Hi ...... i neeed help

hi guys
i have propleam with a game name high noon my fraind bay with his id and now my char in the game with has id in has i phone and i cant play with my phone olny with log in has id in the game center 2 se my char in my phone he do thats 2 bay for my with has id becouse my id ats free
ok any one can help me with this .......... i neeed help

Apps ( even free ones) are always tied to the account from which they are purchased.
You need to purchase the app with your own account.

Similar Messages

  • Neeed help installing Mac Os X on External Drive

    i have a 10 gb hard drive, and i can install mac os 9, eaasliy but when i tried to install os X on my external hard drive. i rebot from disc one, then click english, then conmtinue, then aggre, and then it ccomes to the part were i pick where to install, and i only see my computer hard drive, Yet when i go to disk utility, i see the drive, and when i put the pb normaally it mounts without a problem. does the little moveable thing next to the power plug matter?
    any help will m,atter

    here is some additional info
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    1394:
    Manufacturer: COMBO
    Model: 0x1
    GUID: 0x50770E0001377A
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    1394 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x12804
    Product Revision Level:
    Sub-units:
    1394 SBP-LUN:
    Capacity: 9.56 GB
    Removable Media: Yes
    BSD Name: disk2
    OS9 Drivers: No
    S.M.A.R.T. status: Not Supported
    Volumes:
    STEVEN:
    Capacity: 9.56 GB
    Available: 9.55 GB
    Writable: Yes
    File System: MS-DOS FAT32
    BSD Name: disk2s1
    Mount Point: /Volumes/STEVEN 1

  • 357123044041886 - Neeed help to resolved my issue

    Dear Team,
    kindly go by the trail as per the mail blackberry Service center cannot repair my mobile then who is going too can i get the answer ?
    2 ) if you cannot make the my phone  then provide me the new mobile other wise i will case on this mail
    3 ) My Blackberry issue was just Charger Slot issue its broken,  dont show me other things of my BBM is perfect working fine..
    4 ) i Need too solve just my Charger & Usb slot issue to get resolved.
    Kindly help to resolved i came on blackberry Service center not other company you cannot say noo pls do needful..
    Regards
    Shadab Shaikh
    Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

    I think the following Oracle two note looks interesting:
    Note: 330725.1 Scheduler Job has Been Locked For Days Ora-27468
    Note: 731678.1 Scheduled jobs do not run as expected after 10.2 upgrades
    HTH -- Mark D Powell --

  • I really neeed help!

    my album art still is not working
    i need help!

    Are you getting an error or what?
    Try this...
    First, connect the iPod and open iTunes. In iTunes, go to edit-->preferences. Hit the iPod tab. Uncheck "Show album art on iPod". Click OK. Now go back and reenable the option. Click OK. Let the iPod update. The album art should now be there.
    If it doesn't work, then after you disable the option, let the iPod update and eject it. Now connect it back up and reenable the option.
    btabz

  • Do you neeed help upgrading your Oracle Forms to the Web?

    If you are looking for help upgrading your Oracle Forms applications to the Web, join Oracle's partner for free internet seminars and see how they can help you.
    These seminars feature partners specializing in character mode to the Web migration.
    Seminars are scheduled online on Feb-13 and 14 11:00am PST (California time).
    To register:
    http://oracledirect.oracle.com/iccdocs/seminarList.shtml

    Hi, We are in the process of converting our inhouse developed applications (Forms 5.0 and Reports 3.0) into web enabled one. Since I am outside the US , I am unable to attend the free seminar help recently. I would appreciate your help in sending any documentation/handouts on the current topic. This will help me a lot.
    Kind Regards,
    Pandian
    Muscat

  • Oracle8170 patch ( to 81711) NEEED HELP Please

    Hi,
    I have ora 8.1.7.0 i tried to upgrad it using patch 8.1.7.1.1
    when i start installing it , it prompts dialog with message
    1) "Error While writing on "D:\oracle\ora81\bin\ociw32.dll"
    2) "cant found "D:\oracle\ora81\xdk\lib\XSQLConfig.xml"
    I ignored these error and continued my installation and installation ended "successful completed"
    Next step was to connect as "Internal" or "sys" (using Sqlpuls) and execute scripts
    1) %oraclehome%\rdbms\admin\catalog.xml
    2) %oracleHome%\rdbms\admin\catproc.sql
    also
    3)catrep.sql (only applicable for sites running Oracle Replication)
    4)utlrp.sql (optional - will recompile all PL/SQL packages now rather than when accessed for the first time)
    MY CONCERNED::
    when i executed first script (catalog.sql) it as for some values
    e.g
    "Enter value for views: "
    << it entered 1000 it gives ...
    Enter value for views: 1000
    old 53: Rem rherwadk 02/12/99 - compatibility for parameter tables & views
    new 53: Rem rherwadk 02/12/99 - compatibility for parameter tables 1000
    Enter value for dba_lobs:
    >>
    I have no idea (since not much Admin/DBA know of Oracle) what values should i enter to all the things it ask
    i have not executed other sql and i dont know what do you
    I NEED HELP IN ORDER to Successful UPGRADE my ORACLE 8.1.7 ( into oracle 8.1.7.1.1)
    PLAESE HELP or suggest what should i do I M stuck and do not want to destroy my previous ora installation
    but also need to upgrade it HELP URGENT !!!!
    I would really appritiate any HELP/comment
    my address is [email protected]
    Adv Thanks
    ~at

