Hi, I need assistance setting my Blackberry 8310 up t...

Hi,I need assistance setting my Blackberry 8310 up to be a modem for a laptop via usb. I'm currently using XP. My service provider is (removed personalinformation)
Message Edited by thundergeek on 07-16-2009 10:39 AM

Hi there!
Please see these KB's for instructions:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB04664&slic...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB05196&slic...
If that does not work, then please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I need assistance setting up a classroom network

I have an Apple Lab in my room, have been using a cobbled together network and now need to establish a solid network protocol and get my lab working fully.
Computers in use:
     iMac's (17, various generations)
     Powerbooks (4)
     Macbook (1)
     MacPro desktop (1)
          LaCie 10TB storage
          Pegasus R4 3TB storage
     I have an ethernet wired network connecting all computers, manually assigned IP addresses...what I would like to do is use the network for more than just a platform for Remote Desktop...I'd like to utilize it to the fullest - allowing all machines access to the storage devices (hooked to the MacPro via Thunderbolt) and working in my Tri-Caster 410 switcher (a NewTek product that can handle duel ethernet connections, one to the school's network and one to my network). so that our file transfer is not tennis-shoe transfer and we can use the storage devices as entire class storage devices.
     All the parts are there, I just need to know how to make the connections and how to set up a pathway through the MacPro to the storage devices that won't allow complete access to that computer...
many thanks
Bryan

Hi Bryan,
I think this mostly depends on how you setup File Sharing on Mac Pro, & the Permissions/users you setup, but first...
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Also, what are the IP Ranges on the dual Ethernet connections?

New to SCOM need assistance setting up an Alert / Monitor

I've recently deployed SCOM 2012R2 to accompany our SCCM deployment and to replace other monitoring software. I'm having difficulty figuring out how to create a monitor that will alert us when a logical drive falls below a specified value of free megabytes.
I'm having difficulty in finding documentation that will help me do the following:
We have a 2 node cluster with a 5GB drive (X:) we use as a mounting drive to mount larger disks within as spanned volumes. We need to have a monitor in place so that we know when these drives are reaching the end of their capacity and we need to bring
a new one online. The volumes being mounted here are approximately 2.4TB each. The monitors we want in place are for if the disk has less than 20GB, 15GB, 10GB, 5GB, 1GB, & 512MB ... so I am looking at 6 alerts total for one disk.
Once a disk fills up it we stop all write actions to it and start using the new one, so I also need to stop/prevent any space monitoring on disks not currently being written to.
Any assistance greatly appreciated!
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

Hi There,
You can create a basic Simple threshold unit monitor. Target the monitor to "Windows server operating system" with the below configuration as per your screenshot.
The below setup will do good for Space below 20GB.
This setup will work if your instance remains same "X:\IMGWH29-33" same all the time in all the machines in which you want this alert.
So what i have mentioned is for the below X:\ Drive throw a alert if the disk space goes below 20 GB.
And as the Permfon is collecting data in MB and not in GB hence i have mentioned threshold as 20000 so if the space goes less than 20000 MB (20 gb) throw me an alert.
Threshold settings Under threshold is critical i.e If it is below 20 Gb throw me an alert, If it is above 20 Gb dont throw me an alert.
Hope this helps. Also confirm if the instance name "X:\IMGWH29-33" remains same all the time or not.
Gautam.75801

[865PE/G Neo2 Series] Need assistance setting up lm_sensors (2.9.1)

I need some help setting up lm_sensors. At present I have the following results of running sensors.
As it can be seen the values plus the minimum and maximum values for readings are not correct.
For example +12V reads 2.80V
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.37 V (min = +1.31 V, max = +1.44 V)
+12V: +2.80 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.12 V (min = +3.14 V, max = +3.47 V) ALARM
+5V: +4.88 V (min = +4.75 V, max = +5.25 V)
-12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +4.95 V (min = +4.76 V, max = +5.24 V)
VBat: +2.99 V (min = +2.40 V, max = +3.60 V)
CPU Fan: 2743 RPM (min = -1 RPM, div = 2)
M/B Temp: +38 C (high = +44 C, hyst = +0 C) sensor = thermistor
CPU Temp: +46.5 C (high = +120 C, hyst = +115 C) sensor = diode
vid: +1.375 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
eeprom-i2c-0-52
Adapter: SMBus I801 adapter at 0c00
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 0c00
Memory type: DDR SDRAM DIMM
Memory size (MB): 256

could'nt find any real clue's it was running linux
anyways, i dont know what u are using that pc for, else instal windows will solve the problem of not being able to instal speedfan

I need assistance setting up my time capsule please.

