"Hi,I'm having problems controlling the Agilent E4422B Signal Generator with Labview. When using the Labview driver functions such as initialize instrument I always get an Error -1074135040.
I can query the device through the measurement and automation tool. I can also Identify the instrument by issuing a *IDN? with VISA write and read. Why do I get this error while using the drivers supplied by NI for this equipment? Any Ideas?
Hi, Brooks.
Attached please find the files containing all the information concerning my attempt to control the Agilent E4438C. Hope you can make sense of it and help me.
Regards
isaac
Attachments:
nireport.txt 2 KB
Capture.spy 5 KB
CaptureSpy.doc 117 KB
Similar Messages
-
When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!
Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel -
Error generating RFC connections when using the wizard in SMSY
We are using the wizard in smsy to generate the rfc destinations but the error
Error create rfc destination back and also no read destination assigned for read access.
The user has s_rfcacl assigned on both sattelite and solman system and
we have tried deleting and recreating (by rerunning the wizard) rfc
destinations. We have also tried to manually create the rfc
destination. Any help appreciated.Hi,
The problem still outstanding is with rfc connection SM_<SID>CLNT<CLIENT>_TRUSTED in the Solman system. The error message is [No authorization to log on as a trusted system (Trusted RC=1).]
The following roles/authorisations are allocated to the user
S_RFC
S_RFCACL
S_TABU_CLI
S_TABU_RFC
S_TABU_SHOW
S_TCODE
S_USER_GRP
and SAP_ALL.
I have regenerated the roles, etc. Deleted and recreated the trust, using wizard and manually still error. The connection from the sattelite system to the Solman works fine. Please assist further. -
In Adobe 6.5 I was able to use freeform motion path with distortion of the graphic to fly in the graphic can't see how to do that in Adobe cc premiere Pro CC I called up support and they said it's been transferred to after effects is that true?
PPro. 6.5 or the good old Premiere 6.5 The Premiere 6.5 simple motion has been updated in the programs monitor and has more options and styles now. You can also use the Effects control and use keyframes. One can also use various effects like perspective and more. It is all about your creativity. So the 6.5 motion is in the programs monitor.
Double click on the video in the program window and you will see the handles. I prefer playing with figures in the motion control window with the x, y, z axis. One can even do 3d motion in that window -
Can the Flash Player do frame accurate seeking when using the HDS protocol?
Hi all,
... and thanks in advance for taking the time to respond. I've been playing with different media serving protocols, and I have a couple of questions.
1. Can the Flash Player do frame accurate seeking when media is served via the HDS protocol? (I know it works using RTMP)
2. If it does work, is it impacted in any way if I also use Access DRM-Core or Access DRM-Professional? (I want stronger DRM protection than simple Access Protected Streaming)
Thanks!Hello Simona_83. Try downloading Google Chrome (it's free). Install Flash Player via Chrome, and use Chrome as your browser. This is the only thing that worked for me after over a month of trying everything under the sun to get Flash Player working again. You'll have to use Chrome as your browser in order to have Flash Player capability, but so what. It works. If it works for you as it works for me, you will have Youtube again; you just have to access Youtube via Chrome. Don't waste hours of your life trying to get Flash Player to work any other way. Believe me, I wasted hours upon hours off and on over the course of a month trying to get Flash Player installed and operating.
-
How can I control the FAQ title with CSS when using the Ajax effect
I am calling the FAQ module with the Ajax effect.
I would like to set different states with CSS to the title;
I have tried to use :hover, :active and :focus on the div.
It would be nice with a different styling when the item is "open"
(I know there is a problem with the stacking, but I posted that in another thread)
linkHi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W -
I have a Macbook Pro 13'' 2011 OS X 10.9.4, and recently it started giving this problem, which the macbook works well while connected to the charger, but when i use it only with the batery it gets really slow. But in the report system of the macbook says that the battery is operating normally. It has alreary 822 cycles.
Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no meaningful change, open System Information>Power and post the following from your MBP:
(Make certain that the charger is connected)
Ciao. -
My 3gs locks up especially when using the camera
Has anyone had trouble with the iPhone 3gs locking up? Particularly when using the camera.
Probably a few people have had this issue. But that's irrlevant. What you need to do is perform a restore.
-
Having problems converting pdf to word. I'm not able to convert the file, what do I need to do?
having problems converting pdf to word. I'm not able to convert the file, what do I need to do?
Hi prates77,
I'm sorry to hear that you're having trouble converting files. Are you receiving the conversion error regardless of the file that you try to convert? Does the error occur whether you use the web interface, or convert via Reader? And an odd question: how many files do you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the root folder of your Acrobat.com account.
I look forward to hearing back from you.
Best,
Sara -
Having problems with using shift alt command when using the square tool
having problems with using shift alt command when using the square tool
Marco,
If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.
Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.
-
When I take my cd to meijer to print the pic are a little grainy. Not as crisp as they look on the computer. When I convert raw to jpeg I am using 90 quality 300 resolution, no resizing no sharpening, srgb. Can someone please help me understand what setting to use for printing. I want to be able to out my pic ok on a cd and take them to get prints.
kann527 wrote:
I am new to this so I am not sure what the file size is since I'm not resizing it.
The question asked about exported image size (height and width) in pixels, not file size. Your operating system can tell you, or if you import the exported image into Lightroom, then Lightroom can tell you in the Metadata Panel, set the dropdown to EXIF.
I am printing a 5x7. I know I have tried to print with long edge set at 1024 and set to 300 ppi and had the same result with the grainy ness.
If the exported file has a long edge of 1024, then you did resize the image, there no other way to turn a RAW in to a JPG with long edge 1024. In any event, 1024 pixels is probably not large enough to fill 7 inches, that's really 1024/7=146 pixels per inch (rounded-off), and could be the cause of the "graininess" that you see, although I would use the word "pixelization" to describe what you see. So I'm not sure we are talking about the same thing, but let's go with it for now.
The solution depends on your answer to the original question, and probably depends on a clarification of how you got the image to 1024 on the long edge even though you claim you didn't resize it. -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?
Not having the problem, don't personally know anyone who is.
-
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
Maybe you are looking for
-
i recently upgraded iPhones and so did my mum so when i was setting them up i linked the icloud between the two and since then my phone will only keep her contacts even if i restore my phone back to my old phones settings. when i have restored to my
-
Error when installing iTunes 6.0.4
I have been trying to install version 6.0.4 of iTunes But every time I run it, it gives an error saying "some installation files are corrupted" and asked me to download a fresh copy, which I did. But the same error message appears again. Is there any
-
How to convert only part of a picture to black and white?
Hello. I just received PSE 8. I want to convert a photo of my daughter to b&w but I want to leave her eyes blue. Anyone know how I can do this? Thanks so much.
-
How compactible is lightroom with elements 5.0
-
How i add my 2nd iphone on itune
I had lost my iPhone 5s no 1st march 2014. Phone is offline since I lost it, so I could not track it using "find my iPhone" apps. Now I will by a new iPhone 4s, so I want to know how can I add my 2nd iPhone to existing account and to iTunes ? please