Hi, I would like to ask if someone has worked with Beha Unitest Telaris instruments. It's RS232 instrument, bu
t they have give us only their one software. I would like to do serial communication thru the Labview. I have problem, I can see that 30bytes are being sent by the instrument(COM-Spy), but in the Labview in can see only one byt at serial port. Please help.Information about interface; IR/RS232, 9600baud rate, 1start bit, 1stop bit, pair parity, 8 data bits.
Full name of the instrument; Beha Unitest Telaris ISO plus.
The communication is one-way, I must push the button 'Send' on the instrument to get data to PC.
When the instrument isn't powered, thru the cable I get '00'(hexa).
I've tryed to change pauses or timeout, but nothing helps.
Thanks for any a
nswer.
t they have give us only their one software. I would like to do serial communication thru the Labview. I have problem, I can see that 30bytes are being sent by the instrument(COM-Spy), but in the Labview in can see only one byt at serial port. Please help.Hi,
Are you using the VISA VIs?. From your description itr seems that you are just trying to read 30 Bytes. That should be pretty simple.
Do you get any error messages?. If you open hyperterminal, are you able to get the 30 bytes of data?
DiegoF
National instruments.
Similar Messages
-
Hello I would like to ask if someone knows how can I found my stolen iphone?
Hello I would like to ask if someone knows how can I found my stolen iphone?
The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored. -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
HI ,We would like to ask you to help us with the following problem
We would like to ask you to help us with the following problem. As usual we tried to post unmatched received advance payment which is subject to output VAT via transaction SM35. Normally we post the payment to account 501020 (Advances Received from Operating Activities), we generate output VAT by clicking on u201CSimulate Taxu201D. Then we simulate the document and four lines are automatically generated (please see the attached scan of such document posted recently):
40 510000 (Trade Receivables - Receive from Bank)
19 501020 (Advances Received from Operating Activities)
50 400000 (Output Tax (Sales Tax Payable))
40 405033 (Customer Advances VAT)
However when we tried to post it today it is not possible and an error message u201CTax clearing account 405033 may not have open item managementu201D appears u2013 please see the scanned printscreen. This did not happen in the past.
We would appreciate if you could solve it as soon as possible as we still need to post it to period 12.Hello
You execute the t/code FS00 for G/l 405033 and go the control tab select tick in open item mgt under act mgt in co.code.
Regards
Avijit -
I have the iPhone 4S and would like to purchase a docking device. I have the Otter Box Camo case and would like to know which dock will work with the
case ON. Thank you.it might be better to contact otterbox to find out from them what they made it compatible with.
-
I would like to know if labview can works with hp82335b interface
I would like to know if labview can works with hp82335b interface for instruments data aquisitions
Hi,
on following link: http://ftp.agilent.com/pub/mpusup/pc/old/hp_over.html
they say:
"The 82335 will not work under National Instruments Labview in any way, shape, or form. In general, it will not work on any product that doesn't specify that it does work.
There are no plans for any improvements to this product and no engineering resources on it."
In case this is true, you will go into trouble with
your card using LabVIEW.
Regards
wha -
hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number for tech but everytime I call it hangs up and says to chat........ ive been doing that all day yesterday its kinda getting old telling the same thing over n over again so I would like some real live help a number I can call or someone can call me 402 802 1211 everytime I try to do something on this it ask for my serial num I put it in and it says invalid number and when I do my pics it has trail across them
Hi,
I'm sorry to hear that you are having problems but this is a user to user forum and only occasionally visited by Adobe staff. Depending on your version of Photoshop elements, you may be able to get help through the chat sessions starting here
https://helpx.adobe.com/uk/contact.html?promoid=KLXNA
If you give us details like your operating system, Photoshop elements version and the problem you ae having, someone may well be able to help you.
Brian -
I would like to ask where can I find a battery replacement here in the Philippines. My battery is included in the defective battery of Iphone5 that they sold. I am currently locked in with Globe service. I tried to call them but they insisted that I should call apple store. Kindly help me. Thank you
You could try sites such as this to find what is available; maybe
someone at a contact can suggest other directions to try...
https://locate.apple.com/country
•Apple - Philippines: sales, service, training certification
https://locate.apple.com/ph/en/
Perhaps there are independent Apple authorized service providers
who may be able to handle any Apple vetted replacement + service.
Good luck & happy computing! -
I would like to speak to a representative, I have changed my phone and would like to speak to someone without hunting for my serial number.