    You can only send one at a time.
    If you do a whole lot of this, you may want to check out the new .mac service with web galleries which works with the new iPhoto. You can easily post a picture to the web gallery from your phone. Your recipients can easily access the web gallery through their browsers. Good demos available at apple.com, or see the Steve Jobs video from the iMac announcement.

  • Neeed help

    i need help i just got a blackberry curve 9300 this morning deviered and i made a blackberry id account and it lets me sign in on the computer but if i try to sign in on the phone it says an error has accured please try again later.
    please could you help me out

    If your BlackBerryID includes a numeral are you pressing the ALT key at lower left to activate the numbers before typing that numeral in the BlackBerryID?  Same applies to your password.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Screen shows iTunes logo and USB cable and thats all its doing - how to reset? I neeed help!

    I just got my Iphone and all its doing is showing the USB cord Logo and the Ituns logo, I need help ASAP!

    http://support.apple.com/kb/HT1808

  • Hi neeed help in user exit !

    i have activated one project for an user exit but i saved it as a local object....but according to the clients requirement i have to transport it to other system...so it would have been better if I couls have saved it in the devclass...with a transport number.....
    Can I do it now  !
    Can i do it as 'save as '....?

    Hi,
    Pls go to CMOD->enter the project name->Choose attributes->click on change and then save it in the required package.
    Thanks,
    Sandeep.

  • Neeed help to write a case statement

    I want to write a case statement such that
    i have four name sunny,katie,linda,scott in which sunny is the manager
    the rek is that under sunny if katie,linds scott falls then i need to show "yes" in coloumn other wise "no"
    like
    case when cn1.sunny=cn2 in(katie,linda,scott) then 'y' else 'n'
    Edited by: user13001889 on Jun 20, 2011 1:04 PM

    What is a table structure? Sorry cannot test it right now..
    SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
    FROM tbl
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Hey i NEEED HELP   plz

    hey i just make a ichat account (gmail) i try to add my old msn account to c if it work .,... but i add my msn and when i go in to msn nothing?? it ment to ask me if i what to add *****@gmail so i when back to ichat and add my sister so she when on her msn and the same thing ???
    so i when back to ichat and it just say "waiting for authorization " but there nothing when i go in t msn
    i hope you understand what im saying lol
    plz help

    Hi
    See for MSN http://allforces.com/?p=17&akst_action=share-this

  • CANT READ ITUNES GIFTCARD NUMBER!! PLEASE HELP!!

    THE NUMBER ON MY ITUNES CARD IS ILLEGIBLE!! I NEEED HELP! I TYPED IN ALL THAT I COULD READ, AND I ENTERED THE SERIAL NUMBER...AND FOR SOME REASON THE SERIAL NUMBER ISNT CORRECT!! !

    Try here >  iTunes Store: Invalid, inactive, or illegible codes

  • Uk student..Please help !!

