Hi, in my iphone4s i'm not able findings multi-media option in message settings

hi, in my iphone4s i'm not able findings multi-media option in message settings & camera icon in text messaging, please give me solution for this problem ?

Thanks for the reply.Sorry but, that is only my problem is when I goto settings< messaging&lt;then there I find only 3 options( show preview, character count, play alert tone ) I find only these option with coressponding on/off button slider for them, &amp; no where in settings I find 'mms messaging on' option, can u please suggest me now what to do?

Similar Messages

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

    Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

    You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
    The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

  • I am not able to execute the transport.send(message)

    I am not able to execute the transport.send(message) when trying for sending mail. I am getting error like this : -
    javax.mail.SendFailedException: Sending failed;  nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 10.175.80.50, port: 25;  nested exception is: java.net.ConnectException: Connection timed out: connect
    Please help me on this to resolve this issue asap. thanks

    Hi Vinod,
    public void SendMail( )
        //@@begin SendMail()
              // Specify the host name of the mail server
              String host ="----
              IWDMessageManager messageMgr = wdControllerAPI.getComponent().getMessageManager();
              // Initialize Session
              Properties props = System.getProperties();
              props.put("mail.smtp.host", host);
              props.put("mail.smtp.auth", "true");
              Authenticator auth = new Auth();
              Session session = Session.getInstance(props, auth);
              // Create new MimeMessage
              MimeMessage message = new MimeMessage(session);          
              try
                    // Set the From Address
                    String from = wdContext.currentContextElement().getCtx_From();
                   message.setFrom(new InternetAddress(from));
                   //  Set the To Address
                   String to = wdContext.currentContextElement().getCtx_To();     
                   Address ar[] = new Address[1];
                   ar[0] = new InternetAddress(to);
                   message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
                   // Set the Subject
                   message.setSubject(wdContext.currentContextElement().getCtx_Subject());
                   //  Set the Text               
                   message.setText(wdContext.currentContextElement().getCtx_Text());            
                   Transport tr = session.getTransport("smtp");
                   tr.connect("Put again here Host Name", Port Noumber, "userid", "password");               
                   tr.sendMessage(message, ar);
              }catch (AuthenticationFailedException e){
                   messageMgr.reportException(e.toString(),false);
              }catch (AddressException e)     {
                   messageMgr.reportException(e.toString(),false);
              } catch (MessagingException e) {
                   messageMgr.reportException(e.toString(),false);
              }catch (Exception e){
                   messageMgr.reportException(e.toString(),false);
        //@@end
    And also create the class Auth() like
    public class Auth extends Authenticator {
         public PasswordAuthentication getPasswordAuthentication()
              String username = "userID";
              String password = "Passwod";     
              return new PasswordAuthentication(username,password);     
    Please check it i think i will work. Also please use constant value for the to, from, subject and text.

  • Not able to table control option in edit in layout

    HI,
    I am designing a screen with table control wizard ,but i am not able to see the option of table control wizard in edit.
    Message was edited by:
            nandulamatam Bharath
    Message was edited by:
            nandulamatam Bharath

    Hi
    Install the correct and latest patch of SAP GUI for this problem
    take the help of a BASIS person in this regard , he will install the same
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Im not able to find bootcamp option in startup disk

    im not able to find bootcamp option in startup disk.
    my mac keyboard is also not working so i cannot use the option key during the restart.

    What events led to this state?

  • Not able to find the options in Visual Composer studio

    I am having Visual Composer role in Portal.
    While I entered in Visual Composer studio, I am not able to see any option :
    Browse, Compose, Configure, Inspect, Find Data, Deploy at the right pane of the window.
    Can anyone help.
    Edited by: Maitrali  Marik on Apr 22, 2009 6:43 PM

    Hi,
    have you installed the adobe svg viewer on your computer ?
    if not, you have to do this, you can find it on :
    www.adobe.com/svg/viewer/install/
    Fabien.

  • HT4053 I have downloaded iOS 7 on my I pad but am not able to activate Face Time nor message. Please help!

    I have upgraded to iOS7 on my I pad wi fi+ cellular but am not able to activate Face Time and message. The error message I get says "Please check your internet connection". Please help!

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • HT4623 My I-Phone 4 does not have the Software Update option under my settings?  Where do I go now?

    My I-Phone 4 does not have the Software Update option under my settings?  Where do I go now?

    Try actually reading the article you linked from. Especially the section on updating using iTunes...

  • Since the upgrade on io6 on my iPad 3 n iphone4 I'm not able to do any face time with my family in India from Uk using Wifi, they keep trying me from india but it says connection lost and when I try it rings but there is no ring on their end.

