iphone
-
2 steps STO - Load Transfer Points
Hi gurus, Could you please advise how we could manage below flow. We would like to have a kind of 2 steps STO in case we have to deliver from Plant A to Plant C (STO with vendor Plant A and as receiving plant, Plant C) but we have to transit by Plant
-
Importing into Lightroom 5.3
I've been using Lightroom since it's inception. I tried loading photos onto a new computer(Windows 7pro 64). Photos in a folder with a description did not import. If I go to the source drive, I can select individual folders and all the pictures com
-
Reading untagged documents keeps popping up
My computer has Windows 7 Home Premium 64bit and Adobe Reader 9.4.3. When I open up a pdf, a window Reading Untagged Document pops up wanting me to take an action. I have looked at all of the preferences as to how to turn this off and have not foun
-
I build all my viewobjects in the same structure file, but the tabs in the header of pages are very wide, so I want to gather it as sub groups and from each sub group i will see the tabs in this subgroup examlpe In each page I following tabs display