    Hi. I am 17 years old at college in the Hertfordshire region studying java programming. I am really stuck on this program and would be really greatful for some help on this. Below is my program and i am trying to create a survey in which the user clicks on the radio button, then when ok is pressed, the corresponding number is written to a seperate file and then the file is called and displayed to create a sccesful display of previous and present results. PLEASE HELP!!!
    import java.applet.*;
    import java.awt.event.*;
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.JApplet;
    import javax.swing.JTextArea;
    import java.io.*;
    <applet code="Survey22" width = 1025 height = 660>
    </Applet>
    public class Survey22 extends JApplet implements ActionListener {
         JLabel surveypic;
         ImageIcon icon, name, surveyimage;
         JMenuBar menubar;
         JMenu menu;
         JMenuItem menuitem;     
         JRadioButton rb1, rb2, rb3, rb4;
         ButtonGroup group = new ButtonGroup();     
         JTextField field;
         JButton ok;
         JButton clear;
         JMenuBar menubar2;
         JMenu menu2;
         JMenuItem menuitem2;
         JLabel FinalFant, Quak, Crash, Hal, res;
         ImageIcon results = new ImageIcon("RESULTS.JPG");
         public void init(){
    //***************************************************** MENUBAR **********************************************************
         menubar = new JMenuBar();
         menu = new JMenu("Menu");
         ImageIcon results = new ImageIcon("RESULTS.JPG");
         menuitem = new JMenuItem("",results);
         menuitem.addActionListener(this);
         menuitem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_1, ActionEvent.ALT_MASK));
         menu.add(menuitem);
         menubar.add(menu);
    //****************************************************** MENUBAR *********************************************************
    //****************************************************** OPTIONS *********************************************************
         name = new ImageIcon("FINALFANTASY7.JPG");
         rb1 = new JRadioButton(" Final Fantasy",name);
         rb1.addActionListener(this);
         getContentPane().setLayout(null);
         getContentPane().add(rb1);
         rb1.setBounds(10,210,270,140);
         name = new ImageIcon("QUAKE.JPG");
         rb2 = new JRadioButton(" Quake", name);
         rb2.addActionListener(this);
         getContentPane().setLayout(null);
         getContentPane().add(rb2);
         rb2.setBounds(310,210,270,140);
         name = new ImageIcon("CRASHBANDICOOT.JPG");
         rb3 = new JRadioButton(" Crash Bandicoot", name);
         rb3.addActionListener(this);
         getContentPane().setLayout(null);
         getContentPane().add(rb3);
         rb3.setBounds(610,210,300,140);
         name = new ImageIcon("HALO.JPG");
         rb4 = new JRadioButton(" Halo", name);
         rb4.addActionListener(this);
         getContentPane().setLayout(null);
         getContentPane().add(rb4);
         rb4.setBounds(10,365,350,160);
    //****************************************************** OPTIONS *********************************************************
    //****************************************************** EXTRAS **********************************************************
         surveyimage = new ImageIcon("WELCOME.JPG");
         surveypic = new JLabel(surveyimage);
         getContentPane().add(surveypic);
         surveypic.setBounds(10,40,465,150);
         field = new JTextField();
         field.setEditable(false);
         getContentPane().setLayout( null );
         getContentPane().add(field);
         field.setBounds(600,40,100,30);
         ok = new JButton("Ok");
         ok.addActionListener(this);
         getContentPane().add(ok);
         ok.setBounds(575,100,73,30);
         clear = new JButton("Cancel");
         clear.addActionListener(this);
         getContentPane().add(clear);
         clear.setBounds(655,100,73,30);
         getContentPane().setLayout(new BorderLayout());
         getContentPane().add(menubar, BorderLayout.NORTH);
    //******************************************************* Action ************************************************************
         public void actionPerformed(ActionEvent e){
         if(e.getActionCommand() == " Final Fantasy") field.setText(" Final Fantasy");
         else if(e.getActionCommand() == " Quake") field.setText(" Quake");
         else if(e.getActionCommand() == " Crash Bandicoot") field.setText(" Crash bandicoot");
         else if(e.getActionCommand() == " Halo") field.setText(" Halo");     
         else if(e.getActionCommand() == "Cancel") field.setText("");
         else if(e.getActionCommand() == "Ok" || e.getActionCommand() == "") {
         try{
         FileWriter fw = new FileWriter("Survey2Results.txt", true);
         char result = 0;
         if(field.getText().equals(" Final Fantasy")) result = 1;
         else if(field.getText().equals(" Quake")) result = 2;
         else if(field.getText().equals(" Crash bandicoot")) result = 3;
         else if(field.getText().equals(" Halo")) result = 4;
         else if(field.getText().equals(null)) result = 0;
         BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
         fw.write(result);
         fw.close();
         getContentPane().remove(field);     
         getContentPane().remove(ok);
         getContentPane().remove(clear);
         getContentPane().remove(surveypic);
         getContentPane().remove(rb1);
         getContentPane().remove(rb2);
         getContentPane().remove(rb3);
         getContentPane().remove(rb4);
         getContentPane().remove(menubar);
         String out;
         FileReader fr = new FileReader("Survey2Results.txt");
         BufferedReader br = new BufferedReader(fr);
         out = br.readLine();
         int ff=0, q=0, h=0, cb =0;
         for(int i = 0; i < out.length(); i++){
         int nums[] = { out.charAt(i)};
         if(out.charAt(i) == '1') ff++;
         else if(out.charAt(i) == '2') q++;          
         else if(out.charAt(i) == '3') cb++;
         else if(out.charAt(i) == '4') h++;
         res = new JLabel(results);
         FinalFant = new JLabel("Final Fantasy, currently has : " + ff + " Votes.");
         Quak = new JLabel("Quake, currently has : " + q + " votes.");
         Crash = new JLabel("Crash Bandicoot, currently has : " + cb + " votes.");
         Hal = new JLabel("Halo, currently has : " + h + " votes.");
         fr.close();
         getContentPane().setLayout(null);
         getContentPane().add(res);
         getContentPane().add(FinalFant);
         getContentPane().add(Quak);
         getContentPane().add(Crash);
         getContentPane().add(Hal);
         res.setBounds(390,50,200,100);
         FinalFant.setBounds(30,200,300,50);
         Quak.setBounds(400,200,200,50);
         Crash.setBounds(30,400,200,50);
         Hal.setBounds(400,400,200,50);
         repaint();
         }catch(IOException exc){}
    Thanks Matt.