Can't setup my time capsule. Keep getting blinking amber light which means not connected to the internet.

We can likely help, but we will need to gather more information before we can begin to start the troubleshooting process. Things like.....
1) What device that you have the Time Capsule connected to.........in other words, the make and model number of your modem....or....it might be a modem/router combination device as well.
2) We assume that you have the Time Capsule connected to the modem with an Ethernet cable. Would that be correct? Have you verified that the Ethernet cable itself is working correctly?
3) What operating system are you using on your computer to configure the Time Capsule?
If you have a Mac, and are not sure, click the Apple icon in the upper left corner of the screen, then click on About This Mac and post back with the OS X version number that you see there.

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

I need a list of movie converters for blackberry 8310.

I need a list of free and pay movie converter for the blackberry 8310. Thnx in advance.

There's an Appendix for the 6.3.2 VSM API documentation that I think is about as close as you're going to get:
http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/api/reference/vsmapi/srcTypeAppdx.html
Hope this works out for you.
Cheers,
Scott Olsen
Solutions Specialist
Bulletproof Solutions Inc.
Web: www.bulletproofsi.com

Blackberry 8310 not showing reply or send in sms text options menu

I have a blackberry 8310. iam able to recieve sms text messages but when i click to on options, there is no "reply" option in the menu for me to be able to reply to the text. The chip works fine in other phones so that tells me something in the phone is not set right. There is no option for me to even compose and fresh sms text message. Please help?

Here ya' go:
1. Get a good backup of your device: BB device backup (I keep all my backups in a separate folder created for that purpose so they are always in one place and easy to find.)
2. Download the most recent version of device software for your carrier: Downloading BB device software
3. Reinstall the device software: Clean reload of device software
4. Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart.
5. Once you have the device OS successfully installed you will then need to reinstall any 3rd party apps you currently have on your device: Install applications using the app loader tool
6. Complete another battery pull routine after each 3rd party app installation to reclaim memory and refresh your BB.
Let us know how it goes.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

How to Connect N800 to Blackberry 8310?

I'm having trouble connecting a N800 tablet to my Blackberry 8310 phone to access the internet. My operator is AT&T.
The N800 is able to pair with the 8310 and it's been updated to the latest OS2008 software using the Nokia Software Wizard.
I've also tried setting up the Edge Data and AT&T Internet profiles in Cellular Operator Setup Wizard on the N800 through the Connection Manager settings app...neither profile works. The error message reads: "Internet Connection failed. Try Again?"
Is there a special profile for Blackberry Data or some other Blackberry service setting I need to make to use my 8310 as modem?

The Blackberry 8310 does not have a modem function, hence your difficulty in trying to obtain an internet connection with the N800, you will need a compatible Bluetooth enabled Nokia to succesfully connect your N800 to the internet.
The only blackberry model that could be used as a modem was the 8707 and that was simply because it had 3G.
Hope this helps
Message Edited by mbamg on 03-Jan-2008 08:49 AM
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Installation of Blackberry Desktop Software fails: looking for Blackberry 8310.msi file

I cannot successfully install and use any version of the Blackberry Desktop software. The problem started when I tried to install the desktop software on my new computer from a file I downloaded and stored on an external hard drive that had been attached to my old computer. The install/uninstall programs lists Blackberry desktop 4.2.2. It appeared to install correctly, but when I try to use it, I get a message saying the program is trying to use a network resource that is not available, and looks in a temp directory for this "Blackberry 8310.msi" file. There is also a program listed as "Blackberry v4.2.2 for the 8310 series wireless handheld" When I try to uninstall it, it looks for that same .msi file.
I'd like to be able to sync my calendar with my phone.
Does anyone know what I should do? I followed the clean uninstall directions, and that didn't make a difference.
Thanks.

