Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
Rex's iPhone
The MAC Address, also known as a Wi-Fi Address is a unique indentifiction number that is assigned to every device. The number will always follow this form:
xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
On the Home screen.....
Tap Settings
Tap General
Tap About
Wi-Fi Address is the item that you want
If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
The Wi-Fi Address for the Mac is located at the bottom of the window
Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

Similar Messages

HT5656 This is all great but for me the "IPv6 Delegated Prefix" field never sticks. After the reboot to apply the settings, it is empty again. I have tried the 6.2 Airport Utility on OS X 10.8.2 and the iOS Airport Utility. Any ideas?

Hi All,
   I had a working IPv6 tunnel with my Airport Express to tunnelbroker.net using the 7.6.1 firmware. After updating to 7.6.3, I have tried many things to get it to work and the only one that works is downgrading from 7.6.3 back to 7.6.1. After seeing this new technical note, it appears that the root of my issue is that I can not get the "IPv6 Delegated Prefix" field to stick - it is always empty after the reboot to apply the settings.
   Any ideas?
     Thanks,
       CraigN

I'm in the same boat with a 3rd Gen AEBS. Only thing I haven't tried is a complete reset and reconfiguration from nothing, which I may wind up doing this afternoon just to rule it out. The best irony of all of this is that tunnelbroker.net is under my responsibility, and I can't validate the new settings paradigm. At least getting back to 7.6.1 is easy enough and everything works fine there.
IPv6 Delegated prefix doesn't get saved when using the format from their example, then a 6to4 address shows up as the local address on the main Internet page, and no RAs are received once the AEBS comes back from a reload. Something's a little off on this release.

How do I keep the keypad open when making a call? I may need to enter an extension and the screen is black.

After I make a call sometimes I need to enter an extension. When I receive certain calls I need to be able to hit a keypad number. The phone screen goes dark in both situations. How do I keep it lit?

It remains dark even when you move the phone away from your ear? Is the proximity sensor covered by a screen protector or case, perhaps?
Try hitting the menu button to see if that lights up the screen so you can enter extensions or respond to prompts.

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

Does Apple charge a dollar to reset the apple id password? What are these $1.00 charges from itunes for? No purchases of movie books music etc. found on itunes.

Does Apple charge a dollar to reset the apple id password? What are these $1.00 charges from itunes for? No purchases of movie books music etc. found on itunes.

Found the answer.

What are these processes and how do I prevent them?

For many years, many have complained of external drives that are in standby/sleep spinning up for no apparent reason. From the user's point of view this is unnecesssary, but to make matters worse, the system usually stops everything else while waiting for the drives.
I have a Mac mini that I use as a home theater pc. The media and backups are on a 5-bay enclosure (no RAID) attached by USB. While watching a video, the unused drives will go into standby mode, which is good. But then, with no user activity, they will spin up, freezing the video and everything else, which is not good. As these are slow drives and spin up sequentially, this can take 10-20 seconds. This may happen once or twice an hour, but sometimes more frequently.
In looking into the causes, I have turned off time Machine (after putting these drives into the Privacy section for good measure). I also prevented Spotlight and fsevents logging with the following:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
cd /Volumes/<drive1 and then repeat for other drives>
 rm -rf .fseventsd .Spotlight-*
 mkdir .fseventsd
 touch .fseventsd/no_log .metadata_never_index
As far as I can tell this has worked to stop those processes from accessing the drives after they are mounted, but the problem persists. To find out what else might be causing them to wake up:
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
and here is what I found last night (actually didn't use the -w last night, thus it is cut off):
18:35:36 fsgetpath /Volumes/XBMC 0.000026 SSDragHelper
18:35:36 fsgetpath /Volumes/Stuff 0.000006 SSDragHelper
18:35:36 fsgetpath /Volumes/DatOptic_3 0.000005 SSDragHelper
18:35:36 fsgetpath /Volumes/MacBackUp 0.000003 SSDragHelper
18:36:15 fsgetpath /Volumes/XBMC 0.000026 System Prefe
18:36:15 fsgetpath /Volumes/Stuff 0.000004 System Prefe
18:36:15 fsgetpath /Volumes/DatOptic_3 0.000003 System Prefe
18:36:15 fsgetpath /Volumes/MacBackUp 0.000003 System Prefe
18:55:36 fsgetpath /Volumes/XBMC 0.000034 GoogleSoftwa
18:55:36 fsgetpath /Volumes/Stuff 0.000004 GoogleSoftwa
18:55:36 fsgetpath /Volumes/DatOptic_3 0.000003 GoogleSoftwa
18:55:36 fsgetpath /Volumes/MacBackUp 0.000003 GoogleSoftwa
After looking into the Google process, I was surprised to find the tentacles that Google puts into your system, and ripped every bit of it out that I could. But I have no idea about what's going on with SSDragHelper and System Prefe (presumable System Preferences). This must be OS X itself? What are these processes doing, and is there any way to prevent them from accessing these disks in this way?

