Hi I need OID's and the MIBs for CISCO 6504 with SUP32??
Hi I need oids and the related MIBs for cisco 6504 with supervisor 32:
Fanstatus notification, Powerstatus notification, Interface up/down, BGP notifications like peer down bgp established, ospf notifications
Thanks,
Anudeep
Fan status
CISCO-ENV-MON mib
"ciscoEnvMonFanStatusEntry" "1.3.6.1.4.1.9.9.13.1.4.1"
"ciscoEnvMonFanStatusIndex" "1.3.6.1.4.1.9.9.13.1.4.1.1"
"ciscoEnvMonFanStatusDescr" "1.3.6.1.4.1.9.9.13.1.4.1.2"
Power
ciscoEnvMonSupply
S
tatusEntry" "1.3.6.1.4.1.9.9.13.1.5.1"
"ciscoEnvMonSupplyStatusIndex" "1.3.6.1.4.1.9.9.13.1.5.1.1"
"ciscoEnvMonSupplyStatusDescr" "1.3.6.1.4.1.9.9.13.1.5.1.2"
"ciscoEnvMonSupplyState" "1.3.6.1.4.1.9.9.13.1.5.1.3"
"ciscoEnvMonSupplySource" "1.3.6.1.4.1.9.9.13.1.5.1.4"
Interface
IF-MIB
ifAdminStatus 1.3.6.1.2.1.2.2.1.7
ifOperStatus 1.3.6.1.2.1.2.2.1.8
BGP
BGP4-MIB
for the rest i will leave it to you to find the exact OIDs
use this link to find other mibs that may interest you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=BGP&translate=Translate&submitValue=SUBMIT&submitClicked=true
Similar Messages
-
Need MIBs for Cisco 2500 Series WLC
Hi,
I need the MIBs for Cisco 2500 WLC.
I have it for 5508 WLC. Does it works same for 2500 WLC too ?
Regardsthey should be very similar. There would be more trees available for the 5508 over the 2504.
You can get the MIBS for the 2504 from the Software downloads section of CCO.
Steve -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.
Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable. -
A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?
Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?
There was no new serial needed to update from Logic 9 to 9.1.7
If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
Otherwise, it's best to call Apple directly and get them to help you... -
I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon
I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
Given iPad 2's are no longer being sold, I doubt any that could be bought would have a warranty still. Or have at most very little of it left.
Why an iPad 2? its now 3 generations behind the current one.
Perhaps an iPad 4 would be a better choice. -
BOM Explosion needed on PO and/or Delivery for Stock Transfer PO Process
Good afternoon,
I have been researching the SDN and web for a solution to my problem to no avail so far.
The business problem I need to solve is the requirement for our STPO process to explode certain BOM's that are transfered from one company/plant to another company/plant in order to record batch/serial # component information by the delivering plant on the delivery and verification of the batch/serial # in the receiving plant during MIGO processing of the delivery. This is needed by our Service Mgmt department in order to track servicable items within the Finished Good (medical devices industry).
It appears on the SDN that a BOM can not be exploded on a non-Subcontracting PO (which would be ideal for us), but barring this problem, we are trying to have the BOM explode in the Delivery created from the STPO via the VL10B transaction.
The STPO generates a Delivery doc with type NLCC and item category NLC. I have maintained the material master for the BOM material to have an Item Category Group of ERLA, and I have modified Item Category Determination in configuration in Logistics Execution for deliveries to include ERLA, usage V, and NLC as default item category. But, the deliveries generated from the STPO still do not explode, like what normally happens if the delilvery of the BOM was created from a standard Order.
The components for the BOM need to be displayed on the Delivery (if not the STPO), so the cleark can record the Batch/Serial #'s for each component. Then when the receiving plant posts the Goods Receipt for the delivery a user exit we have (based on movement type and material document code) builds a Service Mgmt table that is then processed to De-install the BOM and components from the former plant and install the BOM and components at the receiving plant (and then subsequently at the ultimate customer's location when a normal sale is made), generating a new Functional Location.
Has anyone here had to do anything like this before? Would any of you have any ideas on how this BOM explosion might work on the PO or Delivery?
