Hi . I want to download apps like Instagram , snapcI think for all of these apps you have to be at least 12 and I am . However when I go to the App Store the install button is grey so I can't download them. Plz tell me how to solve this

Hi I want to download Instagram and snapchat on my  IPod touch . I think for these apps you need to be at least 12 to download them. I am . However when I go to the App Store to download them . It won't let me . The install button is grey so therefore when I click it nothing happens. Please can somebody tell me how to sought this problem out allowing me to download the apps. As this is getting really annoying now .

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

Similar Messages

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • I think Barry Hemphill said he could SELECTIVELY delete SEVERAL iPad browser history entries at once. I can,t find his email. Someone plz tell me how or fwd this to Barry. Thnx

    I think Barry Hemphill said he could SELECTIVELY delete SEVERAL iPad browser history entries at once. I can,t find his email. Someone plz tell me how or fwd this to Barry. Thnx

    Hello milkisoo,
    Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused. 
    As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment.  However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear.  This is the case for your one charge of $1,051.69.
    It also sounds like an error may have occurred when you initially attempted to place your order,  resulting in one of your gift cards not registering properly and the order not being completed.  Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
    Thank you for posting.
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • TS1538 I have updated both my Itune and Ipad mini , however, when I click on the device icon (beside itune store), it disappear. Why does this happen?

    I have updated both my Itune and Ipad mini , however, when I click on the device icon (beside itune store), it disappear. Why does this happen?

    I'm not sure why this would happen. But I think I did see another post a week or two ago about this. Have you tried rebooting your computer and resetting your iPad.
    To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I erased all the contacts, apple ID and icloud account in my old 4s and gave it to someone. However, whatever contact that someone has saved in my old 4s phone has added in my new 5sphone. Does anyone know how to solve this?

    I erased all the contacts, apple ID and icloud account in my old 4s and gave it to someone. However, whatever contact that someone has saved in my old 4s phone has added in my new 5s phone. Those are not my contact and I don't want them in my new phone. Does anyone know how to solve this problem?

    Ln the old iPhone, -> What to do before selling or giving away your iPhone, iPad, or iPod touch

  • TS4009 I had an advice to upgrade 5 apps i already have on my ipad. I clicked to upgrade them all, but they are all in "waiting" and jammed.could someone tell me how to solve this problem iI have since i downloaded iclous

    I had an advice to upgrade 5 apps i already have in my ipad.
    I clicked to upgrade them alltogether but they all jammed.
    Each icon shows  "in waiting" since I installed Icloud, I have this kind of problems.
    Hope someone can help me.
    thanks.
    Paul

    ok,
    At this little tutorial here:
    http://www.developer.com/tech/article.php/610011
    It says
    "The Document interface is the content model for Swing text components. Every Swing text component has an instance of Document associated with it. The Document contains both the content for its component as well as any style information for the rendering of the content. All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet. We'll get into AttributeSets in the next article, when we discuss styled text components. "
    Mainly concentrating on :
    All content is stored in the Document's Element array. Style information is stored in each Element as an AttributeSet.
    This would indicate that each time a new attribute is applied to something that it is stored as a separate String in an array, along with the attribute relating to it, would it ?
    I've looked here:
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JTextPane.html#getParagraphAttributes()
    And here :
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/text/Document.html
    But still cannot figure out a way to do this, I presume I must get at the Document 'array', and if I had this everything would be fine.
    Should I run through every single charactor in the 'editable' JTextPane, check its attribute and add it my my own special made class?, and pass this class to 'non-editable / viewable-only' JTextPane ?
    Any opinions would be very helpful.

  • In my Itunes account, I can not see my list of songs in my files, nor can I look for individual songs in the Itunes store. Basically, anywhere there are list, I can not see them. What can I do to fix this problem?

    I am having trouble with my Itunes account on Windows XP . I can not see any list in my music files. The songs are there but I have to click on each song to see what it is. Also, in the itunes store, I can not see any pull down list or use my search bar. This happened when Itunes updated it's look. I can pull it up on my phone and see all of my purchased music. I would really appreciate knowing how to fix this problem. Thank you.
    Traci Lemley

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • My 1st gen ipod touch has N/A in the WI-FI option can anyone tell me how to solve this issue please.

    My 1st gen ipod touch has N/A in the option menu for wireless, can anyone help solve this issue please???

    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Can anyone tell me how to solve this problem I have just come across today when trying to add a contact on my Blackberry Pearl 9105...

    I tried adding a number to my phonebook this morning and my phone froze, I had to take the battery out to unfreeze it
    and when I retried it came up with an error message but I can't remember what exactly it said.
    I have since noticed that I cannot even edit current contacts in my phonebook
    Pllllleeeeease can someone help me????
    Thanks
    Debi
    Solved!
    Go to Solution.

