Hi, info on controller and garageband
Hi to everyone ;-)
please, can you help me?
i would control my garageband with a Zoom r16 as audio interface and controller (8 fader, play, stop, rec...ecc..ecc...).
can i make it?
How?
thanks and bye
The Zoom r16 uses Mackie emulation mode when used as a control surface, something Garageband does not support. So on paper, the answer should be no.
However, if you have one, you might want to plug it in and try it out. Sometimes things do seem to work with GB even though they shouldn't.
However, GB has a kind of purposely funny protocol for use with control surfaces (perhaps to motivate people to upgrade to Logic if they wish to use any one of a number of standard control surfaces, as some have speculated).
One control surface made specifically for GB was M-Audio's iControl, although it's no longer made, but you could still likely find one on the internet.
Similar Messages
-
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version -
How to perform datalogging in a file using RT controller and a host PC?
I'm Using PXI-8145RT Controller and a Host PC(Dell Laptop),I used the TCP/IP DAQ Vi's but Im getting problems in logging data into a file at the Host using the Vi's .For 3 Channels the program works fine but as I increase the Number of Channels the program stops running on the RT Controller! Do we have to configure some TCP/IP settings for this or i have to use some other methods for datalogging into a file on the host using an RT Controller on the ethernet.
If you increase the number of channels and the RT program stops running, it could be that your scan rate is too fast for the increased number of channels on the 8145. First try to lower your scan rate by a large amount (a factor of 10, for example) to see if this is the problem. If you still see the same behavior when going above 3 channels of input, I would suggest looking at the following links for more information on communication with RT.
General Communication Info:
NI Developer Zone: Communicating with a Real-Time Engine
Specific Documents:
NI Developer Zone: Real-Time FIFO for Deterministic Data Transfer Between VIs
NI Developer Zone: TCP/IP between the Host PC and Real-Time Series Hardware
Furthermore, if you are using LabVIEW RT 7.0, I would highly suggest the use of the RT Communication Wizard. It will create the communication portion of your RT application for you. -
How to Set Input Levels with FirePod and GarageBand
Hello ....
I/ve got Garageband and my Firepod 8 channel interface working ... but I need some tips .. especially on the relationship of input levels between my Firepod and Garageband ....
When I am setting input levels for a recording ... where should the input level be on the track in Garageband? .... Is that volume setting only for playback and mixing? .... or is it for the input as well ...
Thank you ....Where should the initial input levels be set? ... Would you use the loudest
part of the song to do this? ...
Yes, as loud as possible without lighting the FP's clip leds.
When I mix the final product ... and change the volumes on the different
tracks.. aren't you then changing the input levels?
No, you're changing the output levels.
can't you red line and overload the track?
Yes, that's why each track has a fader, so that you don't clip.
Is there a master ouput level indicator
Yes, right over the Master Volume slider.
I guess you can't just put each track as loud as you want ... correct?
As loud as you want without clipping.
I would strongly suggest doing some web searches on "Mixing and Mastering" to learn more about how to mix, there's a TON of info floating around the web. -
4402 LAN Controller and 44 AP Point with CUCM 7.1
First time going to configure 4402 LAN Controller with 44 AP with 7921 wireless IP Phone, Please light me with document and info to configure 4402 lan controller with Access point.
Just connecting Controller and AP in switch both will get registered, I have two LAN Controller for redundancy [ how to configure redundancy in controller ].
For layer 3 roaming what are the basic steps I should configure in controller and AP.Here's a link to the doc that outlines how to configured the controller to best support a 7921:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf
For redundancy you will want to have the controller in the same mobility group:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf
Having them in the same mobility group will also take care of any roaming between controllers. -
I've got a Steinberg MI4 media interface hardware. I have hooked it up to my laptop and opened Garageband. I've set all my system settings to recognize the MI4. I can hear the audio (microphone) in my headphones but am getting no signal through GarageBand. I've made the settings in GarageBand to recognize the MI4 but it's not working. Any ideas?
