Hi, I'm having a problem with my first gen. iPad switching back to the apps page by itself. This started after upgrading to ios5. It will do this from safari or kindle. I have turned it off manually as suggested by a tech rep. without any improvement.

Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Similar Messages

HT1222 Having a problem with iMessage on my iPad mini.

Bought my Ipad from the US & presently using it in Nigeria.I'm having a problem with iMessage on my iPad mini, I've been trying to activate it and I've been receiving an error message saying my password is incorrect which I'm pretty sure isn't because I still buy apps on the iTunes Store with it. What can I do?

Have you looked at some of the 3rd party apps that will do this for you? Some of them are iPodAgent for Windows, copypod, yamipod. Most of them can be found on versiontracker.com, if not try to "google" them. Also, if you have purchased music, you can now import that off your iPod to your new system. Hope this helps.

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab. Everything else seems to work okay in itunes. I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.

You would get better response from the iTunes community forum.
Have a nice day!

Hello. i have a problem with my macbook pro, it happened last night. my computer was so logged in starting up,I decided to shut it down. this morning, when I opened my laptop,it was still so slow, moreover;I cant open folders,itunes.,system ref. help!

Hello. i have a problem with my macbook pro, it happened last night. my computer was so logged in starting up,I decided to shut it down. this morning, when I opened my laptop,it was still so slow, moreover;I cant open folders,itunes.,system ref. help!

What backups do you have?

After upgrading to iTunes 11.0.1.12 from iTunes 10, my playlists have disappeared.

After upgrading to iTunes 11.0.1.12 from iTunes 10, my playlists have disappeared. Any ideas how I can get them back? They are still on my iPhone though, even after a sync.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
tt2

MORNING HAVING A PROBLEM WITH MY Z10 WHEN I SWITCH ON IT SHOWS THE LOADING LOGO AND NEVER COMPLETES .YOUR HELP WOULD BE APPRECIATED THANKS

MORNING HAVING A PROBLEM WITH MY Z10 WHEN SWITCH ON IT SHOWS THE LOADING LOGO AND NEVER COMPLETES THE LOADING PROCESS.YOUR HELP WOULD BE APPRECIATED

Checkout this thread: http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-stuck-on-loading-logo-on-starting-up/td-p/2517909

Having a problem with mini dvi to hdmi. Can see the background, but must move all screens all the way to the right to see on tv. Any solutions?

I'm having an issue with setting up mini dvi to hdmi. I can connect and see the background picture from my macbook (approx 4 years old) but in order to see any screens or video, I have to move the screen almost all the way off the macbook display to the right. Any ideas why this would happen? Also, there is no audio, although when I bought the adapter and cable at the Mac store, they assured me it would handle both.

You have the display set in Extended Desktop mode. In System Preferences>Displays on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will makethe second monitor your main screen. You can now use your MacBook in ClamshellMode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
No Mini-DVI adapter can carry audio. The only MacBook that sends audio is the Mid 2010 model 7,1 through a Mini DisplayPort.
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

I have iPad2 and original iPad. After upgrade to iOS5 neither will connect to wifi network. Network is working as I have connectivity with iPhone and Mac Airbook. What's the problem?

I have downloaded iOS 5 to both iPad 2 and original iPad. I cannot get wifi to work on either. It's not my wifi as I have connectivity with other devices, just not with the iPad. Any ideas?

I'm having the same problem. The iPad has never roamed particularly well between access points, but under IOS6 it doesn't seem to roam at all, it simply sticks with the access point it first connected with.
I don't have a solution for you, unfortunately.

I'm having a problem with iBooks. When I want to browse the books by a certain author, then tap on that author, nothing happens. No books appear. This just recently became a problem. Would appreciate help.

I am having trouble with my iBooks app. When I tap an authors name in order to browse the available books, nothing happens. this problem has just recently occurred. It doesn't matter if I am looking at paid or free. Any suggestions ?

TheArtificialNerd wrote:
I can say 100% that the AppleCare phone number only redirects to other AppleCare groups.
ALL of them Apple corporate or Apple Authorized partners.

