Hi i  m doing a normal bpm following walk trhough bpm error:no message type

hi
i have followed walk through bpm but when i cant receive the message at the other end after vanishing in the source directory
i get the erroe no message typr  found (BPE_ADAPTER)
when i went thru some of the blogs i came to know that i had to check sxi_cache
and if the return code is zero
but i dont find the integration process there to double click on it activate it

>> only find business process in my sxi)cache but not integration processes
Both are the same. I am using PI 7.0 and I find Integration process and not business process. Are you using XI 3,0?
>>how to check if all the cache notifications are green in ir and id
In IR and ID in th menu bar
Environment --> Cache notifications
Regards,
Jai Shankar

Similar Messages

  • Received unexpected message type does not match expected type

    1.Two Biztalk Applications A,B  one for sending the request(A) and other application will send the response to A.
    2.I have two schema  Request and Response in Aplication A which i have exposed as webservice.
    3. Application B share the same response schema .
    I am using WSBasicHTTP sysnchronous ports to send and receive the message.
    WHen Application B send the response , i get the error  "unexpected message type does not match expected type "
    but i dont know why i get such error when the schemas are share by both application. Please advice
    Regards
    Suresh

    Hi Suresh,
    Whenever you are doing request-response like calling web service etc, i would suggest to use Passthrough pipeline while sending and use XML receive for receiving the message.
    Because when you are sending the message out it doesn't needs any promoted properties so you can use Passthrough this will avoid extra Assembling/Validation etc tasks performed by XMLSend pipeline.
    But when you are receiving response that time it expects MessageType property to be promoted because normally you will have receive shape configured to some Typed Schema. So you will have to use XML Receive pipeline.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • How long does it normally take to download a 2.8gb film to a brand new ipod touch ?

    How long does it normally take to download a 2.8gb film to a new ipod touch ? - I'm using a wireless internet connection with a strong signal (speed 300mbps), but looks like it could take hours - that cant be right ?.  So far just 700mb have been downloaded in over an hour and a half.

    3 hours more.

  • Does the iPhone have the option of having a standard telephone type keyboard instead of the normal comp type

    Does the iPhone have the option of having a standard telephone type keyboard instead of the normal comp type

    phone icon/keyboard (at the bottom of the page )

  • What does a business event follow up do?

    HI all,
    Plz answer
    What does a business event follow up do? in case of Benefits
    Thanks,
    Rashmi

    Hi!
    it is the process where we transfer the data permanently into SAP system. few more things things happens like the attendence is maintained, historical data is created, the test result if any is transferred...
    rgds

  • How long does it normally take to convert from PDF to Excel files?

    How long does it normally take to convert from a PDF to Excel files?

    Sara-
    I did see your response.  Thanks.  The other thing that happened was after I enabled Adobe on my Dell it apparently knocked out my Mozilla.  Now I can't get internet connection unless I use Internet Explorer which I would prefer not to.  I'm going to visit our IT folks tomorrow and see if I can get some of this resolved.
    The PDF files I obtained that I am trying to transfer to Excel may be too complex because there is a great deal of extraneous text information in the basic document that lies outside of the tables I want to transfer.  I'm going to try and highlight the tables only and see if this works.
    Thanks for taking the time answering.
    Best,
    Henry

  • How long does it normally take to restore an iPod touch 5 iOS7?

    how long does it normally take to restore an iPod touch 5 iOS7? i have to restore it because recently, it shut down with 50% battery. and now its been taking too long to restore. Please advice regarding this matter. Thanks.

    Disconnect from your computer and iTunes and try again.
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Why+does+firefox+open+the+following+tab+file%3A%2F%2F%2FC%3A%2FUsers%2FTom%2FAppData%2FLocal%2FTemp%2Frpc.html

    why+does+firefox+open+the+following+tab+file%3A%2F%2F%2FC%3A%2FUsers%2FTom%2FAppData%2FLocal%2FTemp%2Frpc.html

    Just delete that file in the temp folder and cleanup that folder.
    *file:///C:/Users/Tom/AppData/Local/Temp/rpc.html
    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

  • Does Thunderbird normally take screen captures ?

    I run Trusteer Rapport on Firefox. It provides a weekly report of security-related events. I attach a screen capture. The report says that it has blocked Thunderbird.exe from taking screen captures while I was on a banking website in firefox.
    The screen capture happened at about the same time that Thunderbird stopped receiving emails from all my email providers and seems also to have lost all my email server passwords. ( I have already posted a question relating to this failure on Mozilla Support)
    Does Thunderbird normally take screen captures?

    I have never known it to do so and I can't think of any reason why it should. I use screen captures quite often to illustrate an explanation, and I can't recall ever seeing stray screenshots. (But then if it was covert, it wouldn't place them on the clipboard, would it? ;-) )
    I suspect you have a false positive there. I haven't used Rapport. My bank offers it but I don't expect such things to work in Linux.

  • How long does it normally take for all of your music to load on the new computer when you are home sharing?

    I am trying to load my music on my sisters computer. How long does it normally take for the first time to download? Her computer has been "Checking for new purchases," for about an hour now.

    10 hours does not seem right at all. Should take several minutes at best. The entire OS installation is under an hour. Post your issue in the FCS forum area here:
    http://discussions.apple.com/category.jspa?categoryID=123

  • Does NetWeaver / XI suitable for a generic BPM package?

    Dears,
    We are focus on deliver BPM solution and service.  We are very interested in NetWeaver XI/BPM.  But would like to confirm the NetWeaver function is suitable for a generic BPM solution.  We are convinced that XI can do EAI/process integration very well, especially integrated to SAP.  But further more, We want to know if the XI can play a workflow role as well as Ultimus workflow.  For instance, organization management, security management, multi-level approval process, send alert/message/mail, workflow monitoring.
    Any comment would be very appreciated.