    Hello,
    The exact and complete error message is critical to helping you...there are something like 10,000 possibilities, it'll be so much faster if you provide the exact and complete error message. If you can re-create it, then do so and provide that message.
    Thanks.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iphone 4s cannot be turned on after updated to ios 7. can anyone tell me how to solve this

    my iphone cannot be turned on after a week i updated it to ios 7. I have tried many solution to turned it on but none of them works. Now it only appear the apple logo on my screen since 5 hours ago. Can anyone suggest me the best solution

    Hello Anis Squared,
    I would be concerned too if my iPhone was not powering on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My ipod classic will not play any of my sounds on it...can anyone tell me how to solve this problem?

    hi i am looking for help..i recently added new music to my ipod but it does not play them at all, i can press everything and nothing is stuck but it just wont start to play. i have checked the music volume to see if that was the problem but the sound is good ...i need help!

    So after the song has started, does the progress/scrubber bar move forward at all letting you know many seconds you are into the song? 
    Do the other songs you had previously synced to the device still play okay?
    Do these newly downloaded tracks play alright in iTunes?
    B-rock

  • When I try to download apps it says error 1004 and it goes away. Please tell me how to solve this problem.

    I tried to download an app and it went to download and then it said error 1004 please try again. It does this every time I try to download any app. I really want apps. Please help!

    Try to go to Settings and then Store. Tap to your Apple ID and select View Apple ID. Now choose to check your payment information and when you're done tap Done. I had to rewrite my three digit code of the credit card and now it works.
    Oh, I also activated Genius for Apps but I don't think it makes any difference.

  • Can Anybody Tell me  how to solve this Error (related OCCI)

    following Errors are Coming While Running...
    Programmmm
    int main()
    nvironment *env = Environment :: createEnvironment();
         cout << "Environment is creating" << endl;
    Connection *conn = env->createConnection( "test", "test" ,"10.116.64.98:1521/ORCL");
    cout << "Connecting to the database" << endl;     
    env->terminateConnection(conn);
    Environment::terminateEnvironment(env);
    return 1;
    Enviroment is Creating but not connecting to the Database.....
    my database Client is 10G
    VC++ 2005...
    I downloaded .dll and .lib files from below link
    http://www.oracle.com/technology/tech/oci/occi/occidownloads.html
    but same thing is working in VC++2003... But not in 2005..... Error is given below
    ERROR
    'sanju.exe': Loaded 'C:\WINNT\system32\mmdrv.dll', No symbols loaded.
    'sanju.exe': Unloaded 'C:\WINNT\system32\mmdrv.dll'
    First-chance exception at 0x7c59bc81 in sanju.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fc34..
    First-chance exception at 0x7c59bc81 in sanju.exe: Microsoft C++ exception: [rethrow] at memory location 0x00000000..
    Unhandled exception at 0x7c59bc81 in sanju.exe: Microsoft C++ exception: oracle::occi::SQLException at memory location 0x0012fc34..
    The program '[1676] sanju.exe: Native' has exited with code -1073741510 (0xc000013a).
    can anybody help me plzzzzzzzzzz...
    cheers ,
    sanju
    }

    AFAIK, you can't mix and match vs2003 and vs2005 compiled libraries. I don't think 10g supports vs2005.
    11g does offer OCCI import libs (.lib) specifically for use with vs2005 in oci/lib/msvc/vc8.
    That's what I'm using successfully. 11g on Windows was recently released officially, give it a try for real vs2005 support. --DD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • HT201412 My home button does not respond on my iPad 3.  Any ideas on how to solve this problem?

    I just received a new iPad 3.  The home button does not respond.  Any ideas?

    return it to have it checked for malfunction. Might be a transport defect . ( Although I never heard of such a severe case on brandnew Apple Hardware )

  • I am using iphone 4s i have a problem with facetime, fecetime always showing connecting but not connected? can u please tell me how to solve this problem

    Please help me

    Hi Vamshi Madhadi!
    Try using the steps in this article to help you troubleshoot this issue with FaceTime:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for

  • Database table problem

    hi expert, I have one expert routine with insert command in it. While DTP are running I change the status request to green, but after that I run again and the system can not insert record to database table. I wait for along time and system can perfor

  • Popup focus problem

    Hi, I have an application such that when a specific button is pressed a modal JDialog is opened. When I switch through the windows using alt + tab (I'm using Windows XP) only the jdialog window is shown (not the frame that opened it). How can I show

  • Unable to connect iphone to laptop

    After updating to itunes 11.1, my iphone 5 has been unable to connect to my laptop through the USB cable. When I plug it in, a sound plays as if connected, but nothing shows up in either itunes or my computer. Before updating to itunes 11.1, my iphon

  • Insert workflow for a particular Business requirement

    Hi, We have a requirement wherein we do not have SSHR and people are assigned to enter the absences of the employees. But still we need an approval from manager. As per my understanding, we will have to create a new workflow and the same should be ca

  • Unable to open BEx Analyzer 7.1

    Hi Friends I have installed sap NW 2004s Release          -->  710 Final Release File Version     --> 7100.1.0.1027 When i try to open analyzer the message i get is "A critical program error occured. The program has to close. Please refer to the trac