Hi I'm trying to record audio

Is there any application in existence that can record audio from a website or audio that is currently playing in a program (ie Itunes). any help is appreciated. Thanks!!

The best I've found for ease of use is Wiretap Pro by Ambrosia.

Similar Messages

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • Trying to record audio (background sounds)

    Im having the darndest luck trying to do this but here goes.....
    I have a Audio Recording Software (DAW) that im trying to make a presentation on using the video capture, andeverything works just fine....but the recording is not capturing the audio from the program.
    I have checked out the audio recording settings, and it only shows "mic inputs" for devices. I dont want Captivate to record inputs, but i want it to record the audio (from the soundcards output) that the recording software is playing.
    Any ideas?

    Hi there
    Assuming that you find you are simply unable to coax Captivate into recording the audio, here is a workaround. Obtain a small patch cable that connects the Speaker out jack to the Microphone in jack. Then record accordingly.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Logic freezes when trying to record audio file

    I am using my Guitar RIg "Rig Kontrol" as an interface. I create a new audio track without opening with guitar rig. I prefer to add that on after to preserve processing power.
    The second I hit record, Logic freezes. Any ideas?

    Not sure what 'the numbers 1,2,and 3 next to my first three tracks flash with a box' means but it could be something to do with the solution if its the Mute or Solo buttons flashing.
    If you go into the Mixer you might find a track that's been soloed or muted that isn't on the arrange page. That's all I can think of from what you've said.

  • Xperia Z1 4.3 Appcrash when trying to record audio note

    Hi Folks,
    Xperia Z1, Android 4.3, 14.2.A.1.142, OneNote and Facebook App crash when i try to record an audio note.
    In OneNote recording starts, but when stopping, the app doesn't respond any more and crashes. Xperia Z1 has to be rebooted to use the microphone in any other app, otherwise i get a 'microphone not available' message.
    Same happens with facebook audio notes.
    4.2 worked flawlessly here. Repairinstall didn't help, problem stays.
    Seems to be a bug in 4.3 on Z1? Any workarounds?
    TIA;
    Matthias

    Jeroensky wrote:
    OneNote = Microsoft. So it doesn't work, what's new
    Remove it from your Android device, and use for example Tape A Talk for audio recording.(up to 44.1KHz 16bit wav recording, yes CD quality)
    well, um, that doesn't really solve the problem with facebook does it?
    I use onenote not only because of the audio feature, and it worked pretty good on the Z1 with Android 4.2, sync with web and desktop app.
    On Tablet Z with 4.3 and Xperia T with 4.3 both apps work without any problems. On Z1 with 4.2 they worked without problems. on 4.3, they don't.

  • Trying to record Stereo Mix with a monitor through my headphones.  Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

    Basically, what I am trying to do is this:
    Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio.  I have all that figured out.  I'm able to efficiently record my audio and screenplay through these instruments and programs.  What I am having trouble with is the stereo mix.  I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone.  I want there to be no external sound except me talking into my microphone.  I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
    Problems I have run into so far:
    -Haven't gotten it to pick up in game audio at all while using headphone.  Can't figure this out
         -Downloaded soundflower, have the output as soundflower.  Not picking up anything, will put all my sound and midi settings at the end.
    -When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
         -I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't      figure it out
    -Trying not to run 16 million programs while running the game, will cause lag.
    Summed up:
    Trying to record:
    -Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
    -Record voice through Avid MBox Mini and MXL 909 microphone.
    -Record screen gameplay through Screenium
    I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps.  That is done and these are my current settings:
    Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record.  Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
    Sound Settings - Output Stereo Mix (custom channel)  Input Avid MBox Mini (recording)
    I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it.  I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
    My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5  2.4 GHz Intel Core i7 4GB 13333 MGz DDR3  (If any of this is imporant)

    Hey guys,
    I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
    What software are you using to record your game?
    If anyone knows anything different, please let me know.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • In FCP.  Trying to record voiceover.  Go to Window, Record Audio, see the record window and FCP quits in about 2 seconds.

    Trying to record audio voiceover.  Go to Window, Select Record Audio, see the record window and FCP quits in about 2 seconds.  Can't get started??

    I think you've got the right driver selected, otherwise it wouln't work at all. The single most obvious thing to ask you though (I'm sorry if this is too basic) is where you have the pan controls set to? To get each mic to record on a single channel, you'd have to have one panned hard left and the other panned hard right. If you leave them both panned dead centre, that's exactly what you get - both mics on both channels.

  • Unable to record audio

    I am trying to record audio into Logic through a electro-acoustic guitar and AKG microphone, which are both plugged into my Saffire 6 interface. Everytime I set up a new audio track and select the 'R' record button, a loud static noise plays through my monitors. You can see that the interface is picking up a signal from the guitar but all you can hear is the static.
    When I increase the gain on the instrument channel on my interface, the noise stays at the same level. But when I increase the volume of the monitors or the volume of the mixer channel in Logic the noise gets louder. This makes me think that all the cables are fine but it is something to do with a setting in Logic.
    The mixer channel in logic always looks like this when audio recording is enabled:
    I've read on some other forums that it might be to do with the buffer size - I've tried changing this but the problem seems to persist. I also read that it might have something to do with setting the midi clocks in the synchronization tab but there wasn't enough information explaining how to do this.
    My midi setup currently looks like this:
    I've had this problem for ages now and can't find a way around it....

