Hi I'm from Canada and baught a 20$ iTunes card from Australia here and I'm trying to redeem the 20$ of music I want to get from it, but it won't let me redeem it. What should I do?

Hi I'm from Canada and I baught a 20$ iTunes card from Australia here, and it won't let me redeem the money from it. I've tried to redeem it over and over again but it just won't let me. What should I do?

You can only use the cards in the store for the country they're intended for.

Similar Messages

I want to get a refund, but it won't let me

I couldn't refund because 90 days were over. No I cant get my money back. Plz Help

Refunds from the App Store or iTunes Store
(Note that I am affiliated with this site, it contains a donate button, and some pages contain ads).

When I try to email photos from iPhoto I get this message: The email server didn't recognize your username/password combination. It won't let me change it, what do I do?

When I try to email photos from iPhoto I get this message: The email server didn’t recognize your username/password combination. It won't let me change it, what do I do?

Can you send email ok via the Apple Mail application?
The username and password are set in the Accounts section of the Mail application. Start Mail, select preferences and select Accounts. Then make absolutely sure that the username, password and outgoing mail server are entered correctly.

TS3367 my FaceTime won't let me log in, what should i do? it says i have network problems but everything else to do with internet is working!

my FaceTime won't let me log in, what should i do? it says i have network problems but everything else to do with internet is working!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

HT4623 my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update.

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob

Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

I deleted People app and want to download it again, but it won't let me. It says it's already downloaded. What do I do?

I deleted the People app and want to download it again. It won't let me..says it's already downloaded. What do I do?

Open itunes, go to purchased and find the app and get it again.

I want to delete a Parameter but it won't let me...

I want to delete the parameter @Subtitle but it won't let me.
It has a green check mark beside it and in the Report definition it has the following.
How do I find where this is and delete it?
CR 8.5 dev edition
Kelvin
+++++++++++++++++++++++++++++++++++++++++++++++++++
4.0 Formulas
4.1 Record Selection Formula
     {CIT_RPT_VHINV;1.Condition} = {?@Condition}
4.2 Group Selection Formula
4.3 Other Formulas
     Name: {@Subtitle}
     Formula: //if {?@Summary} = 0 then "Details" else "Summary";
     Name: {@ConditionLabel}
     Formula: if {?@Condition} = 310 then "New"
     Else if {?@Condition} = 311 then "Used"
     Else "All"

It sounds like this parameter used to be in a stored procedure. I see you removed the reference to it in your procedure which is good. I think to make it disappear you could reset the data connection to a brand new one. If you are using ODBC give the DSN a different name. If you are using a native driver use a different driver like OLE DB or ODBC. Then reset the connection back to the original data source in the report. I think this will force the report to recognize it needs to update the connection information.
If the problem still exists, I recommend creating a copy of this report and removing half the items. If you get the parameter still, remove half of the remaining items. Keep doing this till the parameter goes away. Once the parameter is gone undo the changes until you find the item that is causing this.
I think you're best bet is to start with resetting the data connection and running it first before setting it back to the original.

WRT120N Have Password to protect from others, but it won't let my itouch join when I enter password.

Hi, my mother just bought me Wireless N Home Router. I set it up and it's working great. Problem is however, it won't let my itouch feed off the wireless connection. I enter the password in to join the group but it's keeps saying I am unable to join. I am 100% sure that the password is correct. So I don't know what the problem could be. Before I put in a password it was giving my itouch wi-fi w/o inserting a password. Once the password was needed the connection was lost and I couldn't get back in. Is there something that I can do? Can I turn the password off? I'm at a loss here lol So if anyone has any suggestions, I would greatly appreciate it.

Which security type you are using on the router...?
Open the router setup page by typing 192.168.1.1 in the address on wired computer..Under the Wireless tab,Change the Channel to 20MHz only and Standard Channel to 11-2.462GHz and click on save settings...Unde the Wireless Securiy subtab...Check the security key...If you are using WEP then,yse Key1 as the security key.
Under Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Power cycle the router and check..It should work !!!

TS1398 I have a wifi connection but it won't allow me to join. what should i do?

I have a wifi connection but it won't allow me to join. it happens when i upgraded my iphone to 5.1.1. What should i do now? can anyone help me please. thanks

Turn your router completely off (unplug it) for a few seconds, then turn it back on again and see if you can connect.

HT1212 My daughter forgot her passcode so we reset it as per your instructions above. The problem is that she can't redownload any apps. It is telling us that she needs 4.3 and we have 4.2.1 . We had all kinds of apps on it before but it won't let us redo

Please help. My daughter forgot her passcode and her apple id so we reset the ipod as per instructed I got her a new apple id. and now she can not redownload any of her apps. It says that she needs a 4.3 and she only has a 4.2.1. We are trying to download the same apps she had before and it won't allow it. I can not seem to get the 4.3. We are unable to download anything. Any help would be appreciated.
I was told it was a 3rd generation at purchase but when checking online it sometimes shows 3 and sometimes 2. I am totally confused and just want her to be able to use the device. Thanks and Blessings.

If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

On RC Plane 2 I want to buy a plane but it won't let me buy it

The game RC Plane 2 I want to buy this plane but the app tells me to go on apple support website. So I did and I have filed many complains about this situation. I need someone to see what is the problem here as soon as possible.

This is a user to user forum. We cannot help you with this. You need to go through iTunes support.
See here: http://www.apple.com/support/itunes/contact/

I forgot my passcode for my iPad and I want to back it up but it won't let me since its not unlocked. What could I do?

I dont know what else to do. Help

Too late to backup.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Mistakenly added feed burner, don't have a blog and it keeps asking me to set my feed. How do i get this to stop it won't let me do anything else.

I mistakenly added feed burner. I thought i was setting up to add blogs etc. that i was already subscribed to. Now it keeps asking me to "set your feed" and because of the drop down window asking for this it will let me do nothing else. I had to ask for this help in safari because firefox will do nothing now.

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. (You have to open Firefox) Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

Downloaded CS3 premium from web but it won't let me Setup

I Downloaded CS3 Permium from the webpage I was provided with on here to my new MAC because I lost my install disc. I am now trying to open Setup to follow those directions but it tries to initialize and gives me an error message and to contact Support....who then tell me all they can do is sell me the newest version. First, what am I not doing for the error message to come up? Also, it IS true I can download this trial web version and put in my serial number to get it to be permanent right? Sorry for the lame confusing questions...I have a 4 month old and am not all there now-a-days!

copy and paste the error message or attach a screenshot of it.
and which link did you use to download cs3 premium?

Hi I'm from Canada and baught a 20$ iTunes card from Australia here and I'm trying to redeem the 20$ of music I want to get from it, but it won't let me redeem it. What should I do?

Similar Messages

Maybe you are looking for