Hi ... in forms 6i can i make the mouse scroll verticaly & horizontly??

when i navigate the form in runtime ,, ca i make the mouse scroll the page instead of pushing the left button on the scroll bar ??
can anyone help?
thanks in advance?

thank u for your answer,
may i ask u ,, can i found this option in 9i or 10g??
thanks in advance
bye

Similar Messages

Can I use the mouse scroll wheel for zooming the timeline?

Howdy...
As a recent convert from Vegas, one of the best features that I miss is using the mouse scroll wheel to zoom into and out of the timeline..
Anyone know a way I can set this up in FCP6?
Thanks...
-Ben

Yes.
(I know I'm gonna get flamed by the pros here who will advise NEVER to use third party plug-ins, but... I've been a heavy user of FCP for years and NEVER had any problem with this, so here goes:)
Install USB Overdrive, and program your mouse with:
- wheel_up to cmd+plus (=zoom in) and
- wheel_down to cmd+minus (=zoom out).
I actually use clickedwheelup and clickedwheeldown for this zooming in and out, keeping the plain vanilla wheel_up and wheel_down for, well, up and down (or clip_left and clip_right on the timeline).
Nice thing is, it then works in the Viewer and Canvas to zoom in and out, too.
HTH.

How can I make the Smooth Scrolling option in the Advanced menu apply ONLY to the tab bar?

So, I'm one of those people who usually have 60+ tabs open at any given time. I'm also on a Lenovo laptop with a trackpoint (that may be relevant later).
Right now, I have smooth scrolling disabled.
In previous versions of Firefox, if I sat my cursor on the tab bar and scrolled either up or down, it would scroll across my tab bar at a constant, quick rate, usually taking about two or three seconds to reach the end. This wasn't an animated scroll (I've disabled that animated scroll via about:config in the current Firefox version).
However, now, it's doing something different. There's acceleration to the scroll. If I just tap the scroll in either direction, it scrolls only a few tabs. However, if I hold the scroll for a second, it instantaneously takes me to the far end of the tab bar, completely skipping at least thirty tabs in between.
I have tab scroll buttons added by Tab Mix Plus (smooth scrolling is also not enabled in that addon), and the same accelerating behavior occurs there. One or two taps of the button moves the bar a few tabs to the left or right, but several taps in quick succession takes me all the way to the far end of the bar.
I can restore the old scrolling behavior for the tab bar by turning on smooth scrolling in the Options > Advanced menu, but that turns on smooth scrolling for web pages at the same time. I don't like the web page smooth scrolling, and would rather not have it on.
Or if there's any other way to make it so that scrolling the tab bar moves the tab bar a fixed amount no matter what, that would be great.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I make the mouse follow as I point?

I am brand new to captivate and incredibly frustrated. I'm
trying to record a web site walkthrough and have selected
"Demostration." No matter what setting I change, the mouse only
moves when I click, but I want to point to things as I narrate. Can
anyone help me understand how to make that happen?

Welcome to our community, murphisto
Captivate doesn't exactly work in this manner. Basically here
is how the process works. You open an application. You open
Captivate and configure it to record the application. There are
different ways to record. You elected Demonstration. When recording
in Demonstration mode, the following happens.
Where you click or type, Captivate captures the screen. The
screen capture becomes the background image for the slide. The
mouse coordinates are tracked. In other words, where it started and
where it stopped. So each slide has a single mouse movement. On the
first slide where mouse movement was recorded, you may adjust the
start and end spots. But each slide afterwards only offers you the
ability to adjust the mouse ending spot. The starting spot is
determined by where it STOPPED on the slide before.
You may wish to investigate using Full Motion Recording
(FMR). But if you choose to go that route, you need to be aware of
some factors. Captivate was never designed to be a Full Motion
product. It's better than it used to be, but far from perfect. If
you do record in full motion, keep it very brief. Just a few
minutes worth. If you find this method of recording and playback
are what you feel are best, you will find yourself constantly
frustrated with Captivate. In that case, you should investigate a
different product that was designed with full motion in mind.
Camtasia Studio, Fraps or one of the others.
Hopefully this was helpful... Rick

Can i make the timeline scroll along in real time?

as in the playhead remains in the middle and the tracks move past...
i thought you could but i can't find the option..
cheers
hugh

There is a simple (though not automatic) way to have the timeline scroll.
Put the cursor at the bottom of the timeline, in the bar area where you set the area to be viewed and use the scroll wheel of the mouse.
Also, some mice have the ability to control left/right window movement by pushing on the sides of the scroll wheel (e.g. the logitech mx series).
If Apple ever institutes this 'feature' I'd hope they set it as a toggle. There are many times when I do not want the timeline to move.
Cheers,
x

How can I make the page scroll when highlighting

I can only highlight to the bottom of the screen. Then I have to take that and paste it. Then I have to go back and highlight the rest and take it to be pasted.

hello missdeezy, when i try this the page is scrolling further automatically when i get towards/beyond the bottom of the page with the mouse pointer - alternatively scrolling with the mousewheel, the arrow-key & the page-up/down-key works during text selection.
in case this doesn't work for you, you may try to launch firefox in safe mode and see if you can replicate this behaviour there? if not, maybe an addon is interfering...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Can I make the check_box bigger?