Thanks for the reply Hen3ry. Looks like you've done a lot of investigation. For me, fs_usage entries accompanying spindown are not problems - I'm happy if the drives spin down. My problem is the spinups. But still, I don't think it is necessary to time the fs_usage entries with spinups. If you grep for the drives you're concerned about, you will see any process that would potentially wake them up.
Because my understanding is limited, I also am more concerned with the process/application that is accessing the drives than with the functions or commands they are sending. And the values that are returned by those functions are way beyond what I can deal with.
It's interesting that you've found a difference between your old and new drives. Could you specify the enclosure and drives in each case?
The StorageStatus app looks interesting; thanks for the tip.
Here's a summary of what I've done so far, which I think is working. I need a few more weeks to know for sure.
How to prevent unwanted drive spin-ups
If you are actively using the computer that the enclosure is attached to, nothing on God’s green earth will stop OS X from waking them up after some user action, even ones that seem to have nothing to do with the external drives. But if you leave the computer alone while some application is running, like watching a movie or downloading a file, you have a fighting chance of coaxing OS X into leaving the uninvolved drives alone.
If the drives are shared with any other computers over a network, eject them on those computers
Otherwise, OS X (AppleFileServer) will poll them every 10 seconds. This might not be bad if you want to just keep the drives spinning and the other computer stays awake.
Third-party apps
Make sure no apps are running that might access your drives. Google runs some processes that do this (maybe I’m naïve, but I was so shocked I removed chrome and every other trace of Google from my Mac mini system). Another is iStat and any utility that monitors SMART status in the background.
Don’t let Spotlight index or search the drives
Spotlight is persistent, and it may be necessary to take a variety of steps to stop its various processes (mds, mdworker) from accessing the drives and waking them up. In other words, kill it, drive a stake through its heart, then burn the body:
In System Preferences > Spotlight, add the drives to the Privacy pane.
Add a file called .metadata_never_index to the root of each drive (note the leading period). The easiest way to do this is in Terminal
touch /Volumes/<drive1>/.metadata_never_index
Tell Spotlight AGAIN to keep away from the drive:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
Finally delete the Spotlight folder from the drive.
rm -rf /Volumes/<drive1>.Spotlight-*
Stop fseventsd from logging in the drive
This is easy, just putting a no_log file in its folder. I have found that rarely it still writes some files in there, but it doesn’t seem to do so when it causes problems, so . . .
 rm –rf /Volumes/<drive1>/.fseventsd/*
 touch /Volumes/<drive1>/.fseventsd/no_log
Finder sidebar
Some people say that if the drives show in the Sidebar of Finder windows, the Finder will be checking them. I’m not sure. But to be safe, in Finder Preferences > Sidebar, uncheck External Disks.
Just say no to Time Machine
On the home theater mac itself, regular backups shouldn’t be needed. You should be able to just turn Time Machine off. However, it is probably sufficient to simply open System Preferences > Time Machine > Options and add the drives to the list of locations to exclude from backup.
Second, local backups can be disabled with
sudo tmutil disablelocal
Look for other culprits
If the problem persists, use fs_usage, which generates a real-time log of filesystem activity. There is so much going on that you need to use grep to restrict the output to entries that involve your drives. The entries that accompany your drive spin-ups are the ones you really want.
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
Now leave the keyboard and mouse alone, as many things you might do will cause the drives to be accessed. You probably want to find what does it when you’re not actively interacting with the computer. It’s not really necessary to wait for your drives to sleep and see what wakes them. Any activity you see would probably wake the drives if they were asleep. When you see some activity and want to stop and examine, type Control-C to stop the output. On the far right of each entry is the process or application that accessed the disks.
I got pointers from http://system-log.tyr.org.uk/2012/01/31/how-to-stop-usb-drives-from-spinning-up- unnecessarily-on-os-x-lion/ and http://www.jackenhack.com/disk-that-refuses-to-sleep-in-mac-os-x-how-to-fix-it/

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
I do not have any VPN enabled?

Do you happen to have an Android? If so and depending on what version there is a great data usage analyse tool built-in. See if you can go to Settings -> Data Usage from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

What are these called?

