Hi i need an example or a document to make an ASAP methodology
Hi all,
i m looking for an ASAP methodology, if you have one, i'll be really glad of starting mine, please send it to this direction: npi2004@hotmail , thanks guys !
Hi Jorge,
AcceleratedSAP (ASAP) Roadmaps provide you with proven, practical, comprehensive, repeatable, and rich implementation methodologies that enable speedy, focused implementation of SAP Solutions. ASAP Roadmaps cover the most important aspects and phases of a SAP solutions implementation, enhancements, or upgrade following the AcceleratedSAP (ASAP) principles.
The roadmaps are available for browsing and offline use on this site and also delivered as standard component of SAP Solution Manager - the implementation and operations platform.
ASAP Roadmaps
Deliver transparent, proven approach helping the project team to reduce implementation time, costs and risks throug efficient implementation process
Achieve better results by leveraging the experiences of other successful projects
Knowledge management - use the Implementation Roadmap for SAP Solutions to gather knowledge on how to organize and run your implementation projects
Benefits
Provide proven, practical and cost-effective project implementation approach. Flexible, scalable and tailorable to meet Project and Customer needs.
Leverage SAPs vast experience in the implementation, upgrade and operations of its Solutions as well as industry recognized best practices for effective Business Solutions.
Extends across all aspects of the solution life-cycle; from strategic reviews and analysis, to design, implementation, training and post project support.
Is scalable and can be tailored to meet customer and project specific requirements and constraints.
Supports different project types (single-site, multi-site, template, prototype, upgrade, evaluation, etc.)
Has been developed over many years to deliver cost-effective and successful implementation and is being continually enriched with content based on the experiences gained in implementing SAP Solutions
Please have a look at below links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/501c66ff-c31c-2a10-62ad-9588691d78ae
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30d4a91c-a9ac-2a10-57b3-84817be370b8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50766901-7be7-2a10-1e99-d6723d46f696
https://service.sap.com/roadmaps
I hope this helps you..
Regards,
Ramki.
Similar Messages
-
Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?
Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768. -
Do we need to create individual shipment document for Transportation Chain
Do we need to create individual shipment document in Transportation Chain if the forwarding agent is same for all shipment?
For Example :
first it takes truck,
then ship,
then again truck to reach Customer.
in all above case forwading agent is same eg: DHL ServiceHi Doak,
Yes you need to create individual shipment document in Transportation chain.
For Example : when the trucks go from their respective shipping points to the harbor, the freight documents should not also contain main leg and subsequent leg information. When you create texts, you would not know if they are supposed to be valid for the preliminary, main or subsequent legs.
In order to avoid such limitations, we would recommend that you denote a transportation chain using multiple shipment documents. You can create these shipment documents almost automatically by using collective processing.
If you want depict a transportation chain within a shipment document, you must also accept the limited functions available to you.
The reason: Almost all shipment document functions refer to the document as a whole:
1.Outputs can only be printed for the entire document, not for individual legs
2.Handling units can only be created for the entire document, not for individual legs
3. The same is valid for texts, deadlines in general, etc.
Hope this provides you some clarity. Reward points if helpful.
Regards
Srikanth.A -
Need an example for work flow based on multistep activity
hi,
i need an example for work flow based on multistep activity for practicing.please do the need.
thanksHi,
Workflow document information:
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
&**********Reward points if helpful**************& -
Need to convert pictures and documents to PDF
need to convert pictures and documents to PDF
Hi BodyWhys,
Please do below if you are using Adobe Reader:
1. Launch Reader
2. Select "Tool" at right pane
3. Sign in with your Adobe ID and password after clicking "Sign in" under "Tools"
4. Select "Create PDF" tab
5. Click "Select File" button
6. Select your picture or document (please see more information on supported file at http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_Convert_a_file_to_PDF)
7. Click "Convert" button
8. Click "View PDF File in Reader" after converting the file
Please do below if you are using online service
1. Login to https://createpdf.acrobat.com/signin.html with your Adobe ID and password
2. Select "Convert to PDF"
3. Click "Select Files" button
4. Click "Download" button in progress bar after convert is complete.
Please let me know if you have more quetions.
thank you.
hisami -
When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.
-
Does anybody can help me? I have a document in Adobe Illustrator Artwork 12.0 but don't have the program to open it (and don't know which one I need)
If I send the document, could you please convert it into .pdf or word. It's a letterhead for the church I work at.
Thank you very much.E-mail the Illustrator document to me at the following address:
harron {at mark} kurakichi {dot} com
If you can, put the .ai document in a .zip archive before e-mailing. -
I need to turn an indesign document into an editable pdf. how do I do that?
I need to turn an indesign document into an editable pdf, how do I do that?
InCopy is a solution, but it's not the only viable solution.
I update many books, from 200 pages to 3,200 pages every year, long document, very techincal tax books.
Some are done through InCopy, some are edited word files and rtfs exported from InDesign, some are marked up hard copies etc.
It totally depends on the clients technical ability with computers. Last year I taught over 30 authors of ours how to use InCopy. Some were receptive, some were dubious, some were totally clueless.
And on the dubious and totally clueless I spent more time troubleshooting their problems than I would normally with a Word/RTF option.
Some people are capable of switching to InCopy or even know how to use it in the first place. For anyone never used InDesign or InCopy before then it's a massive learning curve to jump from MS Word et al word processors, to InCopy.
I do agree, it is the best solution that's out there, technically. But that solution is not usable by a lot of people.
Yeh if the client is comfortable with InCopy then it's the way forward.