    Do you have a specific problem or question, or would you just like us to do your homework for you?
    If you have a specific question about how to use a certain class or what's creating an exception in your code, we're all more than happy to help out. Otherwise, if you neeed help in designing your project, you should probably see your prof. a TA, or a friend
    Hi. I am 17 years old at college in the Hertfordshire
    region studying java programming. I am really stuck
    on this program and would be really greatful for some
    help on this. Below is my program and i am trying to
    create a survey in which the user clicks on the radio
    button, then when ok is pressed, the corresponding
    number is written to a seperate file and then the
    file is called and displayed to create a sccesful
    display of previous and present results. PLEASE
    HELP!!!

  • I NEEEED HELP PLEASEEE, THIS IS KILLING ME

    i wanna know how to make my videos in slow motion or fast motion, speed it up or slow it down.
    it said on the help video to double click the movie and it will go into the settings, well when i double click, it plays the movie form where i clicked it...
    it doesnt go into the movie seetings
    i neeed help please

    iMovie 06 is a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
    http://www.apple.com/support/downloads/imovieHD6.html
    http://www.geethree.com/slick/imovie8.html
    iMovie 06 and iDVD 08 is a terrific combination.

  • Desperately seeking help with ipod touch sync issue

    i had an ipod classic 32 recently updated to an ipod touch. i have windows xp media center. i tunes has over 1300 songs. initially tried to sync touch only would sync about 100 songs or so. then would get an error 50 "could be sync because of unknown error 50". shut down itunes tried again, got maybe another 50 songs then unknown error 50 shows up. now it will show up only on a few songs and then stops all together. tried to sync new songs to classic and worked fine. tried touch again same thing, error 50. it actually sync video (i only have one on there) and podcasts fine and it actually synce playlists but obviously are not complete because so many songs are not there but the names of the playlist appear on the touch. went to ipod store and they gave me another (still under warranty). same thing. sync few songs, get error 50 and stops. reinstalled itunes and reset touch. still not working. tried to manually sync was able to sync about 500 songs before i got to error 50 and then it stopped again. i have the most updated itunes and the most updated ipod touch software. does anyone know what else this might be? i am walking around with two 32 gb ipods just to hear my music. i bought the touch to upgrade but i feel like my classic is just better. it has all my music on it.

    I am havving exactly the same problem, but I have both with my Ipod Touch and my Ipod classic. I neeed help.

Maybe you are looking for

  • Steps to upgrade from Weblogic Portal 8.1 to Webcenter Portal 11.1.1.6

    Currently I'm involved in consulting for a client who has Weblogic Portal (WLP) 8.1. I'm trying to find documentation for upgrade from WLP 8.1 to Webcenter 11.1.1.6. I found the below link but the starting point for upgrade is Oracle WebCenter 10g (1

  • Error message on Java 1.4.2_06

    Hello everyone, I am really new to Java so bear with me. I am running an application that used java to display views on the web. this view used to be working fine in the beginning but now I always receive the following error message. Kindly find belo

  • Trying to get patch_jboss to publish to non-default container

    I am trying to get the patch_jboss script to publish the two .ear files to the application server in a container named oim instead of the default container. I know the jboss.profile provides the variables for this script, but I can't find the right c

  • Typical Production cycle in Manufacturing / production industry

    Hello All, i want to know about , Typical Production cycle in Manufacturing / production industry... help me....

  • Convert bin file into c++

    Hi, I have the problem described in subject. I am using psiconv but don't work as desired. I want to convert binary file into C or C++ file to be able to edit it and after editing put back into binary file for the router to work on the firmware binar