    Couple of more questions:
    Does the Focusrite have a feature called zero latency monitoring, also called direct monitoring? If so make sure it is turned off and not used. The Saffire has a "Mixer" knob, do you have that in the correct position. Do you have the latest drivers?  2.6 it looks like.
    http://www.focusrite.com/products/audio_interfaces/saffire_6_usb/downloads/
    Does the microphone channel work ok? Have you tried reversing them.
    What happens to that channel if the guitar is not plugged in, is there any noise?
    Are you using a standard 2-conductor guitar cable, or is it by chance a three conductor stereo cable? It should be just a standard guitar cable.
    It there anything else being used on the USB bus, are you plugged into a USB hub or directly into the Mac?
    Speaking of which, wht Mac and OS?

  • Recording audio from a MicroKorg

    Anyone?
    I have set up a tascam us-122, microKorg synthesizer/vocoder along with my speakers. Have not had any problems listening to audio, using midi etc. etc. Trying to record audio into LE8.0 from the Korg and am receiving an Error Mp2 code not found? Any ideas on what I could be doing wrong? I have not had any issues when recording into garage band or cubase with the Korg and am able to utilize LE8.0 fine other than this issue.

    Hi,
    it sounds a bit like a driver problem. I've heard that mp2 is often used as the "language" by which an audio/video interface and computer cummunicate. Have you updated to Leopard recently??
    I'd certainly check if the interface is still working in Garageband or Cubase.
    Regards,
    Jaap

  • Recording audio from a Channel Send

    I've done this before, but I can't seem to do it again.
    I am trying to record audio from one channel (which is using an audio instrument) to another channel (an audio channel) using an audio send. I am not having a problem setting up the send. I am able to hear the audio correctly and independently on both channels. The problem occurs when I try to record the audio, because there is no "record" button on the channel header for me to arm the track. The track is set up as a "record-enabled" track, but in the space where the other tracks have the record button, there is just a empty space on this tracks header. Does anyone know why this is happening? Any help would be greatly appreciated.
    Thanks.

    Well,
    I seem to have found the problem. It appears that "audio tracks" will not allow you to arm them for recording unless there is a possible real audio input device connected to the computer. I plugged in my Snoball mic, allowed Logic to set it up as a device, and the record button magically appeared in the track header.
    Hope this helps anyone else who is having a similar issue.

  • Problem with the preview of recorded audio

    Hi lads! I'm running Logic 8 in my iMac, with a RME Fireface400 interface (connected through a Lacie external firewire hard disk), and I have a small problem.....
    I'm trying to record audio using my audio interface. I can record audio into Logic with no problem, everthing works fine, but the recorded audio part just looks empty in Logic! It is really recorded, and it sounds, but it just look like an empty audio part.
    If i close the project and I re-open it, the audio is prevosialized and it looks fine.
    I know it is a small deal, but it can be very annoying! This thing happens since I bought the RME, but....it really looks like a Logic issue....
    Is there any option like "auto preview recorded audio" in Logic? Does anybody know how to solve this little issue?
    Thanks!

    So what you are saying is that no overwiew of the waveform has been drawn? And that it has been drawn when you reload the song?
    Open the region with the audio file in the *Sample Editor*, and choose *Refresh Overview(s)* from the *Audio File* menu in the Sample Editor.
    regards, Erik.

  • Trouble recording audio in Cubase SX with X-Fi Platinum

    Hi everyone,
    I'm trying to record audio in Cubase SX with my X-Fi Platinum. I have:
    - Selected Creative ASIO for the ASIO driver
    - Ensured that the VST inputs are set to the correct X-Fi input
    - Ensured that the VST outputs are set to the X-Fi Front Left and Right outputs
    - Switched on direct monitoring in the mixer, and I can hear the audio input before trying to record anything.
    - Enabled recording for the audio track in my project
    - There are no inserts, sends or EQ specified on the audio track - it's all clean.
    My problem is this: When I hit the master record, the recording bar on the audio track doesn't move. On the occasions where the recording bar does move (I'm not sure how I managed to get it moving), no sound is being recorded - even though I can hear via direct monitoring the sound that I am trying to record.
    The other symptom that I am getting is that the VU meter for the audio track in the mixer is not displaying or moving prior to recording or during recording - even though I can still hear the audio via the direct monitoring.
    I'm new to Cubase SX, and I'm probably missing something simple. Can anyone help me?
    Thanks!

    You brought up quite old thread so maybe no vista yet at that time.
    Sometimes, setting latency too low may prevent recording/playing ... or setting the monitoring
    false (there are hardware monitoring and software monitoring which maybe can't be used at once).
    SX has also a settings option named as "Lower Latency" which sometimes is best to leave disabled.
    jutapa
    Message Edited by jutapa on 02-16-200811:13 AM

  • Quicktime Freezes When Recording Audio

    Quicktime froze one time when trying to record audio, so I restarted my Mac. It still froze, so I tried repairing by using the uninstall program.
    It still froze, so I uninstalled it and re-downloaded it. It's still freezing. I'm starting to think it's something in my system files but I don't really know.
    The program freezes when I click the record button.
    I really need help because it's the only recording program that doesn't slightly slow down my audio, so I really need it.
    Any help would be appreciated.

    Please, I really need help.

  • Recording audio with Premiere Pro CS6

    I'm a new comer to Premiere, having come from Final Cut.  I am trying to record audio into Premiere via a USB audio interface and mic.  I am able to record, but I want to know how I can monitor while I'm recoding.  I've already tried disabling the "mute input during recording."
    Does anyone know how I can see my audio levels while recording?

    (first importing to internal HD via the Canon XF Utility)
    Try skipping any special software and just use Windows Explorer (or Finder).

Maybe you are looking for