SDR wrote:
Xandrex, I am having the same problem (along with a few others). I hate to sound like a novice, but how do I decompress into a folder other than temp? Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
Hello,
I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
http://www.7-zip.org/
Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Assistance Setting Presets for Exporting to .FLV

I need assistance in customizing the presets for exporting a file to .flv format. Here is what I need Abode to export TO:
.flv
320x240
4:3
800kbps
29-97 fps
audio - 44 khz 66kbps stereo

Jesse_Martinez(Calvary)
Your requirements are stated as
.flv
320x240
4:3
800kbps
29-97 fps
audio - 44 khz 66kbps stereo
You can accomplish nearly all in Premiere Elements 12, but there is a problem achieving the exact audio sampling rate/bitrate combination that you list.
In Premiere Elements 12, go to Publish+Share/Computer/Adobe Flash Video and select Presets = FLV - Web Large NTSC Source (Flash 8 or Higher) On2VP6 MP3 FLV
Under the Advanced Button/Video Tab, make adjusts
Remove the link between Frame Width and Height and type in
Frame Width = 320
Frame Height = 240
Bitrate = 800 kbps (kilobits per second)
Under the Advanced Button/Audio Tab, make adjusts
Output Channel = Stereo
Bitrate Settings - now here is where it get tricky...there is no set for sampling rate/frequency = 44 KHz or other. And, there is no audio bitrate of 66 kbps (closest is 64 kbps), There appears to be a sampling rate associated with the export, but viewable once you have the export and look at its properties in a program such as MediaInfo.
Here is what I found
if the audio bitrate = 64 kbps, then the sampling rate is 22.05 KHz
if the audio bitrate = 80 kbps, then the sampling rate is 22.05 KHz
if the audio bitrate = 96 kbps, then the sampling rate is 44.1 KHz
if the audio bitrate = 128 kbps, then the sampling rate is 44.1 KHz
Are there trade offs for you or must you have those exact values that you posted?
H.264 AAC F4V
If you were to export your Timeline as F4V, then you would have the opportunity to set sampling rate 44.1 KHz and bitrate 64 kbps.
We can discuss other not mentioned settings later once we have worked through the core ones.
Please review.
Thanks.
ATR

Migration Assistant/ Set-up Assistant/ Copy and Paste/ Other?

Hello Wise Ones,
I have just installed a new HD and am wondering how to transfer my old files, a sparsebundle/image, from an external HD to this brand spanking new HD.
For context,
1) Acquired an external HD.
2) Saved a File Vaulted account onto that HD (Western Digital HD; used WD Smartware).
3) Upgraded from Tiger to Snow Leopard.
4) Time Machine backs up the information of Guest account but not the main account, the Filevaulted account.
5) Rigamarole follows, but sparsebundle/image becomes mountable and files accessible.
6) Internal HD fails.
7) New Internal HD installed just yesterday.
8) Migration Assistant restores the Guest account files. But the sparsebundle/image is not an option.
So, as it stands now I have two accounts on the computer: the newly created account and the migrated old (Guest) account. I seem to have all of the programs I think I should have. But, as you might imagine, my Documents, Movies. Pictures etc folders are empty.
The external HD shows me all of my created files. So, if need be I can just copy and paste those Documents, Movies, Pictures, Desktop folders, yes? (Alas, Migration Assistant doesn't -- um, pickup, recognize -- that sparsebundle/image.)
But what of the inner workings? Most notably, what of a Library folder. I see it there on my sparsebundle/image. It appears to be on the same tier as the Documents, Desktop, Movies folders. Meaning, I'm guessing that this Library folder is personal to this account, not to the computer as a whole. Therefore, if I select my account found on the new HD and find its Library folder, and then paste over it with this sparsebundle/image Library folder then all will be okay? Thus I'll have all of my mail messages/inboxes and all of my Safari Bookmarks and other goodies?
So, um, the best way to proceed? Migration Assistant; Set-up Assistant; Copy/Paste; or other?
Thanks again for your insights and patience.
Lex
P.S. Would it matter that the the sparsebundle/image folder has an account name that is different than the name for this new drive and this new personal account? So, damaged HD was named Lexy. But sparsebundle/image account has the name Lex. With this new HD the HD is named, Smith and the personal account is named LexSmith.

Not sure about the File Vault password protected thing is the problem with migrating. If you have room on the drive, try opening up the image and copy the user account from the image file straight to the drive itself, thereby eliminating the use of the image. Then try the migration.
Other than that, I can only suggest manually copying the files from each folder to your new user folder.
If it's your whole user account and it's a different name than the user account on the new computer, you might try to copy the whole user account over to the user folder and then see if you can switch user to that account.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

Hi, I need assistance setting my Blackberry 8310 up t...

Similar Messages

Maybe you are looking for