Hi i want to add three reports so pls provide the solution

Hi Friends,
Actually iam having three reports so the requirement is i want to execute those three reports under one click ie... when iam executing first one the remaing two also wants to execute under that one only\
So pls provide the solution and at the same time logic also
Thanks & Regards
Mohan Reddy

Hello,
Create a new report eg ZTEST.
Put in following sample code
the sample code is.
submit <prog-name> with parameter1 = val1
with parameter = val2......and so on
Use the above statement 3 times and execute it.
All 3 reports will be executed 1 by 1 without user intervention.
Hope this helps,
Rajat

Similar Messages

I want to implement three level Horizental navigation on the top navigation and menu items are created based on the data available in a SharePoint List.

Hi All,
I want to implement three level Horizental navigation on the top navigation and menu items are created based on the data available in a SharePoint List.
Implement this requirement through customization, how can i start any help
Thanks

Hello,
You can follow these links to get the result that you want. You can get the desired result either using the custom list or a site map. Please make sure when you edit the master page, dont work on the original v4.master. Always make a a copy and then work
on it.
This link will show you how get that navigation using a list.
http://www.bitsofsharepoint.com/BlogPoint/Lists/Posts/Post.aspx?ID=60
This link will show you how get that navigation using a sitemap.
http://www.sharepointdiary.com/2012/01/custom-top-navigation-using-sitemap.html
Please mark as "Answered" if this helped you.
Thanks,
norasampang

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing. Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
- use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
- create three submenus and use the speeches as menu music. Here's a (random) video on creating submenus:
http://www.youtube.com/watch?v=DlhQSb_D5kc
John

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

Hi i want to add firefox 22.0 beta6 to the windows8 iso so that it installs as i install windows8 how can i do this?

i want such a solution whare it wont prompt me for anything when i install windows8 with firefox

hello austinpinto, you can run the installer with the command line argument '''-ms''' in order to run it silently: https://wiki.mozilla.org/Installer:Command_Line_Arguments
how this can be integrated into a windows install disk probably goes beyond the capacities of the firefox support forums here though. you'd probably be better of consulting a forum specialising in windows or software deployment...

In CMC Manage- Add- Crystal reports option is missing

Hi: I want to import a .rpt via CMC. I understand that I am supposed to navigate to a folder and Manage -> Add -> Crystal Report
In my case the only options are ProgramFile and LocalDocument.
Does someone know why? Is it because, CrystalReports designer is not installed?
...thanks, Stan

If you select "Local Document" and then select the .rpt file you want to publish, it will know that this is a Crystal Report and give you a couple of options for that. It will then be added to the system correctly.
-Dell

How to add three signals in multisim to make a resultant

Hello,
I want to add three signals say of 1)60hz 2V 2)3hz 20mv 4)DC of 4V to get a resultant.
Can someone help me with this.
Thanks in Advance.

Connect voltage sources in series.
Lynn

Want to add more than 16 key fields in the DSO?

Dear All,
All the 16 Key fields are being used in my DSO,i want to add two more key fields in the same DSO.
Can any one provide the way how to go ahead
Regards,
Sarasu

Hi,
You can create a maximum of 16 key fields. If you have more key fields, you can merge (concatenate) fields into one key field using a routine.
Hope it Helps...
Regards,
SVS

Hi i want to execute 3 reports at one click without user interaction

hi Friends,
Hi i want to execute 3 reports with one click ie by putting radio button when we click on this this wants to execute all 3 reports with out user interaction pls try to understand and provide the solution pls
Thanks & Regards
Mohan Reddy

Hello,
To achieve this you can use the SUBMIT command after an user action.
Example
The program report1 has a stand-alone selection screen with the screen number 1100. In the program report2, an internal table with row type RSPARAMS and a ranges table are filled for this selection screen. These are transferred at SUBMIT together with a single condition.
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards.

I want to create three graphs in web template

dear all
I want to create three graphs in web template
the graphs's type is lines
top 1 and worst 3 will display in graph
first is seven days data
second is seven weeks data
last is six months data
how to create those
pls give me some advice
thanks

Lemine,
Basically you have two major steps:
1.you need to create the corresponding queries (with conditions on the key figures) in the Query Designer.
2. Open the Web Application designer and create three charts, set their properties, then drag them to the template , and finally link them to the corresponding queries/views.
More information on WAD can be found at: http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/content.htm
Hope it helps,
Xibi

I want to add an icon mozilla firefox to my desktop

I tried uninstalling mozilla firefox and unable to do so via control panel under programs. What do I do?

Yes. You want to add photos from a folder on the desktop to an existing iWeb album page? Just bring up the page in iWeb and drag the photo into the group of thumbnails that are displayed on the page and move it to where you want it locate
OT

I want to add an album to iWeb from a folder on my desktop but I do not want to first add it to iPhoto, is there a way I can add a photo to iWeb without it being from iPhoto?

I want to add an album to iWeb from a folder on my desktop but I do not want to first add it to iPhoto, is there a way I can add a photo to iWeb without it being from iPhoto?

Yes. You want to add photos from a folder on the desktop to an existing iWeb album page? Just bring up the page in iWeb and drag the photo into the group of thumbnails that are displayed on the page and move it to where you want it locate
OT

Where is the iTunes 'Books' library? Want to add pdf to iBook app

I have been looking for over an hour... there is nothing on my computer screen for iTunes that says 'Books' - I want to bring a pdf book into iBooks. How can I do this. Previously answered questions on this say to drag the pdf to the 'Books' library which would be fine if it existed. Off to the left of my screen I see only "Movies, Music, TV Shows and Apps" then Store and then Purchased and then my iPad which is plugged in.
Can someone help me solve this issue I have every time I want to add a book to iTunes to the iBook app on my iPad, I have already gone to File > Add to Library and it acts like something happened but there is no PDF book showing up in iBooks or my Adobe Acrobat app. What am I doing wrong?
TIA,
Ken

I found the app and put it on the dock and added the pdf but in iTunes it wants me to do a dangerous action, removing all music tones,,, and a long list of other things, like books that don't show up in this new iBook app on my Mac, I don't want to risk losing all of my PDF books and other books that are now on my iPad. Things get sticky and I've already lost tons of stuff by upgrading to Maverick in the first place. I think the warning message was enough motivation for me to forget about iBook and use another more friendly app like iAnnotate to bring in PDF files. Whew, well at least I know that there are apps out there that can be more friendly than the Apple apps., like I've abandoned 'Notes' and am now using Evernote which keeps backups in the cloud which updates to all of my divices. Thanks sberman, you did lead me to the correct answer on this. I'm just not going to chance losing everything.

Pls provide coding for executing 3 reports at one click

Hi Friends,
Iam getting one issue ie... iam having 3 reports so now i want to run all the 3 reports i want to execute one ie.. by clicking Run i want to execute all the three reports at a time and i want to print the o/p in one file on desktop
So pls provide the coding for this
Thanks & Regards
Mohan Reddy

Hi,
Run those three reports one by one just for determining time delay between those execution starts.
Consider delays are 2 Sec and 3 Sec
i.e 1. between report A and report B,
2. between report B and report C.
Now delay execution start of the report A by
3 Sec using 'WAIT' statement and report B by
1 Sec using the same statement.
Try this.
Regards,
R.Nagarajan.

Hi i want to add three reports so pls provide the solution

Similar Messages

Maybe you are looking for