Hi Im using OS Windows 7 Professional 32bit driver for apple ipad air in order to transfer photoes from ipad to hp laptop

Unable to transfer photoes from ipad to windows 7 laptop.
Error message
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

That is one heck of a post for a newcomer here. Your instructions worked like a charm, with one exception:
When uninstalling the Broadcom Device, I had to check the box to delete the driver, and then had to scan for new hardware to get the device to show back up. Then I was able to load the edited driver software.
I am not complaining, but very grateful, as I was pulling my hair out on this one.

Similar Messages

How do I transfer photos from ipad 2 to a flash drive

how do I transfer photos from iPad 2 to a flash drive?

You don't. There is the Camera Connection Kit, which let's you download pictures to your iPad via SD card, but the reverse is not a standard feature of iPad. The best method would be to connect your iPad to your computer and transfer the pictures to your computer via iTunes.

How do i transfer photos from ipad to a flash drive

how do i transfer photos from ipad 2 to flash drive

You can do it with a wireless flash drive. An ordinary flash drive will not work.

I'm trying to transfer photos from ipad to my lap top (windows) please help!!!

I want to transfer photos from my i pad onto my laptop (windows), so I can update the ipad software...when ii update it says there is problem with the back up and if I continue I will lose all contents, so want to transfer the photos before they are lost!!! Please help how do I do this - blonde and dumb!!!

Transfer photos from iPad to computer
http://support.apple.com/kb/HT4083

How can i Transfer Photos from iPad to an external hdd or USB drive?

Hey everyone,
Do you Know how to Transfer Files and especially Photos from the iPad to an external hdd or USB drive? I ll Be travelling for a Long Time and Wont take my MacBook with me, only the iPad, the Camera and an external hdd to Save Photos and Videos from the Camera. Thanks.
Best Wishes,
Nick

You can't - external drives and flash drives can't be connected to the iPad for copying photos (or anything else) off the iPad. You can use some photo upload sites to store them on web accounts or cloud services, but for a large number of photographs you'll be better off with a laptop and external drives for backup.

How can I transfer photos from my iPad 2 to my iPhone 5 using blue tooth or iCloud?

Hi All I need your support.
I e recently bought an iPhone 5 and would like to transfer photos from IPad 2 to IPhone 5 using Bluetooth or iCloud but I can not do it. Can you help on this?
On the other hand when I log in with my Id to apple support I receive a message that there are no products registered under my apple id, do you know how I can register?
Regards, I look forwards to hear from you.
Francisco Silva

How to use iTransfer
1. Launch iTransfer on both devices
2. Tap "Tap to Connect" on both devices
3. Select the device to pair and wait for device to connect
4. Tap "Accept" on the other device
5. Select Photos, Music or Files to transfer
6. Tap "Received File"
7. Select the received file and decide what action you'll like to take e.g. View, Email, Open In

Can I use TC as a backup drive for a Windows PC

I bought a TC. We still have one desktop PC. I am hoping to use TC as a backup drive for that PC in addition to its wireless capabilities. Can I do that? Or, do I have to have an external hard drive hooked up to TC that is used to backup the PC?
Thanks!

Does TC have to be formatted in some special way in order to have the PC write to the drive?
No, the TC is a network drive.. its internal format happens to be HFS+ and cannot be changed, but it would not matter if it was formatted to some strange standard you never heard of. It presents to the network as an SMB files store.. that just means it is like a shared drive on another computer.
I prefer to simply reinstall the operating system & have the data files to restore in case something happens. At least, in my limited experience and others' stories, that seems to be a simpler route.
I disagree here. A full backup of terrible mess sure, that is worse than a bad fresh install. But a clone of the PC on the day of creation.. that is a very special backup.. and I store them for every pc I setup. Fortunately very few these days.. To install the OS, drivers, updates (these take forever plus several registrations to MS), antivirus, security software, basic software like office, register everything, ring microsoft to convince them you are reinstalling because you had to wipe the pc and are not stealing the software. Discover that the PC has no original disks because the supplier loaded it onto a partition on the hard disk which is now dead. Load emails.. those are painful..remember all your account names, account info, all the passwords all the favourites.. that takes a few days.
When you get a new pc, an unused full install.. everything registered.. everything working as it should.. take a clone snapshot.. and protect it like crazy. That snapshot will have your pc back in working condition in under 1 hour. What is more it will be small.. a few gigabyte at most.. you can probably fit the whole thing on a 8GB usb stick. Lock that away in a draw.. it is precious.. my precious.. get it with a nice ring on the end.. !!
There is a full working pc with all your software, fully registered without more effort than starting the restore. All shrunk down to an $10 storage device.
You can do the same thing after say 1 year.. the backup might no longer fit on a nice disk but you can get hard disks for very cheap. It also represents a working volume, all the current passwords, all the current favourites and setups. After that things tend to go downhill.. files and registry bloats out and viruses get in.. etc. But at least the day of creation backup is so so worth it.
So, maybe I can still use the MS Backup process I've been using and write to the TC as an "external hard drive" location for the backup file?
It will work.. much more cannot be said.
Wishing you a Happy New Year - wherever in the world you might be!
Australia.. !!
But same back to you.. with knobs on!!

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
please help
saleem

Hello Saleem,
Welcome to the Forums
I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
HP Officejet 4610 All-in-One Printer Drivers
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.

To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC

Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
This question was solved.
View Solution.

Hi:
Try this Intel chipset driver...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
If the auto install file doesn't work, download and unzip the second file listed (zip file).
Go to the device manager and click on the smbus controller needing drivers, click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
Make sure the Include Subfolders box is checked and see if the driver installs that way.
For the mouse pointer problem try reinstalling the touchpad drivers.

I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng

Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03\3&11583659&1&FB
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C
PCI\VEN_8086&DEV_9CA2&CC_0C0500
PCI\VEN_8086&DEV_9CA2&CC_0C05
This question was solved.
View Solution.

Hi:
Download and install the Intel chipset driver from the link below.
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
The second file on the list is the auto install file.

HT201250 Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller ext

Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller external drive?

50maz wrote:
Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in
Yes, it will do a full backup.
and if so, do I really need all the old backups on my smaller external drive?
Only if you want to be able to go back in time to those previous Time Machine backups. When you plug in the new larger external drive, you will only be able to go back as far as the first day you plugged it in and ran the first Time Machine backup on it.

Hi Im using OS Windows 7 Professional 32bit driver for apple ipad air in order to transfer photoes from ipad to hp laptop

Similar Messages

Maybe you are looking for