Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. Any suggestion?

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind Regards

Can you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4

Similar Messages

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Delayed response of when moving objects in diagram and panel, happend in LV 6, only for vi's compiled from previous versions. any suggestions?

When I using the mouse to select portion of the diagram or the panel, or when I moving objects- I found that in all the vi's that I compiled from former versions of labview- there is a delay of close to a second to the actual selection or movement of the item. This happens in 2 machines out of 5 that I tested it, and it happened both in windows 2000 and in windows 98. any suggestions?

Sometimes a video driver issue. Update your video driver.
Or turn down the video driver hardware acceleration. Right-click an
empty area of the desktop, choose the Settings tab, choose the Advanced
button.
The location of this differs in different versions of Windows.
Win2000: go to Troubleshooting, and turn down the slider for hardware
acceleration.
Win98: I think it's on another tab.
Mark
ilan wrote:
>
> Delayed response of when moving objects in diagram and panel, happend
> in LV 6, only for vi's compiled from previous versions. any
> suggestions?
>
> When I using the mouse to select portion of the diagram or the panel,
> or when I moving objects- I found that in all the vi's that I compiled
> from former versions of labview- there is a delay
of close to a second
> to the actual selection or movement of the item. This happens in 2
> machines out of 5 that I tested it, and it happened both in windows
> 2000 and in windows 98. any suggestions?

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

When going on to iphoto and click on anything i get the curser turning to a spinning colour wheel and this goes on fo ages

When going on to iphoto and click on anything i get the curser turning to a spinning colour wheel and this goes on fo ages

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

TThat's the problem. I've tried to delete the current icloud account but in order to that you need to put in the old password which I don't have so it kicks me out.

TS1383 the battery on my ipod is out of power and i have plugged it into the adapter and the charging screen is not on and in fact there is nothing but a blan unlit screen any thoughts

the battery on my ipod is out of power and i have plugged in the power adapter and there is no screen message in fact the screen is unlit and blank any thoughts

I assume knowing shows on the display at all? How long have you left it to charge? It can take up to 30 minutes for the iPod to show any signs of life and even then it sometimes still requires a hard reset of the iPod to get it to boot up.
Otherwise, tr a reset. To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

How to create an iBOT which contains more than one dashboard page

Hi,
I want to create an iBOT which delivers the content in HTML or PDF format, but to contain more than one dashboard page. The idea is that I have several dashboards and I want to send by e-mail (by iBOT) most important pages from different dashboards.
Is it possible to send by a single e-mail different pages from different dashboards? I cannot find an way to accomplish this in the content of delivery in iBOT.
Thank you.

Hi,
Yes, I can add them to a briefing book, but the clients that will receive it by e-mail should have the briefing book reader in order to view the contents. Is there any way to send the briefing book in a PDF format?
Thank you.

How do I post a recurring problem with a report that isw more than 500 characters

Why does FFx 8.0.1 initiate a XP restart? i.e.
This is a repeat of my 1st test!! While not at the PC (12/15/11 late evening) version 8.0.x is automatically upgrading Firefox 6.0.2.. Shut down PC, restart 12/16/11 today. Run the test again using the URL below possibly a typical problem site. Select Yamax SW200 from this page. Wait about a minute plus and XP reboots etc.
http://www.pedometersusa.com/view-all-pedometers.html?gclid=CKGJl9Kp3KwCFcya7Qodomb6qw
so I run IE version 6.0.2900.55112.xpsp.0804313-2111 and use the same URL. IE sat ar this tab for more than 25 MINUTEs and THERE WAS NO Problem i.e. XP did not reboot or Blue Screen.
----------- end of repeat test of 12/16/11 -----------

If the file has to contain the images, then the file has to bear whatever weight the images contribute. The only way to get to 50K is to have the total weight of the images come in below that. If the label images are just text then you should see what you can do to draw them up as vectors in Flash. But I doubt the larger images are going to be able to be optimized down far enough to meet the spec while retaining the kind of clarity you want, especially if the 640x480 needs to be expanded to a larger full screen size.

Create pagination for table contain more than 2 PK

Guys;
Is there any way to use the wizard for creating FORM PAGINATION for tables having more than 2 PK??
Regards;

Hi dimitri;
after the user login & start using this form thiswhat should happen to these 3 PKs:
-1st PK will be a unique number for the questions.
-2nd PK should be the ID for each survey ( created as global variable in Zero Page ).
-3rd PK will be the division for this user (also created as a global variable in ZERO PAGE)..so this is the only field which will nt be changed while the user is logged..
i tried to use the 1st 2 PKs...& set the last one to get a default value..it worked in the begining but gave me the 1st record for each Survey but my problem that i couldnt navigate to the 2nd record..& after that once i log out & relogin it willnt give me anything.
Regards;
ehammad

Possibility to eliminate creative design suites CS4, 5. 5.5 and to have only cs6 on the computer

I have creative suite cs4, 5, 5.5 and 6. I want to know if I can eliminate from the computer the programs cs 4, 5 and 5.5 and have only the Creative Desing cs6. I have the discs for CS4 and the other suites I buy it to download from the net. Thanks for answers

Thank you. I unistall CS4 and when I try to use Photoshop Cs6 I was told to install again because some things were missing. I have Cs6 from the net . To unstall Cs 6 again its enough to have the serial number and download a trial? I am affrraid to lost Cs6.

Itunes freezes on my mac mini?? its okay for the first few minutes then freezes. i just then get the colour wheel and have to 'force close'

hi there, i have major problems with itunes freezing on my mac Mini, its okay for the first minute or two then it freezes and i get the spinning colour wheel and i have to force close.
can anyone help?

I suspect that you'll have to mount that volume at boot time and not at login time as you're doing now. If you can arrange that, then the volume should be available to all users.
Unfortunately, there doesn't seem to be an easy way to do a boot-time mount. I tried searching for "mount drive startup mac" (without the quotes), but most of the results described how to mount a volume at login time. Ignore any advice that mentions "Login Items".
I did find this discussion, but it's very sketchy. You also have to be careful that any advice you find applies to the version of OS X that you're using.

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.

What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?

I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?

John R M wrote:
Thank you. I believe Apple shoud give you the option as to whether or not you may want to use the arrows.
Apple give users what they want?
Good luck there, the head of iOS Scott Forstall was canned, I suspect this was his favorite picture.
However I bring salvation and sanity, the option to go back to the wonderous Snow Kitty.
How to revert your Mac to Snow Leopard
How to erase and install Snow Leopard 10.6
Be sure to vent to Apple for the stupid changes here
https://www.apple.com/feedback/macosx.html

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. Any suggestion?

Similar Messages

Maybe you are looking for