    Since I updated both my apple products to Io6 I'm not able to do any face time over wifi with my family in india from the UK. My family in india had io5 in their iPad 2  and it was working perfectly fine until the io6 was installed . Can you please let me know if this is a common issue with io6. Thanks

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Not able to see the Service Desk Message in "Solution_Manager"

    Hi Gurus,
    Can anyone help me solving my problem,
    We are using Solution Manager 4.0, and want to implement service desk for our systems. I have configured the solution manager service desk and we are able to rise the message from satellite system to solution manager, but i am not able to see those messages in "solution_manager" transaction under service desk in solman, but those messages are reflecting in transaction code "dnotifwl" under "No Processer assigned" option of Personal selection>Notifications Tab.
    Pease guide me to resolve the problem.
    Thanks,
    Krishna.J

    Hi Nico Effenberger ,
    Thanks for ur reply,
    1.have not copied slfn to zslf but modified the entries of slf1 and using directly. When i try to copy either it is copying only the entries or saying Entry zslf does not exists in DNOC_TYPE_NOTIF.
    2. I am having full authorisation sap_all, and sap_new for my system
    3. yes i have created a slfn based on this slf1 messages.
    It will be very helpfull if you could send me any doc related to solman service desk configuration you have done.
    thanks & regards
    Krishna Joish

  • OAF page is not able to display the custom error messages

    Hi,
    I have extended a seeded CO and trying to throw few custom error messages.
    It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
    Is there any profile option which enables the custom messages?
    Thanks,
    Ranita

    Hi,
    There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
    use the following syntax for writing a msg in Jdeveloper
    pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
    and enable the following profile option to yes
    Fnd:Diagnostics
    Regards
    Chanu

  • Inbound document not able to created from an outbound message EDI

    Dear all,
    Our inbound delivery was not able to create automatically during GI for an outbound delivery. Our inbound delivery is created via an EDI output type in the header of the outbound delivery as soon as the GI is posted.
    All along, all the inbound docs are able to generate. However, for this particular outbound document, which has already GI, does not trigger the inbound document creation, and I notice that the output type message having a red light status in the message output.
    When I checked the error processing log on this output message type (i.e. the red status), error message said
    No goods receiving point for the combination of plant 1120 and stor.loc.
    Message no. VL377
    Diagnosis
    No goods receiving point could be found for plant 1120 and storage location  for the inbound delivery item. The delivery should still take place for the goods receiving point .
    System Response
    The system does not permit creation of and/or changes to the inbound delivery item.
    Procedure for System Administration
    Check your settings in Customizing for Determining the goods receiving point.
    The funny thing is I check the SPRO setup (i.e. Assign Goods Receiving Points for Inbound Deliveries), and I notice that the goods receipt point has been assigned and configured. Further, other Delivery Order which is having the same data, does not generate such error in the  message output, and the inbound is able to create.
    WHy?
    thanks.
    Edited by: tuffy on May 12, 2011 12:04 PM

    Hi Sudhir,
    This is a production thus, I don't want to save the inbound delivery, but it seem no problem of creating it, I will have the business create it.
    So, how do i debug the idoc?
    at first how do I find the idoc number of the failed transaction as when i go to the output message (i.e. in DO header) and check the processing log, system said..
    Object 0082658402 (i.e. DO number)
    output type: Stk Transfe Crte Deliv
    Processing log for program /spe/sto_id_processing
    no goods receiving point for the combination of plant 1120 and stor loc
    no inbound delivery create for the replenishment order
    There is IDOC no for this faild message (though GI is incurs)?
    thanks.

  • Not able to see Explore option in SAP Lumira Cloud

    Hi,
    I have shared a dataset in SAP Lumira cloud but I am not able to get the Explore option for that dataset. I can see only Share, Info and delete options there. Can anyone please provide the solution to get Explore option?
    Thanks and Regards,
    Bhagyashri

    Thanks.
    But that is for vertical/horizontal orientation.
    I want following kind of things.
    Please provide solution for it.

  • TAfter IOS5 updating I am not able to open media files from embebed in email atachments. Previous to update email System of offered the opción to open trough any media player I had installed, any clue?....

    After IOS5 updating I am not able to open movie files embebed as email atachments. Previous to update email System offered  the option to open the file trough any media player (app)  I had installed , now it tríes to open the file directly with no success, any clue?....

        Hi Rohit ,
    I had copied these .class & .xml files under Myclasses -> oracle.apps.icx and oracle.apps.po and oracle.apps.fnd was same which comes part of the standard OA tutorial.
    I copied same under Myprojects as well.
    you have to decompile the class file into java file and then place it in Myproject directory , also copy all dependency files like BC4J components , and then
    try to run from Jdeveloper .
    Alternatively you can get the entire ICX folder and zip it and add it via library .
    --Keerthi

Maybe you are looking for