Hi im in uk and have i pad. on internet i have 3 networks to choose to connect to. first is my bt homehub second is bt wifi third is bt wifi with fon, my problem is when im at home it connects me to home hub no prob but when im on the move what do i have
Hi. I have i pad. I have 3 choices of connection for internet. btwifi, bt wifi with fon and my home hub. Home hub is fine but how do i get internet on the movbe cause when i try to connect to bt wifi outside my house i get the message i have no connection. Ive got the bt wifi app and it works fine. can anybody help me with my wifi so i can use it whilst away from home
Just login to get started, and the BT Wi-fi app will automatically connect you to the UK’s largest wi-fi network whenever you're in range . **IMPORTANT: TO ACCESS BT WI-FI YOU MUST USE YOUR BT ID, @BTINTERNET.COM OR @BTCONNECT.COM EMAIL ADDRESS. THIS WAS SENT TO YOU IN YOUR ORDER CONFIRMATION EMAIL*
Please go through the Description once mentioned by the App developer in the iTunes store link : https://itunes.apple.com/gb/app/bt-wi-fi/id384404559?mt=8
Similar Messages
-
modem firmware 04.12.09
iPhone 4
memory is 32 g
iso 7.1.2(11d257)
when cancel call it not work before is shutdown and open it again
i have big problem i make update to my software iso 7.12 in my iphone 4 but when i recive calling and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i doBasic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.
You should check that the Project settings match the clip settings before editing them to the Timeline.
Only newly created Projects will change not existing ones by adjusting the Project settings.
If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
Al -
my iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem i went to optus to see if they could help me as my phone is through them but they knew nothing i need help please my phone is only 8 months old
Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.
-
when I start up numbers an old version 2.3 fires up but when I go to update its say I have the latest version
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
I am considering installing the latest version of OSX Mountain Lion but am concerned by the number of users that have had severe problems. Has Apple sorted this out?
As I told you, you have to do some steps before upgrading to OS X Mountain Lion.
First of all, make a backup of your files using Time Machine and/or Carbon Copy Cloner. If you make both, good, but if you only make one, it's OK, too.
OS X Lion and OS X Mountain Lion aren't compatible with PowerPC applications, so you have to check if your applications are compatible > http://www.roaringapps.com If you have to update an application, do it before upgrading, because the Mountain Lion installer moves unsupported applications to a separate folder.
After doing that, open Disk Utility, select "Macintosh HD" in the sidebar and repair permissions. Then, verify the disk to check if it's OK. If everything is right, just open the App Store and purchase OS X Mountain Lion -
I have downloaded a movie off iTunes and when I tried to press play it said"cannot open" I have received an email of my purchase but cannot watch the movie ,what do I do ?
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
-
i was up dateing my itunes and now on my ipod touch screen its says itunes and a picture of the lead what do i have to do
Having finally managed to update itunes to the current version in order to sort the lock screen of itunes ;logo and usb lead, i find that i dont have on the left side of itunes lists, the DEVICES heading for me to click on in order to back up/restore etc..... How do i access this..? I seem to be going around in circles and getting nowhere fast.
Is there any logical reason why the "devices" catogory wouldnt be showing..? or is there any way i can proceed manually without access to this...? HELP..... PLEASE.. THANKS...... -
purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!
Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore). -
I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.
Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.
-
I have already downloaded wrath of the titans and watched it through but a download of the movie in the iTunes store still remains and also keeps timing out? This is preventing me from downloading any other movies onto my iPad any suggestions?
no, i had to leave so i logged out and when i opened itunes on my mac and went into the downloads tab it only had one paused download listed. i resumed the download for the one movie listed and the other one never showed up. its been about two weeks since i initially bought the two movies so i figured something was wrong.
-
hi my name is grace i have pre ordered now 85 when you couldn't download it directly now when you can download it and when i try to download it on every song it says purchased but when i look at my purchased song the album isn't there what can i do
Contact iTunes support. Only they can fix this.
-
Is there any difference between an unlocked Iphone sold in australia and the USA and if I bought one from the USA what would I have to do to use it.
An unlocked phone is an unlocked phone. It's sold without a SIM card. You have to get a SIM card from the carrier you want to use, with an account set up, insert the SIM and activate the phone in iTunes.
Unlocked phones sold by the USA online Apple store can only be shipped to a US address and paid for by a US credit card
The only difference between an officially unlocked iPhone sold in the US and Australia is the warranty. The warranty is valid only in the country of sale. If you buy the phone in the US and return to Australia, if it breaks you have to ship it to a US resident who will get it to Apple and return it to you. It can't be shipped direct in either direction. -
I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.
Hi ellafromva,
From your description, it sounds like you may have iTunes Match activated; you may find the following article helpful:
Apple Support: iTunes Match on iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5637
Regards,
- Brenden -
ihave an iphone 5 i buyit at miami apple store and it has a little crash on the screen and i want to take my iphone to the aplle store to get the 5s what do i have to do
You need to take your phone to an Apple Store in the US. You can purchase an Out of Warranty replacement if the phone is damaged. Cost is $269+ tax.
You cannot upgrade to a 5S at an Apple store; at best, you can turn in your current phone to get a gift card towards the purchase of another.
~Lyssa
Maybe you are looking for
-
Link title not displaying properly in fact sheet
Hi experts, I have an issue with fact sheet of BP here, the link titles, e.g. "Activities", "Account Billing Data", "Account Sales Data" etc are displaying like "BP_FACTSHEET0001", "BP_FACTSHEET0002"... I checked configuration in IMG CRM->UI Framewor
-
Keep iphone asleep when notifications arrive?
This is more of a feature request if it doesn't already exist. As you know, while the iphone is asleep, it wakes temporarily to display the notifications then goes back to sleep. The problem with this is, I'm to the point where I get tons of notifica
-
i kept a break point in a user exit with the statement BREAK-POINT. but the control is not stopping there , i am not testing it so didnt give it as user specific . what might be the mistake ? is it not the proper user exit , i have created a project
-
TS1398 How do I put my printer on my phone? I have a IPhone 4S
Iattempted to print but it would not take it. I looked for a printer and it stated that No AirPrinter Found. What do I do?
-
Hello, We have just installed Oracle VM from the 2.1.1 iso image and the install went fine but now when we try to ftp files to the server we get serious I/O errors starting with "SCSI offset overrun detected resetting bus". After this we get a bunch