Hi installed Arch i686 with Nouveau and drivers. now dead end
went to post a long typed output from Arch terminal, no desktop, I had changed my password when I went to post it decided I was not logged in and lost the lot.
Just a short note now.
xorg.conf.d which nano refuses to look at and pmagic file manager shows nothing about the nvidia nv vesa and fbdev modules that are demanded by xorg as shown by the log.
There were also error commands in xinitrc, named twm, xterm were not found.
I also installed kde which has its own window maker.
I wonder where to go with Arch from this seemingly dead end.
Sorry for the sparse post, too tired to type it all out again from Arch terminal.
Regards
Zoroid
Last edited by zoroid (2011-11-21 05:05:25)
Thanks Mr.Elendig and the others,
got kde up and running now, took a bit of time the first time, and twm and xterm helped.
I was too tired to type out the whole log again last night, so sorry for the kiss post, even so it put me on the right path.
The card was an Nvidia G Force GT 240, and its going fine with Nouveau in an Intel core duo Gigabyte MB 4 gig dd3 ram
Mr.Elendig wrote:1. what hardware do you have?
2. read https://wiki.archlinux.org/index.php/Xorg
3. you are getting the errors about xinitrc because you did not install twm and xterm etc, see 2.
Last edited by zoroid (2011-11-22 05:06:38)
Similar Messages
-
Install Arch Linux with UEFI and GPT
Hi, I purchased a new laptop and I created a partition with Windows 8 (default OS on laptop) and another partition where I want to install Arch Linux.
When I tried to install Arch Linux not boot from CD. After searching in Google I downloaded the latest Arch Linux ISO (2012-12-01) and tried again.
This time CD started without problems but when I used cfdisk showed an error with GPT partition. I went back to search in Google and I read about gdisk and gfdisk and I try it but when I partitioning to install Arch Linux partition show that may cause damage. I searched and searched without success and I wonder if there is a Arch Linux GPT install guide or if someone knows how to install Arch Linux with GPT and a Windows 8 partition in UEFI.
Thanks and regards.Hi again, finally I got "install" Arch Linux but when I reboot the follow message appears:
"No Booteable Device, Hit any key."
I don't know if I broke Windows Boot Manager, UEFI or both...
I tried to reinstall GRUB but was unsuccessful.
Can anyone help me?
Thanks and regards. -
Fresh installed arch hanged with Skype in wmii during video call.
Fresh installed arch hanged with Skype in wmi during video call. The keyboard stopped reacting to any keys, including Ctrl+Alt+F1 (F2, F3, F4, F5, F6), Ctrl+Alt+Backspace.
The timer was actually working but updating in 3-5 seconds. While I had powerful laptop (i5 2.6GHz, 8Gb RAM). So,... I had to use power button to restart.
Any ideas how to avoid this in future?
Dis anybody experience similar issue?try webcam scharing had 20 scharing on there and wibe them out
and myn works again -
I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
My iPhone 4 will not charge and is now dead.
My iPhone 4 will not charge and is now dead. I updated the software about 2 weeks ago but since the phone is dead I can find out which version I have. It started giving me the prompt "this accessory does not support charging this device". I tried charging in my car, two separate wall chargers and on my MacBook Pro. Have never had a problem charging it before. When I would try to charge it, I would get a green battery icon with a plug in it, indicating the battery was fully charged. I now have it plugged into a wall charger, it shows the lighting bolt and nearly drained battery but the phone will not turn on. Any ideas?
Hi,
You probably need to do this...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
But Try Here First
Frozen or unresponsive iPhone
From Here:
http://www.apple.com/support/iphone/basics/ -
Hi guys,
tl;dr: Want to have a GUI, tried to get it on my own, got stuck at
(EE) [drm] KMS not enabled
(though it should be enabled) and no GUI
It would be nice if someone little bit more expirienced could help (and perhaps explain) a little bit...
So here's the long version (In case I messed things up without noticing):
I installed arch on an old machine. After first reboot screen hung at
root: clean, 53232/1310720 files, 906718/5242880 blocks
Got past that installing proprietary nvidia drivers (nvidia-304xx for the GeForce 7500 LE).
Testing X failed. Got X working with nouveau driver.
Rebooted and again hung at
root: clean, 53232/1310720 files, 906718/5242880 blocks
(So proprietary: terminal, but no X - nouveau: No terminal, but X)
Tried autologin and start X at login: Same result.
