Hi, I've got no music or videos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks
Hi, I'm unable to see if I have any music/videos/photos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform when transfering music/videos to the ipad. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks
23 GB of other indicates a corrupt file(s). A restore should resolve.
Similar Messages
-
Ever since I upgraded because of iOS7 on my iPhone, now my iTunes no longer can connect to the internet and my Home Sharing has been cut. Is anyone else having these issues? I tried the "DNS Flush" trick but itunes still won't budge.
Yes, after updating to iTunes 11.1.0,126 no Internet was available any longer on WLAN nor LAN interfaces (Windows 8 64bit version). WLAN interface still has connection to the router (on low level) but on higher protocol level no connectivity exist).
There exist a thread for Windows 7 from 2010 with the same issue describing how to solve the problem.
https://discussions.apple.com/message/12622179#12622179
Just follow the procedure, hence go to the "device manager", look for neworkadaper and de-install LAN and WLAN drivers. Reboot the PC/Laptop and Windows will install the driver(s) again and at the same time repair the mess produced by Apple.
This issue occured only on one of our family Laptop but not on a 2nd. Laptob nor PC. -
I would like to know how to retrieve them so i do not have to purchase them again.
call the APPLE store, even though it reconize you purchase them already, APPLE will charge you again. it happened to me. when u call them they can resend them to your phone FREE of charge. It makes no sense, i mean they know you already purchase them, then y dont they just allow us to redownload them free of charge.SMDH
-
After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i dohold down the option key during boot it give you the option of what parition you wish to boot into
-
hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?
Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program -
I cant see the control f menu or the bottom of web pages unless I "restore down" to a smaller window size.
The problem is when you maximize the window -- it is even bigger than the area available? Or the problem is that normal windows are always too large and have to be resized manually?
-
I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?
YOU can't fix it. But you can bring it in to Apple for an out of warranty replacement for $199.
-
I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back. Can anyone help?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
My itunes screen is black and i cant see the writing how do i change the colour
My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing
With that one, perhaps try Drgoo's suggestion from the following post:
Re: Itunes Store - ALL Text Black/Cant See Anything -
i made music purchases in indian store from 6months and now i see all my music purchases are removed from my purchases and i am not able to find them any more except few recent purchases.. i invested lot of money now i see all are lost.. what can i do?
Have you failed to maintain a backup copy of your content?
-
Changes the file name now cant see in imovies
I did an import from my hd camera to imovies - looked fine
In finder I went and changed the folder names of the events (just realised I should not have done this!)
I cant see the video/events in imovies anymore!
can anyone help!Can you remember the old names you used?
-
I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support
Yes.
Just call your provider and tell them what you want and they will help you get it done properly. -
Cant see the native groups on the forms and reports
We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
We did the migration for test environment, but didnt encounter this issue.
For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
We brought over the schema, migrate and register the applications, but the problem still persists.
Has any one encountered issue like this, I would, I would really appreciate any suggestions.
thanksThanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
Any idea would be highly appreciated.
thanks -
Cant see the hp printer icon in the my computer box below the icons of the drives c and d
cant see the hp printer icon in the my computer box below the icons of the drives c and d
Hi Sukanto,
Welcome! I didn't think this was something you see there anyway, I could be wrong. What operating system to you have?
Can you see the printer icon in control panel? Let me know if you need help to answer these questions.
Cheers,
KidA
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Maybe you are looking for
-
Can't open/place files in other programs
I can't open or place Illustrator files in InDesign or Photoshop, and vice verse, unless I save them as pdf's first. I'm pretty sure I used to be able to open and place any file in any program without making them pdf's. Any ideas?
-
Problem with commons-fileupload library.
Hello, I'm using the following code to try and upload files to my Tomcat server from HTTP clients. The code is inside a JSP page. When I submit the form to this jsp page, I get no errors but the file is not being uploaded and the only out.println sta
-
Discount from Vendor back to the WBS
hi Experts, Need a quick advise on a issue please : We have a vendor payment terms 2%/10 day's on 30 day's net, the issue is my client wants is to assign the cost benefit to the project where the Po was orgionally initiated from, we can assign the ca
-
Attachments with Sendmail?
Hello all, I'm working on a second release of a large webapp and one of the RFEs is to send HTML reports by email. I currently use a class which envokes Sendmail to send the message, but I don't know how to make Sendmail send attachments. Does anyone
-
Webdialer - Dial from a webpage (other than directory.asp)
Has anyone created something to make this work? Was it difficult? Are there any 3rd party apps that work good?