works fine with current downloadable driver (now August 2008)written a while back for Tiger. Using half CPU cores with only a dozen tracks at low latency but it works (interface MI4 USB1.1, fast asio2 driver eats CPU). If you have other audio or midi devices eg bus-powered midi controller do not use USB splitters and live without the mouse. Otherwise buy platform sharing interface. That is what I am going to do, Audacity is all very well but I want Wavelab Lite as one editor and use Cubase 4.1 anyway. Tiger leaves out a few modern fundamentals, like "auto Put Away/Eject USB device" setting, I notice XP USB2 gets better mileage out of external USB2 (IDE) drives and USB2 bandwidth and connectivity in general. Why is this? A Tiger bug? I am a fan of no commercial OS. As it happens my controller and interface are USB1.1 and happy but that means no audio drive until a Lacie... so the price rises. OS X is better than XP but kind of all over the place, like the planet, they both plod along
-
Does user traffic pass through Controller and Aironet 1030?
Hi All,
I want to beat out some questions that I cannot find exactly guideline in Cisco. I intend to implement 2 Airespace 2000 controller and some 1010s and one 1030 to my main office and branch office. At present, there is a 512kbps WAN link between this two office. So I don't want to let the traffic within the branch office to pass through the WAN link. Therefore, I intend to use the solution that 1 controller stay in main office to serve the 1010s in main office and 1 controller stay in remote office to serve the 1010s in remote office. But the remote site only needs 1 AP, thus I would like to use one 1030 to stay in branch office and 2 controller stay in main office to perform controller's redundancy. I would like to know Does the clients' traffic pass through the link between 1030 and controller as the same as 1010? I does very confuse whether 1030 has this feature because I found some blur instruction of 1030 in Cisco.
Further, if I place one of the controller in remote office, how can I control the APs in remote office to choose the local controller instead of the controller in main office using Layer 3 discovery method? Does any know? Thanks!
Jason,
best regards,Hi Jason,
Hopefully this info will clear this up for you;
Q. Can I install an access point (AP) at a remote office and install a Cisco WLC at my headquarters? Does the Lightweight AP Protocol (LWAPP) work over a WAN?
A. Yes, you can have the WLCs across the WAN from the APs. LWAPP works over a WAN. Use Remote Edge AP (REAP) mode. REAP allows the control of an AP by a remote controller that is connected via a WAN link. Traffic is bridged onto the LAN link locally, which avoids the need to unnecessarily send local traffic over the WAN link. This is precisely one of the greatest advantages of having WLCs in your wireless network.
Note: Not all lightweight APs support REAP. For example, the 1030 AP supports REAP, but the 1010 and 1020 AP do not support REAP. Before you plan to implement REAP, check to determine if the APs support it. Cisco IOS Software APs that have been converted to LWAPP do not support REAP.
Q. I want to set up the Cisco 1030 Lightweight Access Point (AP) with a Cisco WLC in Remote Edge AP (REAP) mode. In this mode, is all wireless traffic tunneled back to the WLC? Additionally, if the AP cannot contact the WLC, what happens to the wireless clients?
A. The 1030 AP tunnels all WLC traffic (control and management traffic) to the WLC via Lightweight AP Protocol (LWAPP). All data traffic stays local to the AP. The 1030 REAP can only reside on a single subnet because it cannot perform IEEE 802.1Q VLAN tagging. As such, traffic on each service set identifier (SSID) terminates on the same subnet on the wired network. So, while wireless traffic may be segmented over the air between SSIDs, user traffic is not separated on the wired side. Access to local network resources is maintained throughout WAN outages.
At times of WAN link outage, all WLANs except the first is decommissioned. Therefore, use WLAN 1 as the primary WLAN and plan security policies accordingly. Cisco recommends that you use a local authentication/encryption method, such as the Wi-Fi Protected Access (WPA) Pre-Shared Key (WPA-PSK), on this first WLAN.
Note: Wired Equivalent Privacy (WEP) suffices, but this method is not recommended because of known security vulnerabilities.
If you use WPA-PSK (or WEP), properly configured users are still able to gain access to local network resources even when the WAN link is down.
From this doc;
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml
Hope this helps!
Rob
Please remember to rate helpful posts..... -
[915 Series] Ethernet Controller and SM Bus Controller Drivers
I have a 915P Neo2 Platinum Motherboard.