But in most cases, in my experience, it's faster and more efficient to Export the text as RTF and let the author update the RTF. That leaves you in control of reinserting the text and formatting it correctly. Rather than letting the client add bold, underline, italics, superscript, subscripts, crazy workarounds because they didn't know how to do it properly. And in the end you end up with 2 or 3 times the amount of work than is necessary, just cleaning up what the client has done in InCopy that does not suit the overall formatting of the publications. -
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
mule13470
Apr 3, 2014 11:12 AM
I tried simply renaming them however it just corrupts the files when I do it like that so I need the applescript to open the files in excel and the save them as .xlsx to test I only need it one folder but if it works I'd like to be able to do it for all documents with .xlsb extentions that are in a huge folder with subfolders that contain a mix of .pdf, .docx, .xlsx and .xlsb. Please Help.
Applescript Editor, Mac OS X (10.6.8)
I have this question too (0)
Reply
Categories: Using OS X MavericksTags: mac, help, finder, excel, applescript_editor
Level 1 (0 points)
mule13470
Re: I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsbApr 3, 2014 11:19 AM (in response to mule13470)
In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.
-
I need to change a PDF document
how do I change a PDF Document?
Hi Graffiti
I just signed up adobe Export PDF paid 23.88 per year,. to be able to
change a PDF document. I don’t see where the icon or how to start to use
PDF to change a document sent to me. Please help.
Thank you,
Terry
From: ~graffiti
Sent: Friday, April 03, 2015 2:48 PM
To: Allan Sockol
Subject: I need to change a PDF document
I need to change a PDF document
created by ~graffiti <https://forums.adobe.com/people/%7Egraffiti> in *Adobe
Reader* - View the full discussion
<https://forums.adobe.com/message/7402911#7402911> -
Need a Free designing program. for example: something to help me make shirt
Need a Free designing program. for example: something to help me make shirt graphics, posters, and other designs. i do not think my mac came with any such program. i have ilife 08 but i dont think anything there can help me?
Got to VersionTracker or MacUpdate and search.
-
Need a output based on document no and company code
Hello All,
I am new to BI and appreciate your cooperation
I have a requirement where in I need a total count based on Document no and company code in the Report where in a document no can exist in multiple company code
Say for eg
Doc No CompanyCode
123456 1000
123456 2000
222222 2000
333333 2000
Now I need the count based on document no and company code in the report. Kindly advice
Thank you
PoonamHi Poonam,
I don't know if this is possible in Query Designer level..
Here is my suggestion:
1. Create a new infoobject that will be used for the combined Doc No and Comp Code
2. In transformation level, create a field routine that will CONCATENATE the Doc No and Comp Code in the infoobject you have created in STEP 1
3. In Query Designer, make a FORMULA VARIABLE and choose REPLACEMENT PATH (select the infoobject you have created in STEP 1)
4. In replacement path tab, choose INFOOBJECT, then ATTRIBUTE, and select CONSTANT 1 (forgot the exact name but there is constant 1 something in the selection)
5. Create a global CKF with this formula (FORMULA VARIABLE * 1), this is necessary because sometimes the FV doesn't work without doing this
6. Use the global CKF in your keyfigure structure, it will show the number of UNIQUE combination of Doc No and Comp Code
Regards,
Loed -
Need to create multiple PA documents during billing
Hello,
We have the following scenario.
When we create a billing document from an SD order, we need to create multiple PA documents based on the condition types. We have maintained those condition types to different value fields in KE4I.
For e.g, for a line item in an order, we have Basic Price = 100, Discount = 20
When we do billing for the above line item, we want to create two PA documents, one for the Basic Price and one for the discount. Note that the above Basic prive and Discount are mapped to different value fields and different cost element groups.
Thank you.
BalaHi,
This functionality is not possible not does it make any sense. SD conditions are mapped to value fields via KE4I. If you have not activated summarization (tcode KE2S) then for every SD item you will get a COPA document. Each COPA document will contain all the values fields filled via the SD conditions displayed in one line item.
Imagine if you have a SD billing document with 20 items, each items containing 10 conditions. Then you will get 200 COPA documents as per your requirement !!! This does not make any sense neither from technical point of view nor from business point of view.
regards
Waman -
I need to call a html document
I need to call a html document , that is i need to call
Internet explorer/Netscape browser through forms say when a
button is pressed or mouse clicked ,does anyone have a solution
for this .
Thanks,
nullMohammed kamran (guest) wrote:
: gang lee (guest) wrote:
: : Mohammed Kamran (guest) wrote:
: : : I need to call a html document , that is i need to call
: : : Internet explorer/Netscape browser through forms say when
a
: : : button is pressed or mouse clicked ,does anyone have a
: solution
: : : for this .
: : : Thanks,
: : reply:
: : use "show_document" build-in
: I used the built in WEB.SHOW_DOCUMENT long back but this
doesn't
: work .
: Thx
Try with:
DDE.APP_BEGIN.........
null
Maybe you are looking for
-
Open Purchase order can we maintain commitment item for the year
hi my requirement is for the year open purchase orders we need to maintain commitment item previously it was not maintain from this year we need to maintain is it posssible
-
i recently tried updating to ios 6, which actually left my ipod in a recovery loop. i got it to work again by getting to to the restore from backup part using my mom's computer. however, now that i want to update my music on it, everytime i plug it i
-
Please help a desparate man, smile. A computer tech, , put ubuntu on my computer and installed firefox several years ago. Now when I try to update it to the new version, it wont update. I do see a note on the firefox instructions that if linus was pl
-
I would like to know if face time app can be activated once my iPad mini is used in my home country in the Philippines. I bought it in Qatar and I learned that face time app was disable in this region also.
-
Inconsistent Results from Transport Rule to reset SCL
I have a client who has multiple sites. Their exchange server receives "scan to email" emails from a Canon C2020 Digital Multifunction on a different site. To stop the Exchange 2013 Spam filter blocking the emails, I set up a Transport Rule. The rule