Hi I just purchased a WVC54GCA wireless video camera I am having a problem with the setup software

I just purchased this wireless video camera and I am trying to set up the wireless key. I have put in the SSID and then the option of WEP (128 bit) or 26 character key. I then try to input the 26 character key and the text box can't take that number so I am supposed to click next and enter the key on the next page..... only it is at the last page where you would save the settings and I don't see anywhere to edit it. I know I get a bit hurried is there something I am missing?? I would appreciate any assistance you can offer. Thanks a ton

If you are trying to configure your Camera using the Setup disk, you can exit from the setup and configure all the settings on your Camera Manually.Follow the Instruction below to Configure your Camera manually..
1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4...
Click Here and follow the instructions to configure the camera with the Wireless Settings.

Similar Messages

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
Angela

You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck.

HT1567 i can not sync my new purchased music into my ipod, it states there is a problem with the drive

i can't sync my new purchased music into my ipod, it states there is a problem with the drive.

Hey Texasdee07,
I found the following information that should resolve the issue:
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
via: 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
http://support.apple.com/kb/HT1207
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Why the apple store billed me with the purchase that didn't go throug because there is a problem with the server

Why the Apple Store billed me with the purchase from City Ville that didn't go through because they have problem with the server,

This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.

I'm having a problem with the new Airport Express I purchased. My printer (Canon MG5220) is recognized over this new network by my laptop, iPad, and iPhone wirelessly, but several Apple products (Pages, Photos most importantly) can't seem to "see" my Pro

You've been misled by poor field labeling on this forum into typing your complete message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.
Perhaps it was cut off as being too long, but the description of your problem was cut off at "can't seem to 'see' my Pro". Please clarify what you mean by that.

FireFox is not playing sound on any video files. Youtube, Hulu, etc. I am not having this problem with the other web browsers on my computer.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/908837]]</blockquote>
I think it is related to a babylon add on that my son installed. I don't know how to get rid of it.

Hi,
To check if Babylon is the cause: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Extensions''' on the left , '''Disable''' and restart. Likewise for other suspected add-ons. You can disable / enable more than one or all.
You may also want to check [https://support.mozilla.org/en-US/kb/No%20sound%20in%20Firefox?s=windows+7+sound&r=0&as=s this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Having a problem with the sound for purchased movies is skipping like a scratched CD

Every time I got to play a movie of Television show the sound keeps skipping like a scratched CD. I've tried redownloading but that doesn't seem to work. I dont know what else to do.

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

HT201699 I'm using an iPhone 4 which i purchased last month, there seems to be some kind of problem with the mobile data network

Hi,
I bought a new iPhone 4 last month, totally fell in love with it untill there was this problem regarding the apn disappearing. I manually added the apn info and it worked fine for some time but soon after I disabled the mobile data/3g connection and enabled it later I always use to get a msg saying "Could not activate mobile data network" even after it being active( 3g symbol always used to be poped up at the top). Though the apn is filled with a valid data it shows me the same msg over and over again. It some times works on rebooting but the rebooting the handset everytime i want to use the connection sounds very pestering. Please suggest me with somehting to get rid of this problem...

https://discussions.apple.com/message/21946322#21946322

I just purchased a used wireless Mighty Mouse. Do I need to have Blue Tooth installed on my machine to use it?

Hey
So I just purchased a used wireless Mighty Mouse at a Goodwill very inexpensively on the 50/50 chance it would work. Right out of the gate I figured I might need to have Blue Tooth installed on my machine to use it, is this the case?
I have a Mac Pro Tower running 10.6.7, but I didn't opt for the Blue Tooth a few years ago when I purchased it. I knew I should've!
Thanks.

Well I purchased the Mac Pro in 2009 I believe. It could've been late 2008, but I can't quite remember. When I ordered it from the Apple store online I customized it. I had the amount of Ram I wanted put into it, and had two hard drives installed. While doing all of my customizations I could've opted to have the Blue Tooth card installed into the computer but for some reason I didn't see myself using it. I did get the generic wired mouse that came with the computer.

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am not a knowledgeable user - have what may be a stupid question! I just purchased a TV show series on iTunes and downloaded all episodes for the season. But I believe i want them on my iCloud instead of my laptop. How do I transfer them or dupl

I am not a knowledgeable user - have what may be a stupid question! I just purchased a TV show series on iTunes and downloaded all episodes for the season. But I believe i want them on my iCloud instead of my laptop. How do I transfer them to the Cloud or duplicate on the iCloud?

You can't transfer any purchase to the cloud yourself, whether a TV programme/series will show in the cloud for redownloading in the future depends upon what country that you are in (TV programmes can't be redownloaded in all countries), whether you move countries (you can't redownload purchases made in another country) and if the rights-holder keeps them in the store (they occasionally remove their items).
As you bought it on your laptop then you could turn Settings > iTunes & App Store > Videos (under 'show all') 'on' on your iPad and it might show in the Videos app on it with a cloud icon against it for streaming/redownloading (it might also show in the Purchased tab in the iTunes Store app for refownloading whether or not you turn that 'on') - but that depends upon your country and only whilst it remains in your country's store. Similarly if you delete it from your laptop and tick the 'show iTunes in the cloud purchases' tick box on the Store tab in Edit > Preferences it might show in the TV Shows part of your library for redownloading (and whether or not you tick that it might show in the Purchased link under Quick Links on the right-hand side of the iTunes store homepage for redownloading).
But you should be taking a backup copy of it, and anything else that you download from the stores, there is no guarantee that you will be able to redownload any item.

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

Hi I just purchased a WVC54GCA wireless video camera I am having a problem with the setup software

Similar Messages

Maybe you are looking for