    No, at the moment it is possible to have an organization managment and approval process is not possible with BPM. However, the BPM process can be integrated with the SAP/non-SAP workflows in the application systems to enable the organization management and approval process.
    Sending of alerts/messages/mails and monitoring is suppoted by BPM.
    During configuration time a workflow template is generated for each BPM process develped in XI. So all the monitoring avaliable for workflow can be used to monitor the BPM process
    I am not sure of what do you mean by security management in BPM?
    -Sreekanrh

  • When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48"  What does this mean?

    When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized.  Can't create record file, Please Report"  I press O.K. and this pops up - "Error occurred Result= -48".  Can't figure out why.  First time I have every had problems>  What's up with this?

    a -48 error is a duplicate filename.
    the first things i'd try are the oddball problems fixes:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to reimport a changed Interface / Message Type to NW BPM

    Hi,
    I m developing a NW BPM process (NWDS SP 09) to be used with SAP PO 7.31.
    The process is using 15 different imported Interfaces, all of them depending on an External Definition, which unfortunately need to be changed. In PI so far no pretty easy, adapting some mappings, no problem.
    But how can i update the process?
    Just importing an existing Interface again leads to error message:
    Could not import WSDL document:
    Could not import WSDL document:
    Cannot change XsdSimpleTypeDefinitionWrapper {http://www.namespaceDef.com}
    LocationIdent by importing the document http://www.namespaceDef.com/::src/wsdl/SI_OUT_ASYNC_Interface01.wsdl,
    because it is already defined in the document  in this project.
    Importing into another project might be possible
    SI_OUT_ASYNC_Interface01.wsdl
    /LocalDevelopment~bpm_product~pr~pm~company.com/src/wsdl
    Unknown Document Import Marker
    Unknown Document Import Marker
    Is it possible. that i have to start from the scratch?
    /Udo

    Hi Moritz,
    did i solve it?
    No, not properly. I'm going to handle it...
    Reimport of a changed own created Message Type works. Reimport of External Definitions does not work. Not nice - during a project it is very common that someone wants to have  the data structure changed. And then you have a little problem. How can you recommend a tool what is not able to handle such simple change requests?
    So what i did: I created a kind of a "neutral" message type, only used in BPM. I guessed which fields might become important in the future inside BPM for conditions and added 3 "flexible" fields. Plus one field, where i serialized the whole message (using the CDATA expression). Inside BPM i can react on requirements having the values of my fields accessable, but the message itself is serialized into one field value. If there is a requirement from the project to change the Message Type i just need to adapt my mapping from source to BPM. BPM to target is just deserializing and in a second step doing the normal mapping.
    The whole solution is a bit complex and self made, but working. Of course i cant start from the scratch for each change.
    /Udo

  • External definations Message type with bpm.

    Hi All,
    Can we use external def inside bpm?
    I have an external def and a Message interface from it - abstract synchronous,but its not been reflected while declaring a variable of type interface.
    This interface does not show in the interfaces list to select from while variable declaration.How can I do this?
    Please advise.
    thanks.

    Use the following steps in BPM
    1) Receive Step (Opens S/A Bridge)
    Properties:
    Name: Receive1
    Message: Request_var
    Start Process: yes
    Mode: Opens S/A Bridge
    Sync Inf: Sync_AI (Abstract Sync interface)
    Sync_AI:
    Output msg is Request_MT
    Input msg is Response_MT
    Request_var is interface variable referring to Request_msg_AI an abstract async
    Request_msg_AI:
    msg type is Request_MT
    2) Send Step (synchronous)
    Properties:
    Name: Send1
    Mode: Synchronous
    Synchronous interface: Sync_AI
    Request Message: Request_var
    Response Message: Response_var
    Receiver from: Send Context
    Sync_AI:
    Output msg is Request_MT
    Input msg is Response_MT
    Response_var is interface variable referring to Response_msg_AI an abstract async inf.
    Response_msg_AI:
    msg type is Response_MT
    3) Send Step (Closes Bridge)
    Properties:
    Name: Send2
    Mode: Closes S/A Bridge
    Message: Response_var
    Opened by:Receive1

  • Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

    Dear All,
    I am working on BPM 11g.
    I installed the following products for BPM 11g
    OS: Windows 7 SP1 Professional Edition all with 32 bit
    Installed s/w:
        JDeveloper 11.1.1.6.0 Generic Version
        OracleXE 11.2 Win32
        ofm soa generic 11.1.1.6.0
        wls 10.3.5
        RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds  - Utility run successfully.
    Overall Installation is successful wth no issues.
    Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
    I am using browser as Internet Explorer 9
    In Jdeveloper 11.1.1.6.0 after creating application, project and process
    From BPM MDS Navigator I configured the connection for Database 11g XE as well using
    Override Application Server user/password
    For SOA MDS I included the dev_mds user with MDS partition as obpm
    tested connections all ok (weblogic and soa_server1 up and running)
    In Jdeveloper I am able to export the BPM successfully.
    In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
    option as  Save to BPM MDS the following error is occured as
    "Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
    If the error is resolved than I can see the project in BPM composer.
    My queries on this error are
    1) Has soa_server anything to do with this error
    2) Is dev_mds schema to be reviewed
    what can be the possibility to resolve the BPM-70801 error.
    Please provide the solution ASAP or send me the reply to my  [email protected]
    Regards
    Ajaz Ahmed

    Hello Ajaz,
    BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
    Regards
    km

Maybe you are looking for