According to the wiki, KMS
is required by the Nouveau driver
and according to http://nouveau.freedesktop.org/wiki/KernelModeSetting/
KMS is on by default
But according to
/var/log/Xorg.0.log
(EE) [drm] KMS not enabled
Did some more reading (especially http://nouveau.freedesktop.org/wiki/TroubleShooting/ was helpful) but found no useful information (eg. on how to enable KMS), so I decided to ask for help...
Here's the full Xorg.0.log (What else would be useful?):
[ 26.378]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 26.378] X Protocol Version 11, Revision 0
[ 26.378] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 26.378] Current Operating System: Linux plaything 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:01:37 CET 2014 x86_64
[ 26.378] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a37b4e97-dcfd-40be-a0eb-9307e545ff61 rw quiet
[ 26.378] Build Date: 09 January 2014 08:47:24AM
[ 26.379]
[ 26.379] Current version of pixman: 0.32.4
[ 26.379] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.379] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.379] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 30 23:02:22 2014
[ 26.421] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.437] (==) No Layout section. Using the first Screen section.
[ 26.437] (==) No screen section available. Using defaults.
[ 26.437] (**) |-->Screen "Default Screen Section" (0)
[ 26.437] (**) | |-->Monitor "<default monitor>"
[ 26.446] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 26.446] (**) | |-->Device "n"
[ 26.446] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.446] (==) Automatically adding devices
[ 26.446] (==) Automatically enabling devices
[ 26.446] (==) Automatically adding GPU devices
[ 26.466] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 26.466] Entry deleted from font path.
[ 26.466] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 26.466] Entry deleted from font path.
[ 26.466] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 26.466] Entry deleted from font path.
[ 26.466] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 26.467] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 26.467] Entry deleted from font path.
[ 26.467] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 26.467] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 26.467] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.467] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.467] (II) Loader magic: 0x804c80
[ 26.467] (II) Module ABI versions:
[ 26.467] X.Org ANSI C Emulation: 0.4
[ 26.467] X.Org Video Driver: 15.0
[ 26.467] X.Org XInput driver : 20.0
[ 26.467] X.Org Server Extension : 8.0
[ 26.470] (--) PCI:*(0:2:0:0) 10de:01dd:174b:2510 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, BIOS @ 0x????????/131072
[ 26.471] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26.472] Initializing built-in extension Generic Event Extension
[ 26.472] Initializing built-in extension SHAPE
[ 26.472] Initializing built-in extension MIT-SHM
[ 26.472] Initializing built-in extension XInputExtension
[ 26.472] Initializing built-in extension XTEST
[ 26.472] Initializing built-in extension BIG-REQUESTS
[ 26.472] Initializing built-in extension SYNC
[ 26.472] Initializing built-in extension XKEYBOARD
[ 26.472] Initializing built-in extension XC-MISC
[ 26.472] Initializing built-in extension SECURITY
[ 26.472] Initializing built-in extension XINERAMA
[ 26.472] Initializing built-in extension XFIXES
[ 26.472] Initializing built-in extension RENDER
[ 26.472] Initializing built-in extension RANDR
[ 26.472] Initializing built-in extension COMPOSITE
[ 26.472] Initializing built-in extension DAMAGE
[ 26.472] Initializing built-in extension MIT-SCREEN-SAVER
[ 26.472] Initializing built-in extension DOUBLE-BUFFER
[ 26.472] Initializing built-in extension RECORD
[ 26.472] Initializing built-in extension DPMS
[ 26.472] Initializing built-in extension Present
[ 26.472] Initializing built-in extension DRI3
[ 26.472] Initializing built-in extension X-Resource
[ 26.472] Initializing built-in extension XVideo
[ 26.472] Initializing built-in extension XVideo-MotionCompensation
[ 26.472] Initializing built-in extension XFree86-VidModeExtension
[ 26.472] Initializing built-in extension XFree86-DGA
[ 26.472] Initializing built-in extension XFree86-DRI
[ 26.472] Initializing built-in extension DRI2
[ 26.472] (II) LoadModule: "glx"
[ 26.482] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.719] (II) Module glx: vendor="X.Org Foundation"
[ 26.719] compiled for 1.15.0, module version = 1.0.0
[ 26.719] ABI class: X.Org Server Extension, version 8.0
[ 26.719] (==) AIGLX enabled
[ 26.719] Loading extension GLX
[ 26.719] (II) LoadModule: "nouveau"
[ 26.720] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 26.781] (II) Module nouveau: vendor="X.Org Foundation"
[ 26.781] compiled for 1.15.0, module version = 1.0.10
[ 26.781] Module class: X.Org Video Driver
[ 26.781] ABI class: X.Org Video Driver, version 15.0
[ 26.781] (II) NOUVEAU driver
[ 26.782] (II) NOUVEAU driver for NVIDIA chipset families :
[ 26.782] RIVA TNT (NV04)
[ 26.782] RIVA TNT2 (NV05)
[ 26.782] GeForce 256 (NV10)
[ 26.782] GeForce 2 (NV11, NV15)
[ 26.782] GeForce 4MX (NV17, NV18)
