Hi In my deployment machine most of the user will be xp so i copy this Prin

hi
In my deployment machine most of the user will be xp so i copy this PrintControl.dll in system32 folder and in run command i type regsvr32 PrintControl.dll it shows me successfully register your dll then on clicking print button in crystal report viewer it shows me print dialogue everything fine.
now my client changed his PC Operating system:-
He is using windows 7 64 bit version
Here I do two methods but both was not working:
First method: I copy my dll into syswow64 also in system32 folder then i register using cmd
c:\windows\syswow64 then it took me
c:\windows\syswow64: here i will enter
regsvr32 c:\windows\system32\printcontrol.dll
its says dll register successfully but printing dialogues not showing me.
Second Method:
I copy my dll into system32 folder then i register using cmd
c:\windows\system32 then it took me
c:\windows\system32: here i will enter
regsvr32 c:\windows\system32\printcontrol.dll
here it shows dll not found i already palced my dll in system32...
Whats the problem what i have to do.. to run my CR print dialogue in windows 7..
whats the right procedure to run print dialogue to be work in my windows 7 64 bit..?
Waiting for your soon Reply
Thanks

Hello,
Need more info:
What version of CR are you using? There is a possibility your version is not supported on Windows 7. Check the Platforms PDF's for more info.
AND NEVER copy anything to the \Windows\system folder. That breaks Windows Certification and if anyone else wants to install CR your copy will always take precedence over their control...
The PrintControll dll is in the crviewer CAB file. Open it with WinZip and then install it that way.
Don

Similar Messages

I recently bought and downloaded an album and most of the songs will only play half way then stop can i do anything about this?

i bought the album Attack! Attack! by Attack Attack and most of the songs will only play halfway then they will just go silent i have tried contacting apple about this but have found no real topic on their site to do with this problem and there seems to be no email address for support that i can find can an of you help me?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

I am having problems with my email sent folder. Most of the emails will not load. Todays and yesterdays emails will load.

I am having problems with my email sent folder. Most of the emails will not load. Todays and yesterdays emails will load.
Thanks
Zambam

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When i try to load pictures or to veiw them in another window, e.g. from ebay, or any site, the page will come up blank. why is this?

when i try to load pictures or to view them in another window, e.g. from ebay, or any site, the page will come up blank. why is this?

Some mail programs, including Apple Mail, can reduce the size of images that are attached to a message. It's happening at the sender's end, and all you can do is ask the sender for a larger image.

I have an iMAC from about 2007. The mouse will not scroll down. Can this be fixed?

I have an iMAC from about 2007. The mouse will not scroll down. Can this be fixed?

You have to remember, where the scroll ball is, there is a small gap which picks up dust and fluff. That detritus gets everywhere and in your case affects the downward scroll.
Adding just a touch Linc Davis's suggestion, after you have vigorously rubbed the scroll ball on the pad, tap it on a hard surface from time to time. Sometimes you will see small amounts of fluff appear. You should also see dirty marks on the pad.

Reports / intranet/ In some detail, the user will input a date range from and 2 and will out put the records in the int

Hello there,
I am totally green in web development.
my goal is to, for the user will input a date range from and
to and will out put the records in the intranet when they press a
button.
However, the good news is: I have experience in programming.
I have written applications for desktop in VB>NET and I
understand RDBMS /sql concepts .
But CF and WEB development is new to me.
My current projects involves in connecting to DB and testing
it. (it works fine)
And outputting reports by to a intranet page. (records)
i need help on how to start this asap. I will even do some
practice at home.
Tools I have at work
• Development server(test)
• Home site.
• Toad for db connection.
• Html reference guide
• Cf dummies book.
How can start my projects.
(ex. Create cf, outputpage?)
seriously, I am new to this.
Thanks.

Well, I had a really nice response with some concepts and
ideas for you to practise on etc, but these dumb forums timed out
and I lost it all
If you want to pop me an email we could probably do a few
exercises together that way - or even by MSN Messenger if you want.

CU50- Channges to the bom by the user will be ignored

Hi, while testing in CU50, After entering the config values, the above message "changes to the bom by the user will be ignored'. how to eliminate the message?