Hi,
I am trying to figure out what this element is? Since I dont know what its actually called I have to provide a picture for my example.
What are these elements called? I have pointed to them in my image with the red arrows. Im pretty sure the horizontal ones are a "horizontal rule". But what about the vertical ones? And how does one implement them in a site? http://i52.photobucket.com/albums/g29/FartyMcFly/Example.jpg
Thanks for any answers in advance and I apologize if its something stupidly simple.
Thanks

How do I set the length of the border lines.
I'm afraid there is no support for that in current CSS2 standards.
You will be able to do it with CSS3 border-images. But not for a few more years.
http://www.css3.info/preview/border-image/
In the meantime, you could put your border on a neighboring division -- see example below:
http://alt-web.com/TEMPLATES/CSS-Basic-2-column-layout.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

What are these dots on my iPhone 5 SIM tray?

There are these odd white dots on my inside edge of the SIM tray in my iPhone 5. I don't recall seeing these dots in previous generations of iPhone 5.
I found a similar thread on MacRumors about this, but there appears to be no answer.
Here is a picture:
For my iphone, I have an extra dot (so three dots and a line), so it is not exactly the same.
What are these? Are these normal? Does your phone's SIM tray have those too? How many dots?

How do you know about this? How many "configurations" are there of these dots? This is the first time I had seen it in an iPhone (as compared to previous gens).

What are these blue box question marks?

What are these blue box question marks appearing on some websites?
They seem to not appear on every website I visit, only some.
I have tried several troubleshooting steps.
-I reset cache.
-I changed text encoding.
-I checked bos to always display images.
-I went to "develop" and opened in every other browser.
-I updated my adobe flash player.
What else can I do?
It is so annoying!
I am running Safari 8.0.
Thank you!

Here is a screenshot of the page:

What are these ports 989, 1021, 1033 and why are they always ON?

I have noticed unknown network traffic on Activity Monitor, even I close all application, AM still shows there's about 1~2 KB (Data received).
So, I open a Terminal and check by 'netstat' command. I notice there's some unknown tcp connections established. Is there anyone know what are these ports, and is it normal to have them ON all the time ?
$ netstat -n | grep EST
(..omited)
tcp4 0 0 127.0.0.1.1033 127.0.0.1.989 ESTABLISHED
tcp4 0 0 127.0.0.1.989 127.0.0.1.1033 ESTABLISHED
tcp4 0 0 127.0.0.1.1033 127.0.0.1.1021 ESTABLISHED
tcp4 0 0 127.0.0.1.1021 127.0.0.1.1033 ESTABLISHED

These ports are some of those used by the NetInfo subsystem which keeps track of your computer's users, groups, and some other information about its configuration. Since the IP addresses listed for those connections are all 127.0.0.1, your computer is connecting to itself; having these open isn't a cause for concern.
(16141)

What are these old files?

I am going through old folders and found several of the following:
Cache folder containing Timeline Movie Data.plist, Timeline Movie.mov
Media folder containing Clip 01.dv,
What are these files and can they ever be used to recreate some old project? Should I just delete?
Thanks.

Cache folder containing Timeline Movie Data.plist, Timeline Movie.mov
Media folder containing Clip 01.dv,
These look as though they are or were associated with iMovie HD 6.
The Media folder containing Clip01.dv will be original source material, which you say you do not want to delete.
This media will most likely have been imported from a DV tape camcorder ( or an analogue to digital converter).
Do you still have the old version of iMovie ? (iMovie HD 6, if I am correct).
If you no longer have the version of iMovie that generated your above files, but have a later version that you wish to use this .dv media in, then you may well be able to import it into the later version.
I would be curious to see if you can also import the "Timeline Movie .mov" into a later version of iMovie.
If the Timeline Movie.mov had still been within the iMovie HD 6 project then you can carry out this import into say iMovie versions 8 and 9 (iMovie 09 and 11) and most probably iMovie ver. 10 (iMovie 13).Try it anyway.

In pricingcondition table KOMG - what are these fields?

Hi Gurus
Please let me know what are these fields in KOMG and KOMP condition tables.
RKE_MVGR1
RKE_MVGR2
RKE_MVGR3
RKE_MVGR4
RKE_MVGR5
Thanks
Kris

Hi Sai
Yea I am sorry , I know these are Material group fileds, But what is RKE ? in front of the field?
Like that there are so meny fields in the table KOMG(pricing condition table) , So I am not able to use these fields while creating condition table?
How to solve this issue?
RKE_PAPH4
RKE_MVGR1
RKE_MVGR2
RKE_MVGR3
RKE_MVGR4
Thanks
Kris

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Similar Messages

Maybe you are looking for