[ 26.782] GeForce 3 (NV20)
[ 26.782] GeForce 4Ti (NV25, NV28)
[ 26.782] GeForce FX (NV3x)
[ 26.782] GeForce 6 (NV4x)
[ 26.782] GeForce 7 (G7x)
[ 26.782] GeForce 8 (G8x)
[ 26.782] GeForce GTX 200 (NVA0)
[ 26.782] GeForce GTX 400 (NVC0)
[ 26.782] (++) using VT number 1
[ 26.783] (EE) [drm] KMS not enabled
[ 26.783] (EE) No devices detected.
[ 26.783] (EE)
Fatal server error:
[ 26.783] (EE) no screens found(EE)
[ 26.783] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 26.783] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.783] (EE)First thanks for answering
Checked dmesg but it does not mention KMS (dmesg | grep KMS returns nothing)
and I was not able to find a virtualisation option in my BIOS.
Also I didn't find something similar looking over dmesg...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 26 09:01:37 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a37b4e97-dcfd-40be-a0eb-9307e545ff61 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fedffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fee0000-0x000000005fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005fee3000-0x000000005feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005fef0000-0x000000005fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Packard Bell BV IMEDIA MC 9745/Cuba MS-7301, BIOS W7301VP2.027 10/27/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ d0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[ 0.000000] e820: last_pfn = 0x5fee0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 3 base 05FF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f46e0-0x000f46ef] mapped at [ffff8800000f46e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5fc00000-0x5fdfffff]
[ 0.000000] [mem 0x5fc00000-0x5fdfffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fbfffff]
[ 0.000000] [mem 0x5c000000-0x5fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fedffff]
[ 0.000000] [mem 0x5fe00000-0x5fedffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a02000-0x37cf8fff]
[ 0.000000] ACPI: RSDP 00000000000f8ae0 00014 (v00 PacBel)
[ 0.000000] ACPI: RSDT 000000005fee3040 0003C (v01 PacBel PackBell 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000005fee30c0 00074 (v01 PacBel PackBell 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000005fee3180 06523 (v01 PACBEL AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000005fee0000 00040
[ 0.000000] ACPI: SLIC 000000005fee9800 00176 (v01 PacBel PackBell 42302E31 AWRD 00000000)
[ 0.000000] ACPI: MCFG 000000005fee99c0 0003C (v01 PacBel PackBell 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000005fee9700 00090 (v01 PacBel PackBell 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000005fee9a40 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 000000005fee9ed0 002F1 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fedffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fedffff]
[ 0.000000] NODE_DATA [mem 0x5fedb000-0x5fedffff]
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5fedffff]
[ 0.000000] On node 0 totalpages: 392830
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6076 pages used for memmap
[ 0.000000] DMA32 zone: 388832 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x5ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386669
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a37b4e97-dcfd-40be-a0eb-9307e545ff61 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ d0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1531400K/1571320K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 39920K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6291456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2792.957 MHz processor
[ 0.006674] Calibrating delay loop (skipped), value calculated using timer frequency.. 5588.66 BogoMIPS (lpj=9309856)
[ 0.011289] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012344] Mount-cache hash table entries: 256
[ 0.012786] Initializing cgroup subsys memory
[ 0.012820] Initializing cgroup subsys devices
[ 0.012825] Initializing cgroup subsys freezer
[ 0.012829] Initializing cgroup subsys net_cls
[ 0.012833] Initializing cgroup subsys blkio
[ 0.012883] CPU: Physical Processor ID: 0
[ 0.012887] CPU: Processor Core ID: 0
[ 0.012891] mce: CPU supports 4 MCE banks
[ 0.012913] CPU0: Thermal monitoring enabled (TM1)
[ 0.012928] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
[ 0.013032] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.014523] ACPI: Core revision 20130725
[ 0.020923] ACPI: All ACPI Tables successfully acquired
[ 0.021923] ftrace: allocating 20320 entries in 80 pages
[ 0.030837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066011] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 06, stepping: 04)
[ 0.066666] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.066666] ... version: 0
[ 0.066666] ... bit width: 40
[ 0.066666] ... generic registers: 18
[ 0.066666] ... value mask: 000000ffffffffff
[ 0.066666] ... max period: 0000007fffffffff
[ 0.066666] ... fixed-purpose events: 0
[ 0.066666] ... event mask: 000000000003ffff
[ 0.083426] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090131] smpboot: Booting Node 0, Processors # 1 OK