Hunting for it?
It's under Settings > General > About.
Any Apple Support advisor is going to ask for that information if you need support with your device.
If it's just your Apple ID/iCloud account, they might not need that. -
Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?
Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone
-
Hi ,
I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen
"This ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad"
I did authorized in the store, but still did not transfer to the mac. Could you please to tell me what should I do it? Please let me know that as soon as possible.
Regards,
Thank youThe iPad is fine. But the computer you're syncing with needs to be authorised with the Apple ID that was used to buy the material on the iPad. You do this by picking the 'Authorize' item from the menu in iTunes and entering the account name and password.
-
0 down vote favorite
I would like to ask the following question. I am using mac os x 10.9 maverics me quicktime player version 10.3. Can I trim a video recording without having to press the pause or save it as a file? Or can I add a new recording to a video file? Thanks in advanceWell,
I tried the "Internet Recovery" option and finally saw Mac OS X Mountain Lion's install page but after waiting 7 hours when I just thought its going to start installing, I got another progress bar with 36 hours remining time to download "Additional Components" then after progressing 2-3 hours, it shows "Unable to write installation something..., Contact Apple Care"
Then I accidently rebooted the machine and now it seems Internet Recovery don't work anymore, it shows "support.apple.com - 40 something!" error, and finally when I tried to reboot using Recovery HD, I found it's gone as-well!
To be honest, I don't know what to do now, I am and dissapointed... also I do not have any Apple Store nearby, there is an authorized country reseller almost 650/km far away from my residents and they even charges too high (like $250) for doing such repairs (as per phone conversation)
If anyone have any idea or anything to help me with, please do share- I'd be eternally grateful! -
I would like to ask how to retrieve Sever/Host IP address.
Hello,
I would like to ask how to retrieve Sever/Host IP address.
sys_context('USERENV', 'IP_ADDRESS') returns client's IP address only, but what I want to acquire is Host/Server IP address
Thank youThis is why it is generally useful to mention the version of Oracle you are using, particularly if you are using a version 4 releases old...
That said, you can probably still use the UTL_INADDR package
SQL> select utl_inaddr.get_host_name( null ) from dual;
UTL_INADDR.GET_HOST_NAME(NULL)
DDBCJC01
SQL> select utl_inaddr.get_host_address( null ) from dual;
UTL_INADDR.GET_HOST_ADDRESS(NULL)
192.168.1.107Justin
Edited by: Justin Cave on Sep 29, 2008 10:54 PM -
I would like to ask whether anyone knows of any true explanation for why the iPhone 5 starts at $199 in the US and £529 in the UK? That is more than a £400 discrepancy...
iPhones are duty free and even with a $50 shipping fee it would only come to £185.75 including VAT at the current exchange rate.How much a month is the standard 24month contract with AT&T or one of the other American providers that makes the handset cost $199?
Here's the cheapest plans available from the big three:
The plans start there and can run up to $230/mo (for AT&T). -
hello there, this is really urgent i would like to ask if there is a way to deactivate/lock my Mini Ipad because it was stolen, i hope you can provide me a way to do so, thank you for the support and i really hop you can help me, i bought this mini ipad not too long ago.
Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating and/or remotely wiping it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you haven't already done so then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model you should also contact your carrier.
Maybe you are looking for
-
Hi all, We have an issue in our production environment. There is an abap program that opens an excel file (located at user's desktop) and insert the information from it into a z table. It works fine, but on 3 new production servers it does not work (
-
Sending images through Javamail
Hi all, i hv come across one problem with javamail. i sending some files through javamail which might contain images. i hv send the images by using content_ids for the images. but the problem is that if the image path is absolute then only it works f
-
Package assigned to wrong transport layer
I've changed transport routes in my system from 2 to 3 systems landscape. unfortunately somehow a package(development class) was assinged to the wrong transport layer & as a result when users release their request its taken to Local Change Request i
-
Print CD on Epson R320 CD Tray not working
Hello, Has anyone been able to print to CD's on Epson r320 when I try to print to the CD tray, I get an error message saying the CD tray is open and the job is automatically stopped. I found the new printer drivers for Intel machines on Epson's site
-
When I execute my applet, it gives me this error: Exception in thread "main" java.lang.NoSuchMethodError: main However when it runs in the appletviewer fine. Heres the code: import java.applet.Applet; import java.awt.*; import javax.swing.*; public c