I recently built a computer. When I put the driver CD in my computer freezes on loading. I have trieed finding the source of that problem. Now I am trying to Download the drivers. I have downloaded most but the two Question mark thingos it says on my device manager list are "Ethernet Controller" and "SM Bus controller". I have searched on the driver download list. I can find the right ethernet controller but when I download the zipped folder and unzip it, it just has a few random files that I cant open. No setup files. How do i use these files?Hi Adams.. first we need your sys specsQuote
-CPU speed, FSB speed and OC speed which you always run if you OC, also include whether HT is enabled or not.
-RAM, the timing and the OC timing which you always run,
-exact motherboard model,
-display card, if u OC include the info as well
-PSU, power supply unit, brand and model, even better to include the exact wattage of all +3.3V, +5V and 12V rails
-HDDs, CDROMs and which ports you plug them in
-other PCI cards and which slots you plug them in
-other peripherals like USB, 1394 devices which you plug them in and create the issue
-BIOS settings which you changed from the default values, such as enable/disable some built-in devices, ACPI, etc
-OS, with service pack -
Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...
You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534 -
I am trying to connect Garritan Personal Symphony to Logic Express and Garageband. A dialog box pops up and asks for plugin Garritan-P. Where do I find it and what do I do with it. I can't locate this plugin doing searches on any of the porgrams.
I'm not sure which version of Garritan Personal Orchestra you have or when you are getting a window pop-up, but check this link for starters:
http://afjohnston.blogspot.com/2009/11/using-garritan-personal-orchestra-gpo.htm l -
When I try to download all my info like notes and contacts onto a new iphone an error appears saying that it is incompatible or the backup was corrup, how do I fix this?
Which is it? Is "it" incompatible or is the backup corrupt?
What specifically are you attempting and what specifically is occurring? -
IPhoto, iMovie and GarageBand with multiple apple ID's.
Hello,
First of all I want to excuse myself for my bad english. It's not my native language.
I've bought a Macbook Air 11" two weeks ago and I logged in the app store using an "old" apple ID. Now that I wanted to use a new apple ID to start "clean" I also decided to reinstall my macbook.
Once I tried to redownload iMovie, iPhoto and GarageBand I got the message that those applications are "attached" to a other account. I still got that account, but I want to know if I can "remove" those apps on the "old" account and download them using my "new" account.
I don't want to keep two accounts because I logged in the first time with a other account. Is this possible?
Cheers,
SqSo the first time you log in with an apple id the apps are "attached" to that account without any notice? I can't even purchase them. Reinstalling my mac didn't give me back the applications either. I'm flabbergasted how the apple ID's work and that they can get away with this. Support must come from other users as I can't depend on Apple themselfs. Unbelievable...
Thanks for the suppor Carolyn. -
My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.
Downloading past purchases from the App Store ... - Support - Apple
-
D20 Blue Screen loading Windows 7-64bit using Intel controller and Marvell enabled
Hi, Help,
Hardware:
D20, 4158, Four 500GB Seagate SATA drives configured as a RAID10 1TB virtual disk (partitioned into five logical drives).
Goal:
Recover or repair a degraded RAID array.
I want to be able to launch Windows 7-64bit using the Intel controller and have it access the virtual disk of the degraded RAID array attached to the Marvell controller. Subsequently, I want to use the Marvell MRU utility to repair/recover the situation.
Situation/Issue:
Things ran well for two years and two months until yesterday. Now, when booting I see:
1962: No operating system found. Press F1 to repeat boot sequence.
If I use the Windows 7 installation CD and load the Marvell driver, the attempt to recover the operating system reports that the MBR is corrupt and cannot be repaired.
If I boot with the Marvell controller disabled in the D20 BIOS, using a Windows 7 installation (with Marvell drivers) attached to the Intel controller, everything works except (of course) I cannot access the RAID drives.
If I reboot with the Marvell controller enabled, using the same Windows 7 installation via Intel controller, I see a "Starting Windows" announcement followed by a flash of the blue screen of death.
The BSOD message is unspecific, no error code, just...
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen,
restart your computer..."
