Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks
Having several windows appear ...
Hi,
You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
Now the VI front panel will appear then you use it as a sub VI.
/Thomas
Similar Messages
-
Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?
Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!
-
<p><strong>When I click on the ondemand subreport or a drilldown, I want the content to appear in the same tab that is in the main report itself. How to make this work? As of now it opens up a new tab for drilldown or ondemand subreport? How to make this work? I want any expert here to throw some light on this?</strong></p><p>Plz mail me at [email protected] </p>
I fixed this problem. It was pretty easy.
First, in the address bar, type in " about:config " .
When it asks if you are sure about making changes & it may void the warranty, click "yes--I promise I'll be careful" or something along those lines. (I heard there is no warranty, & it's just a joke)
Once you get to the new screen, find " browser.link.open_newwindow "
You will see the # 3 on the same line. Change that value to 1.
Wah-la! :)
http://kb.mozillazine.org/Editing_configuration
http://kb.mozillazine.org/Browser.link.open_newwindow -
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
-
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
When we run $CRS_HOME/root.sh scripts-This hangs for a very long time
Hi,
At the time of oracle cluster ware installation, when we run $CRS_HOME/root.sh scripts…
bash-3.00# /export/home/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d1s1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
This hangs for a very long time; I controlled out of it and re-run it. The same result, it stops at the last line for hours now. Any idea?
Thanks
ANup
Edited by: user485641 on २५ अप्रैल, २००९ ७:०५ अपराह्नwhat os ? what Oracle version?
What you find on cluster log.... ? -
when i run installation itunes,i see this massage "there is a problem with this windows installer package.a program required for this install to complete could not be run. contact your support personnel or package vendor."please help me for installation itunes on my pc completely.
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
when I start ffox I want the same 2 tabs to open EVERY time no matter what sites I have visited in previos session - can I achieve this
In the home page setting you need to use a pipe (|) symbol as separator.
See [[How to set the home page]]
You can also create or modify a Firefox desktop shortcut and add the two URLs to the target field of that shortcut.
In that case you need to separate the URLs with a space.
"C:\Program Files\Mozilla Firefox\firefox.exe" http://site1.com http://site2.com -
When I try to post a comment on an article I just read, my post stays in the box w/out posting. And when I want to click thumbs up or down in the comment section in these articles, the number stays the same. Also, my Skype has stopped functioning.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
Why would I get different sized exe's if I build the same source code and target the same RT target?
Hi Bob P (Dr. RT) et al,
This is driving me nuts! I have a VI that uses different amount of memory depending on which machine I use to do the build.
I use the same build file and the same source.
It is targeted at the same cFP2000.
FP version is the same.
LV version is the same.
If I build it from the one machine, there is enough memory available to target the RT platform, show the front panel and do a "show RT engine info".
If I try this from the other machine, the cFP crashes, starts flashing the "status light" and latter on the crash dump file indicate "insuffiecient memory to complete this operation".
The OS on the two machines are both XP. O
ne is a laptop (the one that works) the other is a tower.
Are there any LV ini file settings that could be hitting me?
My customer is seeing the same issue, so it not just me.
Any clues?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under constructionHi Bob,
Few questions:
1)Ftp to your target. Are the exes the same size on disk?
No
2)Build the exes on the hosts. Are they the same size on disk?
I will have to look at this.
3)Can you determine whether the exes consume the same amount of memory when loaded on the hosts?
They will not run on the host because they use inport/output (to control serial port handshake lines).
4)Does your application call any dlls via an NI driver or custom-built?
THey use the "Settime.dll. At build time the builder says the target OS has its own version of this (and FP).
I'm doubtful that any LV ini settings are causing this behavior. If I had to take a guess, it could be related to dll versioning. Do the hosts have identical versions of *all*
drivers/dlls called by your app?"
Can you give me a suggestion on how verify this.
I have double checked LV (6.1) and FP.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.
What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.
-
If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
ThanksSorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/
-
How do I delete duplicate songs in my iTunes? I have hundreds and I don't want to delete them one by one. They were all added on the same date, so sorting by the date won't help.
Hi, if this is in regards to your library simply open up itunes and do the following steps:
Click File
Scroll down to "show duplicates"
A list will then appear of your duplicate song titles.
Be sure to CAREFULLY review each song to make sure it is a duplicate ( as I have some music that is the same song but live, acoustic etc...)
Proceed to manually delete each song from the list and leave alone any song that you wish to keep.
Best of luck,
Cait -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Hi Team-
we are getting below alert in Exchange 2013 on UM server
a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
eventID 1647
The Microsoft Exchange Unified Messaging Call Router service rejected the call for the following reason: 15505;source="Exchange 2013 server ";reason="Couldn't find a valid Unified Messaging server to redirect the call." Microsoft.Exchange.UM.UMCore.CallRejectedException:
An incoming call with ID for user was rejected because a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
we have exchange 2010 and Exchange 2013.
Sender of the voice mail is on the Exchange 2013 and receiver of the voice mail is on Exchange 2010
Is this not supported scenario of Exchange 2013 UM server and Exchange 2010 mailbox server
ksrugiYou cannot and should not expect Exchange 2013 UM function for mailboxes housed in Exchange 2010. And the reverse is true as well. If you want Exchange 2013 UM to function for users, their mailboxes need to be in Exchange 2013. Exchange
2013 UM should be able to redirect calls to an Exchange 2010 UM server if it detected a call was destined for a mailbox being hosted by Exchange 2010, assuming the UM servers/roles/services are within the same UM Dial Plan.
Maybe you are looking for
-
My experiences & solutions to new overheating iMac
I know there are many threads concerning these overheating problem with some new aluminum iMacs but it's kind of hard to decide which one to post my experience to so I'm just posting a new thread. This is not a question because I think I fixed the pr
-
Error in printing via printMode="ActiveX"
Post Author: maj CA Forum: General Hi all am trying to print a report form the Crystal Report Viewer ( Web Application ), then i receved this error message after i chose the printer Server Error---- An error occurred on the server. Printing will be
-
Scheduling in BusinessObjectsEnterprise4.0 SP2
We are testing scheduling in BusinessObjectsEnterprise4.0 SP2 , the Instance manager history shows reports are run successfully . I am try to send the crystal reports/webi reports in PDF format to specific email id's. Please let me know if any additi
-
Hi Today i have recieved one months full bill after having two different faults this month one was for a few days complete loss of service the second was no broadband and partial tv service because my router broke. I can't remember the exact dates im
-
Change item order in Muse CC Quick info widget
Hi, haven´t figured out yet how to change the items order from the Muse CC "Quick Info" widget. When I have f.i. 5 items how do I insert one at position 2. When I click f.i. the "+" at position 2 the new item will regardless be at position #6 (at the