Having a problem with PEAP and Cisco 2960 Switch

Hi All,
    I am attempting to use PEAP with a LDAP backend on FreeRadius witht he MS Supplicant. I have it all working, in debug on the Radius server I see it sending all the information, the tunnel, medium etc. but with PEAP the Cisco switch is not changing VLANS. If I install the Cisco or Juniper client it works just fine if I use eap-mschapv2 but peap-mschapv2 does not switch the port to the right vlan. Is there something extra on the switch I need to do to allows PEAP or is there something on the FreeRadius?
    The only difference between the PEAP and EAP versions that I can tell is that the PEAP authenticates ands the information is sent once(according to the debug on the Radius server) where as with the EAP the connection information is sent several times, that is I will see the Tunnell and medium info sent more then once in the Radius log for just one login.
Any ideas?

Thought I mentioned the client in the first post, I am using the 3 different types of clients with a goal of getting the MS client to work. I am using the Juniper Odyssey client, Cisco CSSC client and the MS built-in client. I mentioned the EAP-MSChanpV2 because I tested that login so I could compare the Radius output with that of PEAP-MSChapV2. I did not release logs from the Radius server because it seems to be centered with something on the switch changing Vlans but if you want output I can give that..
CSSC Client pops out:
14:25:08.453 Network Connection requested from user context.
14:25:08.468 Connection authentication started using the logged in user's credentials.
14:25:08.468 Port state transition to AC_PORT_STATE_CONNECTING(AC_PORT_STATUS_STARTED)
14:25:08.796 Port state transition to AC_PORT_STATE_UNAUTHENTICATED(AC_PORT_STATUS_8021x_FORCED_UNAUTH)
14:25:09.828   Port state transition to AC_PORT_STATE_AUTHENTICATING(AC_PORT_STATUS_8021x_ACQUIRED)
14:25:09.843   Identity has been requested from the network.
14:25:09.875 Identity has been sent to the network.
14:25:09.890 Authentication started using method type EAP-PEAP, level 0
14:25:09.890 The server has requested using authentication type: EAP-PEAP
14:25:09.890 The client has requested using authentication type: EAP-PEAP
14:25:09.968 Profile does not require server validation.
14:25:10.031 Identity has been requested from the network.
14:25:10.031 Identity has been sent to the network.
14:25:10.046 Authentication started using method type EAP-MSCHAP-V2, level 1
14:25:10.046 The server has requested using authentication type: EAP-MSCHAP-V2
14:25:10.046 The client has requested using authentication type: EAP-MSCHAP-V2
14:25:10.078 Port state transition to AC_PORT_STATE_AUTHENTICATED(AC_PORT_STATUS_EAP_SUCCESS)
14:25:10.078 The authentication process has succeeded.
*************************Raidus Ouptut for PEAP:**************************
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for anonymous
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: object not found or got ambiguous search result
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
Waking up in 0.7 seconds.
Waking up in 3.7 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
**************************Radius ouput for EAP******************************
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
Waking up in 3.9 seconds.
Ready to process requests.
Hope that Helps.

My iPad screen keep flicking from page to page. I have turned it off and on again but it keeps flicking. Any suggestions?

My iPad screen keeps flicking from page top page. Any suggestions?

Give this a Try:
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Having some problems with Itunes Radio on Ipad with Retine please help!

Help! Itunes radio not working!

Try here > Can't connect to the iTunes Store
and here > iTunes for Windows: Network Connectivity Tests

After having a problem, and solving it by restarting on Safe Mode, the app names are not visible and are changed to "AAAAA" symbols

now they are like the this:, what can I do?

What was the problem?
After you booted into safe mode then what?
Have you rebooted?

Why when I ge, I would have come, but I ran near home since the group run was cancAwe, I would have come, but I ran near home since the group run was cancelled.elled. to a site my iPad jump back to the home page

MY iPad jump back to the home page every time I'm on a site

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Having trouble Installing io6 on first gen iPad

Can I install io6 on first gen iPad

This is a user-to-user technical support forum. You're not addressing Apple here. Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Hi, I'm having a problem with my first gen. iPad switching back to the apps page by itself. This started after upgrading to ios5. It will do this from safari or kindle. I have turned it off manually as suggested by a tech rep. without any improvement.

Similar Messages

Maybe you are looking for