Hi, I'm running Mac OS X Lion 10.7.5 (11G63) on mac pro. can i update to Os X Mavericks? thanks

We don't know a thing about your hardware, so we really cannot answer. See below.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Similar Messages

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
I need to keep Snow Leopard so that I can run some old softward.

If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
CCC can clone Lion Recovery - great for moving or backup.

I am having a Mac Book Pro 2009. And Its currently running the OSX mountain Lion I need to know will i be able to ugrade it to OS mavericks.???

I am having a Mac Book Pro 2009. And Its currently running the OSX mountain Lion> I need to know will i be able to ugrade it to OS mavericks.???

No one knows for sure as yet. This is the information Apple has provided to date:
http://www.apple.com/osx/preview/
Anything else is a guess.

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

Any suggestions?
My mail is still not functioning and crashes everytime I open it or check archived messages.

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Mac Pro SMC Firmware Update 1.1 keeps repeating

Recently I had my MacPro motherboard replaced by an Authorized Repair Center, and for the most part, everything has been working great since. That said, as I've been performing my regular software updates, I've noticed that the "Mac Pro SMC Firmware Update 1.1" keeps appearing as new update. I've installed this update multiple times now (or it seemed as though I did), but it keeps appearing with each new update.
Is there some way I can complete the update? Is it possible that there is some serial number conflict between my old/new motherboard that is preventing this? Do I need to return my machine to the repair center?
Thanks for any help.

Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
Matt

Mac Pro can access other Macs but those same Macs cannot access the Mac Pro

Hello.
I have a highly annoying problem that goes as follows:
My (home) network consists of:
- 1 Mac Pro (e2008 - 10.5.6)
- 1 iMac (2008 - 10.5.6)
- 1 MacMini (2004 - 10.4.??)
- 1 MacBook Air (2008 - 10.5.6)
The internet connection is alive and well with no drops not that it truely matters here.
The setup is as follows:
- Linksys AM300 in half bridge mode connects to the
- Apple Airport Extreme Base station from which 1 cat6 cable runs to the
- Mac Pro
The other Macs connected to the Airport Extreme wirelessly.
The Mac Pro has its network settings setup correctly (in fact it used to work fine but then just stopped working) and I have also disabled all network settings, rebooted and reapplied the settings to no effect.
To clarify:
I (Mac Pro) can connect to all Macs in the network but all those macs can see me but not connect to me. Connecting via the Finder simply says "Connection Failed" and if I open the "Connect to server.." and enter the IP address of the Mac Pro it results in an error/failed connection also.
Any ideas to fix this would be highly appreciated.
PS: As of now, 19/03/2009, I have all software updates installed on all macs in the network.

Place the files you want to transfer on the Desktop
Click on the Finder or desktop to swtich to Finder, then Go > Computer, then double click on the boot drive, then on the Users folder.
Open the target User folder and inside is a Public folder > Drop Box, just drag and drop in there and the permissions change so that user can use the file.

Mac Pro SMC Firmware Update "An Unexpected Error Occurred (0)" HELP

Mac Pro SMC Firmware Update (Version 1.1) Size (970 KB)
"The SMC Firmware Update adjusts fan behavior in Mac Pro. The updater application will be installed in the /Applications/Utilities folder and will launch automatically. Please follow the instructions in the updater application to complete the process."
-----THIS IS WHAT HAPPEND TO ME----I try this morning to install and this is what I got:
" An unexpected error occurred (0).
Your firmware can not be Updated. "
"See www.apple.com/support for more information."

Are you booting from RAID? even though it warns that you can't be booting from RAID, some people still run the update.
Any problem with your system?
While it only says that you need to quit any and all open programs, sometimes it helps to reboot (and boot into Safe Mode) just to begin the process.
When there was an SMC Firmware update before (last fall) some people also had trouble.
We aren't mind readers, and to say it failed doesn't give those of us reading this (and non of us are Apple tech support) a lot to go on.
+Please follow the instructions in the updater application to complete the process.+
+To update the SMC firmware on your Mac Pro:+
+Your computer’s power cord must be connected and plugged into a working power source.+
+1. Quit all other open applications.+
+2. Click Restart in the Mac Pro SMC Firmware Update window and wait for your computer to restart.+
+The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.+
+Important: Do not interrupt the update.+
+Your computer restarts automatically when the update is completed and opens the Mac Pro SMC Firmware Update.+
+3. Click OK. The SMC firmware is now up-to-date.+
+If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.+
Note:
+This update requires a Macintosh formatted disk or partition. If you are starting up using a RAID (Redundant Array of Independent Disks) subsystem, you must attach a Macintosh formatted storage device to apply this update.+
*+Some USB and FireWire devices may prevent firmware updates from installing correctly.+*
*If you are having trouble installing an update try disconnecting non-essential devices and use only an Apple branded keyboard, mouse and monitor.+*
http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html

Mac Pro 2008 does not shut down with Mavericks

Hi, I've got a 2008 Mac Pro.
Recently I've upgraded to Mavericks and everything seems to work fine except for the fact that when I try to shut down the Mac it doesn't shut down but it automatically restart.
The only way I've found to shut it down is to put it in sleep mode and then keep the button pressed until it shuts down but I don't want to do this every time I have to shut it down!!!
Can you help me solve this please?
Is it a system bug?
Thank you very much
Diego

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!

> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

How do i share a file so another user of my mac pro can access

Hi
I have a file on my mac pro that I want others to use for presentations without them seeing all my private info. I have set up a new user but how do I share the file the other user on my mac pro can see it?

Place the files you want to transfer on the Desktop
Click on the Finder or desktop to swtich to Finder, then Go > Computer, then double click on the boot drive, then on the Users folder.
Open the target User folder and inside is a Public folder > Drop Box, just drag and drop in there and the permissions change so that user can use the file.

My mac Pro can't boot OS X, if it connected with iPod video

Hi All~ I have received the new Mac Pro, but I don't know why..... if
my iPod video(60G) had connected with USB ports of Mac Pro, then I can't
boot my OS system.... that seems the Mac Pro can't reach my hard
disk, because the apple log doesn't appear (nothing on the screen)
and everything is blocked, however when I put out the iPod, the Mac
would go into the system smoothly, I don't know why. there is no
problem with my powerbook or iMac G4 as the same situation to boot
the OS system. Is a new rule to start the system with Intel CPU?
Can anyone tell me what happen with my Mac Pro, does it have something wrong? Thanx
Reeeeegards,

Hi everybody!
I´ve a similar problem. However, in my case it´s not when I boot Mac OS X but when I boot into bootcamp with Windows XP. It takes a loooooooong time for the Mac to start the booting when my 80gig ipod is connected to the USB-port . Maybe you also have just to wait longer?
If I disconnect the ipod during this waiting period from the USB-port, the Mac starts booting immediatelly! Fortunatelly I´ve no problem when directly booting into Mac OS X.
Direct connection or connection via self-powered USB-hub, disk-mode or no disk-mode, ipod formated in Mac or Windows format, I tried everything, but it all made no difference. Any advice to solve the problem would be very wellcome.
By the way, I´ve another ipod connected via firewire, this is not causing any boot-trouble.

Mac Pro can't recognize 1GB Pen Drives... How to fix it?

Recently I keeps encountered the same annoying problem...
My Mac Pro can't recognize the USB pen drives when I or my co-worker plug into Mac Pro's USB port.
For a few times, if we are lucky, Mac Pro shows the pen drive on the desk top, but sometimes it can't read or write the data from/to the pen drive, many times, it simply freeze over.
Does anyone knows how to fix such problem? It seems to me that the new Mac Pro still has some bugs needs to be sort out...
Thanks in advance.
KC

Hi, Malcolm:
Thanks for the post.
No, my new Mac Pro system does not have USB port on the Keyboard, cause I've opted for Apple's wireless blue tooth mouse and keyboard.
I do have 2 USB ports on the Apple's 23" LCD display, and Two USB ports on front side and two available USB ports on the back of the Mac itself.
During the Thanksgiving long weekend, I think I might accidentally singled out the cause of my problem.
I have my HP printer and one multi-card reader constantly pluged into the two USB ports at the back of my Mac, and always tried to use the front side USB ports for the 1GB USB Pen Drives, and that's where the problem lays!
When I unplug the Multi Card Reader from the back USB port, and suddenly all USB ports on my Mac works just fine with the Pen Drives!!!
So, for now, I plug the Multi Card Reader in one the the front USB port, and the rest of the USB ports on the Mac work with Pen Drives flawlessly, it seems that I sloved my problem for the time being...
As for those two USB ports on the back of my 23" Apple Display, They can not take my USB Pen Drives, as you've mentioned that it does not have enough power for the USB Pen Drives.
K C
Mac Pro 2x3GHz Dual-Core Xeon, Power Mac G4 dual 1G MDD, 5G iPod 60G Mac OS X (10.4.8)

I have a new mac pro can, and was checking settings. I gave a user 'no access' who I didn't recognize, and loast all access to my computer.... Won't even reboot! Can anyone suggest anything?

I have a new mac pro 'can', and was checking settings. I gave a user who I didn't recognize 'no access', and lost all access to my computer immediately. Tried to change access back, but I was totally locked out (even as the admin). It won't even reboot! I thought it might have been back when I gave Adobe access (when they had their Cloud fiasco and my machine kept crashing with Premiere). Can anyone suggest anything?
MacPro 2013, 6-Core, 3.5 Ghz, 32 gigs of Ram, latestt update for Maverick
Thanks!

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
If you purchased it within 90 days yo have free telephone support from Apple
Complimentary Support (USA)
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hi, I'm running Mac OS X Lion 10.7.5 (11G63) on mac pro. can i update to Os X Mavericks? thanks

Similar Messages

Maybe you are looking for