The check_box looks like too small comparing to other objects in the form?
Can I make it bigger? I tried to change fond and size, it didn't work.
Thanks.

Dear Friend,
You can also do it by using an image item and handling everything manually as follows.
WHEN-IMAGE-PRESSED
if :BLOCK3.ITEM6 = 1 then
read_image_file('C:\a1.bmp','BMP','BLOCK3.IMG');
:BLOCK3.ITEM6 := 2;
else
read_image_file('C:\a.bmp','BMP','BLOCK3.IMG');
:BLOCK3.ITEM6 := 1;
end if;
Where item6 is a dummy item with null canvas and initial value set as 1, a.bmp & a1.bmp are the images box and box with a tick respectively. In this case you can customize the size of your check box but all the database processing of the check box must be handled manually.
Regards,
Senthil .A. Perumal.

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

I am frustrated with how my cursor jumps around while typing. How can I make the arrow follow the cursor so this doesn't happen?

Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How can I make the combo box turn to the value of black.

When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
     private JPanel buttonPanel;
     private DrawPanel myPanel;
     private JButton showButton;
     private JComboBox colorComboBox;
private boolean isShow;
     private int shape;
     private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                          Color.gray, Color.green, Color.lightGray, Color.magenta,
                          Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
     public test() {
     super("Draw Shapes");
     // creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
     // set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
     showButton.addActionListener(
          // anonymous inner class to handle showButton events
     new ActionListener() {
               // draw a black filled square shape after clicking showButton
     public void actionPerformed (ActionEvent event) {
                         // call DrawPanel method setShowStatus and pass an parameter
          // to decide if show the shape
     myPanel.setShowStatus(true);
               isShow = myPanel.getShowStatus();
                                        shape = DrawPanel.SQUARE;
                    // call DrawPanel method setShape to indicate shape to draw
                                        myPanel.setShape(shape);
                    // call DrawPanel method setFill to indicate to draw a filled shape
                                        myPanel.setFill(true);
                    // call DrawPanel method draw
                                        myPanel.draw();
                         myPanel.setFill(true);
                         myPanel.setForeground(Color.black);
               }// end anonymous inner class
     );// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
     // anonymous inner class to handle colorComboBox events
     new ItemListener() {
     // select shape's color
     public void itemStateChanged(ItemEvent event) {
     if(event.getStateChange() == ItemEvent.SELECTED)
     // call DrawPanel method setForeground
     // and pass an element value of colors array
     myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
     buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
     buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
     container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
     setVisible(true);
     public static void main(String args[]) {
     test application = new test();
     application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
     public final static int CIRCLE = 1, SQUARE = 2;
     private int shape;
     private boolean fill;
     private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
     // draw a specified shape
public void paintComponent (Graphics g){
          super.paintComponent(g);
          // find center
int x=(getSize().width-shapeSize)/2;
          int y=(getSize().height-shapeSize)/2;
          if (shape == CIRCLE) {
     if (fill == true){
     g.setColor(foreground);
          g.fillOval(x, y, shapeSize, shapeSize);
else{
               g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
          else if (shape == SQUARE){
     if (fill == true){
     g.setColor(foreground);
                    g.fillRect(x, y, shapeSize, shapeSize);
else{
                    g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
          showStatus = s;
     // return showstatus value
public boolean getShowStatus () {
          return showStatus;
     // set fill value
public void setFill(boolean isFill) {
          fill = isFill;
     // set shape value
public void setShape(int shapeToDraw) {
          shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
          shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
          foreground = newColor;
     // repaint DrawPanel
public void draw (){
          if(showStatus == true)
          repaint();

Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox.

Can we make the jobs invisible in SM37

Hi All,
Can we make the background jobs invisible in SM37.
If we run our current report in production, it will schedule around 1000 jobs in SM37.
My requirement is to make these 1000 jobs invisible....
<removed_by_moderator>
Read the "Rules of Engagement"
Thanks in advance
Tajuddeen
Edited by: Juan Reyes on Nov 27, 2008 10:00 PM

i think and extension can do..just before producing the report[program for SM37] output clear the table entries.
for this u need to change the standard code..
but haven't checked its possible or not.. i means exits available or not...
rather i would say.. copy SM37's program to a Z program.. do this requirement... create a tcode say ZSM37 for it..
then this ZSM37 can solve your purpose.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

How can I make the text bigger in iCal?

How can I make the text bigger in iCal? I've looked at Preferences and View.

Sorry, did not see that you are using 10.6.7

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

Hi ... in forms 6i can i make the mouse scroll verticaly & horizontly??

Similar Messages

Maybe you are looking for