[ 0.103307] Brought up 2 CPUs
[ 0.103313] smpboot: Total of 2 processors activated (11176.32 BogoMIPS)
[ 0.105254] devtmpfs: initialized
[ 0.109408] PM: Registering ACPI NVS region [mem 0x5fee0000-0x5fee2fff] (12288 bytes)
[ 0.110866] RTC time: 8:14:47, date: 02/01/14
[ 0.110947] NET: Registered protocol family 16
[ 0.111163] cpuidle: using governor ladder
[ 0.111167] cpuidle: using governor menu
[ 0.111208] ACPI: bus type PCI registered
[ 0.111213] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.111319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.111324] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.135738] PCI: Using configuration type 1 for base access
[ 0.135903] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.135906] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.135908] mtrr: probably your BIOS does not setup all CPUs.
[ 0.135909] mtrr: corrected configuration.
[ 0.136817] bio: create slab <bio-0> at 0
[ 0.136843] ACPI: Added _OSI(Module Device)
[ 0.136843] ACPI: Added _OSI(Processor Device)
[ 0.136843] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136843] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138901] ACPI: EC: Look up EC in DSDT
[ 0.147446] ACPI: SSDT 000000005fee9e40 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.147946] ACPI: Dynamic OEM Table Load:
[ 0.147951] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.148273] ACPI: Interpreter enabled
[ 0.148286] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.148294] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.148318] ACPI: (supports S0 S3 S4 S5)
[ 0.148322] ACPI: Using IOAPIC for interrupt routing
[ 0.148365] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.148649] ACPI: No dock devices found.
[ 0.160204] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.160216] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.160220] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.160356] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.160362] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.160367] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.160371] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.160375] acpi PNP0A08:00: host bridge window [mem 0x5ff00000-0xfebfffff] (ignored)
[ 0.160379] PCI: root bus 00: using default resources
[ 0.160821] PCI host bridge to bus 0000:00
[ 0.160829] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.161397] pci 0000:00:00.2: [1106:2327] type 00 class 0x060000
[ 0.161635] pci 0000:00:00.3: [1106:3327] type 00 class 0x060000
[ 0.161871] pci 0000:00:00.4: [1106:4327] type 00 class 0x060000
[ 0.162115] pci 0000:00:00.5: [1106:5327] type 00 class 0x080020
[ 0.162387] pci 0000:00:00.6: [1106:6327] type 00 class 0x060000
[ 0.162628] pci 0000:00:00.7: [1106:7327] type 00 class 0x060000
[ 0.162869] pci 0000:00:01.0: [1106:b999] type 01 class 0x060400
[ 0.163124] pci 0000:00:02.0: [1106:a327] type 01 class 0x060400
[ 0.163236] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.163399] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.163475] pci 0000:00:03.0: [1106:c327] type 01 class 0x060400
[ 0.163602] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.163765] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.163857] pci 0000:00:08.0: [1106:3044] type 00 class 0x0c0010
[ 0.163883] pci 0000:00:08.0: reg 0x10: [mem 0xdffff000-0xdffff7ff]
[ 0.163897] pci 0000:00:08.0: reg 0x14: [io 0xfc00-0xfc7f]
[ 0.163988] pci 0000:00:08.0: supports D2
[ 0.163992] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[ 0.164200] pci 0000:00:0a.0: [13f6:0111] type 00 class 0x040100
[ 0.164226] pci 0000:00:0a.0: reg 0x10: [io 0xf800-0xf8ff]
[ 0.164326] pci 0000:00:0a.0: supports D1 D2
[ 0.164520] pci 0000:00:0f.0: [1106:0591] type 00 class 0x01018f
[ 0.164545] pci 0000:00:0f.0: reg 0x10: [io 0xf400-0xf407]
[ 0.164560] pci 0000:00:0f.0: reg 0x14: [io 0xf000-0xf003]
[ 0.164574] pci 0000:00:0f.0: reg 0x18: [io 0xec00-0xec07]
[ 0.164587] pci 0000:00:0f.0: reg 0x1c: [io 0xe800-0xe803]
[ 0.164601] pci 0000:00:0f.0: reg 0x20: [io 0xe400-0xe40f]
[ 0.164615] pci 0000:00:0f.0: reg 0x24: [io 0xe000-0xe0ff]
[ 0.164857] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[ 0.164923] pci 0000:00:0f.1: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.165186] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.165250] pci 0000:00:10.0: reg 0x20: [io 0xd800-0xd81f]
[ 0.165308] pci 0000:00:10.0: supports D1 D2
[ 0.165311] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165456] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.165531] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.165596] pci 0000:00:10.1: reg 0x20: [io 0xd400-0xd41f]
[ 0.165653] pci 0000:00:10.1: supports D1 D2
[ 0.165656] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165803] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.165873] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.165937] pci 0000:00:10.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.165995] pci 0000:00:10.2: supports D1 D2
[ 0.165998] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166146] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.166218] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.166282] pci 0000:00:10.3: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.166339] pci 0000:00:10.3: supports D1 D2