Additional information:
If I access the Marvell BIOS (ctrl-M) and look at Devices, one of the four Seagate drives has status FREE instead of status ASSIGNED. If I run the Marvell BIOS verify disk utility diagnosic on that FREE status disk, I get a fault error after about 30 minutes of scanning. So, one Seagate disk is sour and somehow the MBR was corrupted at the same time.
History:
Two years ago, during the intial configuration, I could access the Marvell RAID disks from this Intel-controller-booted Windows 7 installation, but my fuzzy memory is that I had to change something in the D20 BIOS, such as the AHCI setting or similar.
Status:
Today, using the Intel controller to boot Windows 7 with the Marvell controller enabled is just BSOD. What am I missing or failing to do or set?
Thank you in advance for any help and ideas.
-John
Solved!
Go to Solution.Update:
I replaced the 500GB Seagate disk with a new 500GB Seagate. I ran the Marvell BIOS verify disk utility on the new disk drive and it passed with no errors. Following the steps given in the Marvell MRU online help, I rebuilt the virtual disk. Upon completion (which took a little more than an hour to complete), I rebooted. Before the Seagate disk went south yesterday, the Marvell virtual disk contained one primary partition (C, and four NTFS drives (D:, E:, F:, and Z. Now it contains three primary NTFS drives (C:, F:, and Z. An extended partition contains D: (an unformatted volume of size 199.30MB) and an unused space of 199.30GB.
Event log:
Looking at the event log, Windows reports that the disk in question raised a warning yesterday. Three messages share the same timestamp (all from mv64xx (a Marvell process):
"Physical disk 16 is plugged out."
"Virtual disk 0 is degraded."
"Physical disk 16 is plugged in."
Eight seconds later, UserPnp logs:
"Driver Management has concluded the process to add Service disk for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0"
One second later, UserPnp logs:
"Driver Management concluded the process to install driver FileRepository\disk.inf_amd64_neutral_10ce25bbc5a9cc43\disk.inf for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0x0."
Questions:
Is it possible that UserPnp corrupted the Marvell virtual disk after an intermittent physical disk unplugged/plugged-in event that happened when the Seagate hardware went failed. It looks to me like my D: and E: are toast despite RAID 10.
Any ideas? Is there anyway to recover the Marvell virtual disk configuration to the state prior to the hardware failure? If not, what good is RAID 10?
My apologies for the long posting, but I am an old software guy who does not understand the intricacies of RAID and disk management.
Thank you in advance for any leads toward a solution,
-John -
Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
<sup>a</sup>
Main Circuit Board
<sup>b</sup>
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
<sup>c,d</sup>
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
<small>(mouse over user name for details)</small>
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection <small>[Back to Top]</small>
Group
Policies
Norton AntiVirus Version 18.1.0.37
Virus Definitions Version Not Up To Date
Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days<small>(mouse
over last used for details)</small>
Hosted Virtual Machines<small> (mouse over
name for details)</small>
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse
Maybe you are looking for
-
How do I tweak Snow Leopard (Finder & Safari) to make it behave more like Tiger?
I've recently upgraded to a Mac Pro 4,1 from a Power Mac G4, and to Mac OS X 10.6.8 from 10.4.11 in the process. There are a few little ways in which Snow Leopard behaves differently to Tiger, and I'm wondering if (for each item on the list below) an
-
I dowloaded Lion OSX and installed. I downloaded 13 iitems and installed only 12. At the end of the insta;;ation I received a notice thst Safart can not connect to Server. Safari does not work on user where installation was made. It work on other use
-
Unable to create the Mailbox Store. The database returned an error
hi we have a new unity connection 10.51 install . trying to create a 2nd mailbax store and get the following error: Unable to create the Mailbox Store. The database returned an error. creates the store but i can't open it to mount it / enable it.
-
Hi to all I got this chart witch plots values from a multimeter, Parallel with that I control a switch to my home made HW, so the multi meter measures a current when the switch is on and Volt when Off. The chart cant see diffence between these two me
-
I was working in a project for a client, when the lights go out. When the computer start again, I see that my PSD file is there, I can see a thumbnail preview, but when I try to open with Photoshop CS5 (the same that I used to create it) It says:"