Hi, im in aple bloop, im trying to recover but it has block code and show me the error 3194. Help please

Hi, my iphone 4 has an apple bloop, i'd try to recover but the iphone has block code and there is no way to put my code.
Please helpme to force recover.

I suspect this phone was "hacked" to unlock it so it could be used where you live. That's why you're getting the 1015 error. iTunes has detected a mismatch between your baseband and iOS, thus preventing your phone from being restored and generating that error code. Use Google for instructions on how to fix error 1015, as support for hacked iPhones cannot be provided here, per this forum's terms of use.

Similar Messages

When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

My iTunes is refusing to work with any device I attach to my computer: iPod, iPad and iPhone. I've tried everything recommended to me by Apple, but nothing has worked, not even several uninstallments of iTunes. Help please!!

All my computer says is that it reconises that there's a iPod there but that it can't use it for some reason.
All of the solutions offered have not worked. I just want to be able to use my iTunes properly again.

Hello, Beckara.
Thank you for visiting Apple Support Communities.
I would need some clarification on the issue you are experiencing to better assist you. However, if your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If iTunes becomes unresponsive when connecting a device, try the troubleshooting steps in the article below.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Cheers,
Jason H.

HT201210 I was backing up my iPad and it gave me an error and ever since my iPad is dead. It shows the iTunes icon on the screen with an image of a USB pointing to the iTunes image. I have tried to restore but it isn't working. I have the iPad 2. Please h

Hi, I was backing up my iPad 2 and it gave me an error message. Since then, my iPad has been dead or should I say, STUCK. The screen shows the iTunes image with an image of a USB cable under it with an arrow pointing towards the iTunes icon. I haven't been able to get it to unfreeze and when I connect it to iTunes, iTunes doesn't give me the option to Sync or Restore. It actually just goes into the iTunes Store section and I can't access the part I need. Please help! Thank You!!!!!

You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Hi, just bought an Idjay system and I can't get it to work with any of the following: I tried iphone 4s but it has IOS7 so the phone is not recognising when I am plugging the system in I have tried ITouchs,phones

I have bought a Idjay system and I have the App on the 4S phone however the phone is not aknowledging the system. After googling we found that their is an issue with IOS7 for this system. So we tried an Itouch, its on IOS6 but doesnt work. Then tried an Ipad but the first version. Thought we had success when the Ipad seen the system connect to it. However I then went to download the App onto the Ipad but it needs IOS6 onwards and as its the first model of the Ipad the latest version is 5.1.1 so I cant download the App...
Any suggestions? do you know how to get the 4S phone to work with it as that would be the ideal scenario?
Thanks in advance

They said that there shouldn't be any reason for it not to work. I bought it off ebay and the previous owner used it on the same devices that I am

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

I am getting an error message when trying to burn pictures to a dvd rw, and it says the disc can't communicate with the drive?

I am trying to burn some wedding pictures to a blank dvd rw. I keep getting an error message that says the drive and the disc can't communicate. I have run a repair disc and repair disc permissions, restarted my laptop, and still get the error. What else can I do?

Hi sheryl525,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801#
Cheers,
- Judy

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

Hi wmcknigh,
Welcome to Apple Support Communities.
The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
If you don't see your family's shared content - Apple Support
Cheers,
-Jason

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!

Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!

I should have added to my posting (instead of using this "reply" - it is the server passwork it is asking for and I have never known that I had one and assumed it was the passwork I always used for this type of thing.

Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

Or contact Adobe Customer Service via http://helpx.adobe.com/contact.html?product=export-pdf

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I'm trying to install iTunes on my pc and i get the error message "Service Apple Mobile Device Failed to Start. Verify you have sufficient privileges to start system services

I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start. Verify you have sufficient privileges to start system services.
What do I need to do to get iTunes to install?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Hi, im in aple bloop, im trying to recover but it has block code and show me the error 3194. Help please

Similar Messages

Maybe you are looking for