[ 0.166343] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166497] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.166567] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.166592] pci 0000:00:10.4: reg 0x10: [mem 0xdfffe000-0xdfffe0ff]
[ 0.166691] pci 0000:00:10.4: supports D1 D2
[ 0.166695] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166839] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.166918] pci 0000:00:11.0: [1106:3337] type 00 class 0x060100
[ 0.167234] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.167490] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.167515] pci 0000:00:12.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.167529] pci 0000:00:12.0: reg 0x14: [mem 0xdfffd000-0xdfffd0ff]
[ 0.168244] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.168251] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.168257] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff pref]
[ 0.168528] pci 0000:02:00.0: [10de:01dd] type 00 class 0x030000
[ 0.168547] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[ 0.168565] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.168583] pci 0000:02:00.0: reg 0x1c: [mem 0xdd000000-0xddffffff 64bit]
[ 0.168606] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.168753] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.168767] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.168773] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.168779] pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
[ 0.168788] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.169037] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.169045] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.169052] pci 0000:00:03.0: bridge window [mem 0xdfb00000-0xdfbfffff]
[ 0.169062] pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.169210] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
[ 0.169234] pci 0000:04:01.0: reg 0x10: [mem 0xdfafc000-0xdfafffff 64bit]
[ 0.169331] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.169374] pci 0000:04:01.0: System wakeup disabled by ACPI
[ 0.169432] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.169487] pci 0000:00:13.0: PCI bridge to [bus 04]
[ 0.169493] pci 0000:00:13.0: bridge window [io 0x8000-0x8fff]
[ 0.169499] pci 0000:00:13.0: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.169508] pci 0000:00:13.0: bridge window [mem 0xdf900000-0xdf9fffff 64bit pref]
[ 0.170765] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.170957] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.171149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 0.171343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 0.171497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.171661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
[ 0.171808] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.171970] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
[ 0.172930] ACPI: Enabled 1 GPEs in block 10 to 1F
[ 0.172944] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.173038] Found 1 acpi root devices
[ 0.173158] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173158] vgaarb: loaded
[ 0.173158] vgaarb: bridge control possible 0000:02:00.0
[ 0.173158] PCI: Using ACPI for IRQ routing
[ 0.184737] PCI: pci_cache_line_size set to 64 bytes
[ 0.184836] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.184839] e820: reserve RAM buffer [mem 0x5fee0000-0x5fffffff]
[ 0.185030] NetLabel: Initializing
[ 0.185034] NetLabel: domain hash size = 128
[ 0.185036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185059] NetLabel: unlabeled traffic allowed by default
[ 0.185120] Switched to clocksource refined-jiffies
[ 0.195680] pnp: PnP ACPI init
[ 0.195708] ACPI: bus type PNP registered
[ 0.195924] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.195930] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.195937] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196555] system 00:01: [mem 0xf0001000-0xf0001fff] has been reserved
[ 0.196562] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196653] system 00:02: [mem 0xf0002000-0xf0002fff] has been reserved
[ 0.196660] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196995] system 00:03: [mem 0xf0000000-0xf0000fff] has been reserved
[ 0.197002] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197450] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.197455] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.197459] system 00:04: [io 0x0880-0x088f] has been reserved
[ 0.197464] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197486] pnp 00:05: [dma 4]
[ 0.197536] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.197617] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.197674] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.197741] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.198390] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.198508] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.198515] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198791] system 00:0b: [mem 0x000ce200-0x000cffff] has been reserved