Thanks in advance.
Scott.No responses to this question.
Subject dropped. -
I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!
Bucktr09:
I'm having the exact same problem. I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen. I can get my library content but the store is a no go. Is there any one out there with a solution? -
Do I really need to keep all the preloaded apps that came with my MacbookPro 13'' mid 2010
Do I really need to keep all the preloaded apps that came with my MacbookPro 13'' mid 2010? Which one are necessary to keep from your experience. Thanks
Lots of apps are preloaded on a new MBP. Tell us which ones you don't think you need, and we'll tell you whether you can safely get rid of them.
However, the total space used on your hard drive by all the apps that are preinstalled is very small, and if there's any chance at all that you may eventually want to use them, you might as well keep them handy.
By way of example, my own Applications folder contains everything that came from the factory preinstalled in it, plus 2.5 years of subsequent additions totalling 196 applications of all kinds and sizes. Still, it only occupies 12.5GB of my 500GB hard drive. -
Need to install only the query for fi account receivables standard data ?
Hi all,
I need to insall only the query for the standard business content for fi_ar in bw 3.5 ?
i have selected the cube and then in grouping i have selected data flow afterwards only.
And i have selected the queries only. but the cube is selected again. Should i uncheck the cube and install only the queries and transport it?
Pls guide me on this!!
Thanks
PoojaHi,
If the required cube is already avaialble and continue with the existing design, you can uncheck the cube and install only queries. Check all the prerequisites before installing queries like used infoobjects, other targets if any.
Hope this helps,
Regards,
Rama Murthy. -
Needs help to know the different versions of forms with their compatibility
Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
Kindly give the details or any suitable link for the same.
please consider it as on urgent basis.
regards,
rajeshRajesh,
the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
Frank -
I have a ipod 4 and I just bought a iphone4 how do i sync apps and the progress for those apps?
I have a ipod 4 and I just bought a iphone4 how do i sync apps and the progress for those apps?
Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible -
I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?
Hi barryfromwarrington,
Welcome to the Support Communities! There are two things I can think of to keep your Stepdad's information separate from yours on the computer and the iPad. On the computer, he should have his own administrative account, and on the iPad he needs his own Apple ID for iTunes and iCloud services. Here is some basic information to get started. I don't know if you have a Mac or Windows computer, so I'll include info for both.)
OS X Yosemite: Set up users on your Mac
http://support.apple.com/kb/PH18891
OS X Yosemite: Set up users on your Mac
If your Mac has multiple users, you should set up an account for each person so he or she can personalize settings and options without affecting other users.
Add a user
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user.
administrator: An administrator can add and manage other users, install apps, and change settings.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
For an administrator, select “Allow user to administer this computer.”
Last Modified: Nov 18, 2014
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
Open iTunes and see if the issue you're experiencing persists in this new user account.
Frequently asked questions about Apple ID - Apple Support
http://support.apple.com/en-us/HT204161
iCloud: Set up iCloud
http://support.apple.com/kb/PH2609
Cheers,
- Judy
Maybe you are looking for
-
Multiple channels reading on SCXI 1600
Hi, I'm trying to implement reading of 64 AI channels using SCXI-1600 and two SCXI-1100 modules. All channels have to be read once or twice per second. Reading will be initiated by software. I thought this should be implemented by DAQmxCfgImplicitTim
-
Hi Quick question about Tabs. How do I set it so that new Tabs open with my homepage. At the moment, for tabs beyond my first page I am getting advice "page not found" regards ral
-
Hello! What does the recovery monitor check? I know that a message will stop in recoery monitor if a sender is not set up in the splitter . But what could be other reasons for something to stop in the recovery monitor? Does it check edi syntax?
-
Filling character array with String
I have character array of size 50. I have a string p="abcdef" I want to fill this String in char index ranging from 25-30(specific range). Is there any method to do this?? Please suggest me
-
Firefox eventually consumes all available hard drive space while running
I have 1-2 GB available on my hard drive. When I leave Firefox running for a while (a few hours to a few days, not sure what triggers this behavior), my available hard drive space goes down and down until it gets down to 0. If I quit Firefox, the har