Hi,
In case u have action or procedure dependecies, which are causing a change in the Bom item qtys which were originally defined in Super BOM and are now changing through config values, u will get a message as u said.
As it is a message during simulation process, u can ignore this.
Regards
Venugopal

Track which reports are downloaded most by the users

I have Zcubes on which I have reports . Now I want to track which reports are downloaded most from the website and what reports are looked at most of time ? how is this possible?

Sany
You can get the information from St03. You need to go to BI Work Load . This will give you all the details related to the InfoProviders. This will give you the number of reports under each Cube executed by the users. But you need to enable the BI Stats to get this information.
Regards,
Mahesh

When my ipod nano 6th generation falls asleep or if the light dims the music will stop how can i fix this

i cant get this to stop i have reseted it and everything. i have the 6th generation ipod nano and when i press the little sleep button so i wont press any buttons it turns off or when it dims the light the music will stop i dont know why please help

Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i

I can't update/downloads an app from app store by using by iphone 4s. The icon will change to blank keep waiting, this problem was trouble me for 1 week. pls help me.I try all the method (reset/change date setting)no help my network is ok.

I can not update/download an app from app store by using my iphone 4s. I try every method by re-setting date/time and reboot the phone etc.NO Help.
The icon will change to blank keep waiting & can not go in & use in. Anyone have solution for this. pls help me...tks

.local indicates local activity by the computer host Williams-macbook-pro.local=hostname@domain . The UID of 501 is the standard UID of a local computer administrator.
Copy and paste this little script in your terminal:
if [ "SSH_CONNECTION ]; then
echo I am remote
else
echo I am local
fi
A return of "i am local" ensures there is no remote connection to your machine (through SSH).
In the future, to avoid remote entry, I would recommend not posting your IP address though.

I'm trying to log into a public network and while the fan blade shows I have a connection I can not get the user agreement to load in Safari. This was working until yesterday, what changed?

I've reset my network settings. I've cleared cache and cookies in the browser. Before yesterday the login screen would appear anytime I attempted to use an app or program that required internet access. Pretty much every program. Now I have a brick tablet at work. I've reset everything I can find. I'm at a dead end.
I've seen other ipads that had the auto login togle and auto join togle under network selection, my ipad does not have those options. Logging in at home is working fine on my private network. This public network is not being reset or forgotten when I choose "forget network" or Safari is blocking the login page and I don't know how to un block it.

Well, when I join a public wifi, a log in page displays a few seconds later, displaying the user agreement. But, earlier today, I was trying to connect my friend's 3GS to a public wifi, and it did not show up. So. I don't really know what happen. I think you should toggle the auto Join to on.

Every time I download a PDF I get a message that says There was a RAISE without a handler. The application will now close. What does this mean?

I work on a Power Mac G5 running OSX 10.5.8.
We recently had to upgrade Java.
Now every time I download a PDF I get the message "There was a RAISE without a handler. The application will now close."
I downloads the PDF OK, but then Safari closes and I have to start it back up to get to my email.
What is the message telling me? It did not do this before we upgraded Java.

I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It.

HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan Jackson

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

Cannot get mail message keeps me from using a mail account. Yes I don not remember the password that I used of the user name. How can I reset this?

I don not remember the passwd or the user name for an email account. how do I reset this account?

OK, hubby figured this out for me. Apple support were nice people but could not get the answer. Network Solutions online info was incorrect or incomplete. I do not remember exactly. However, the email that Network sent was EXACT. No info as to password reset but they gave the correct port numbers and .....Connection!

Restricting the user to only one session. Is this possible ?

We have a web enabled Forms6i application running on Unix AIX server. user logs on to this application through a application logon screen.
We have a requirement where we have to restrict user from logging on more than once to the application.
- We thought of implementing this functionality through a database field which get set and resets each time a user logs on and logs off the application. Issue here is when do u reset the field. ? Is there a trigger on form which fires no matter how user exits from the system , including PC crahs ?
- is there a better way of handling this functionality.
Any help will be appreciated.
Thanks,
Gana

Try to use Oracle profiles
create profile test limit
sessions_per_user 1;
then assign this profile to the users you want them to have one session only. Moreoever, you have to change the parameter LIMIT_RESOURCES=TRUE in the init.ora parameter file.
After changing the parameter file, shutdwon the database and open it again to let the profiles take effect on the user session.
Good luck

Hi In my deployment machine most of the user will be xp so i copy this Prin

Similar Messages

Maybe you are looking for