Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logic Pro 8, any advise? can I install my Logic 8 in the 10.6.8 OS? Thanks

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logi Pro 8, I can install the libraries but not the program, is it possible to install or do I have to up-grade to Logic 9? Thanks

It's either that Logic 8 is looking for the Rosetta emulation program or that Logic 8 was previously installed on this OS, in which case you will have to remove some preference files and install receipt.
I think the Rosetta emulation is downloadable for SL.

Similar Messages

I have several Files created in Logic Audio for windows bfreo v 5 wich can't open in Logic Pro X. Any ideas for a solution to his problem,

I have several Files created in Logic Audio for windows before v5.5.1 which can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK. I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
Swingtones

If you can open the windows files in windows you can bounce the tracks out as audio. Then load them in X

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

After Installing Logic Pro X, my Logic Pro 9's 32-bit AUs don't work. The 32-bit bridge doesn't open and run either in my Logic pro 9. My 32-bit AU plugins are crossed out. Help?

michaelvee wrote:
As an overworked professional, I simply have to consider the very viable options out there. Never thought I'd be seriously considering a Cubase product.
It's a Steinberg product, not a Cubase product.. in case you haven't been paying attention Steinberg developed the virtual instrument for use in it's programs way back in Cubase 3.55.. the plethora of virtual instruments and the advent of low-latency drivers can be directly traced to Steinberg/Cubase development.. Logic also borrowed Cubase's arrange page format back in the 1980's. Cubase has borrowed from Logic to be sure but Steinberg has long been an innovator for many of the things we take for granted today. It was Logic/Emagic who licensed the VST technology and ASIO low latency format to use in Logic 4.xx. It was Apple who adapted VST to it's own AU format. Also, Cubase and Nuendo have undergone a lot more innovation over the past three years, Yamaha has been good as a parent company. Cubase is not Nuendo's little brother by the way, they are very close, same exact audio engine, same robustness, they can exchange files, the only difference being Cubase doesn't have some of the high end post features that Nuendo has. I use both Cubase and Logic and occasionally Nuendo at the University here.. I know both programs fairly well, believe me, both Cubase 6 and 7 can hold their own with any DAW out there, they just don't come with a bunch of ready made loops and preset instruments.
LogicX will never be able to use 32-bit instruments without a third party solution, nor will it ever include the Bridge. At least according to the people I know.

If I buy Logic pro, how many computers can I install it on?

if I buy Logic pro, how many computers can I install it on? will the spp-store let me download again if get new computer?

The license agreement for the DVD version of Logic is different... and only allows for you to install it on two computers (Specifically one desktop and one laptop) In additiont you are supposed to only actually run Logic on one of them at a time and not both at the same time...
So in your instance, you should, according to your license agreement, remove Logic from your older Macbook in order to install it on your new MacBook Pro....
However, if I were you, I would contact Apple to confirm this as there is some discussion as to if this license agreement is still in force or if Logic, once it is updated via the App Store Update routines in Mountain Lion, then is covered by the App Store agreement which allows unlimited installs of Logic Pro on any computer you own...
It's a very grey area... and there is nothing stopping you from installing Logic on all three Macs except for that license agreement as the physical check that used to be present in Logic Pro, to prevent you using it on more than one Mac at a time, was removed a while back... so read into that, what you will.
Again, to be absolutely sure, legally speaking, contact Apple and ask them for guidance... (and if possible get it in writing from them, if they give you the go ahead to install and use Logic Pro on a third computer)

HT4812 I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

If I go through the setup that you suggested, won't I screw up the existing software on my system?
No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.)

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

ITunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this?

iTunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this? You used to be able to swipe and delete a song straight from your phone but I can't seem to do that anymore.

That is stealing.

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

Have Logic Pro 9.0.2, can't open OR update in Mavericks.

Like the topic says, I bought the Academic version of Logic Pro 9 about 2 years ago when I was in college. I never saw any update options for it in the Software Update program, so I have been running 9.0.2 for a long time. I installed OSX Mavericks today (was previously on Snow Leopard), and I can no longer open Logic Pro. I downloaded both the 9.1.7 and 9.1.8 updates, and neither of them will run because "An eligible Logic Pro version was not found in the Applications folder." Is there any hope for me, or do I have to take the plunge and buy Logic X?

I only have the one copy of Logic on my drive. The name of my Logic app after the Mavericks upgrade was "Logic Pro 9.0.2".
I tried installing the Logic Pro 9.1.7 update originally with this name but with no success, then I tried by renaming the app "Logic Pro 9" as adviced by The Art of Sound above and again it didn't work. I then tried again by renaming the app just "Logic Pro" as Majors89 suggested but still no luck.
The message I keep getting is "An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher."
Everytime I rename the app the picture changes to just a folder icon which can be opened and all the package contents seen, but when it's just named Logic Pro 9.0.2 as it was after the upgrade it has the regular logo but with a cross out.

Logic Pro 9.0.0 can't open GarageBand 6.0.4 files

As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.

queequeg731 wrote:
As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.
If you upgraded Logic to the latest version (9.1.4) you might be able to open them, in fact I think you can. Garageband is a subset of Logic, so the message you're seeing in Logic is correct.
pancenter-

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logic Pro 8, any advise? can I install my Logic 8 in the 10.6.8 OS? Thanks

Similar Messages

Maybe you are looking for