[ 0.198796] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.198800] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.198804] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.198808] system 00:0b: [mem 0x5fee0000-0x5fefffff] could not be reserved
[ 0.198812] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.198816] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.198820] system 00:0b: [mem 0x00100000-0x5fedffff] could not be reserved
[ 0.198824] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.198828] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.198832] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.198837] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.198848] pnp: PnP ACPI: found 12 devices
[ 0.198850] ACPI: bus type PNP unregistered
[ 0.207458] Switched to clocksource acpi_pm
[ 0.207509] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.207515] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.207523] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.207530] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff pref]
[ 0.207544] pci 0000:02:00.0: BAR 6: assigned [mem 0xde000000-0xde01ffff pref]
[ 0.207548] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.207554] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 0.207561] pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
[ 0.207567] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.207577] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.207582] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.207590] pci 0000:00:03.0: bridge window [mem 0xdfb00000-0xdfbfffff]
[ 0.207596] pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.207606] pci 0000:00:13.0: PCI bridge to [bus 04]
[ 0.207611] pci 0000:00:13.0: bridge window [io 0x8000-0x8fff]
[ 0.207619] pci 0000:00:13.0: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.207625] pci 0000:00:13.0: bridge window [mem 0xdf900000-0xdf9fffff 64bit pref]
[ 0.207634] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.207638] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.207642] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.207645] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.207648] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfcfffff pref]
[ 0.207652] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.207655] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdeffffff]
[ 0.207659] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.207662] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.207666] pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff]
[ 0.207669] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.207673] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.207676] pci_bus 0000:04: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 0.207679] pci_bus 0000:04: resource 2 [mem 0xdf900000-0xdf9fffff 64bit pref]
[ 0.207741] NET: Registered protocol family 2
[ 0.208099] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.208319] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.208486] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.208581] TCP: reno registered
[ 0.208594] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.208624] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.208735] NET: Registered protocol family 1
[ 0.208786] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.209588] pci 0000:02:00.0: Boot video device
[ 0.209597] PCI: CLS 4 bytes, default 64
[ 0.209685] Unpacking initramfs...
[ 0.304628] Freeing initrd memory: 3036K (ffff880037a02000 - ffff880037cf9000)
[ 0.304834] Scanning for low memory corruption every 60 seconds
[ 0.305383] audit: initializing netlink socket (disabled)
[ 0.305409] type=2000 audit(1391242487.303:1): initialized
[ 0.322282] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.324824] zbud: loaded
[ 0.325131] VFS: Disk quotas dquot_6.5.2
[ 0.325218] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.325540] msgmni has been set to 2996
[ 0.326126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.326203] io scheduler noop registered
[ 0.326208] io scheduler deadline registered
[ 0.326278] io scheduler cfq registered (default)
[ 0.326706] pcieport 0000:00:02.0: irq 64 for MSI/MSI-X
[ 0.326982] pcieport 0000:00:03.0: irq 65 for MSI/MSI-X
[ 0.327123] ioapic: probe of 0000:00:00.5 failed with error -22
[ 0.327140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.327169] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.327258] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.327262] vesafb: scrolling: redraw
[ 0.327265] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.327408] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 1216k, total 1216k
[ 0.343291] Console: switching to colour frame buffer device 80x30
[ 0.359018] fb0: VESA VGA frame buffer device
[ 0.359078] GHES: HEST is not enabled!
[ 0.359194] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.359929] Linux agpgart interface v0.103
[ 0.360069] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.360073] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.360253] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.360472] mousedev: PS/2 mouse device common for all mice
[ 0.360603] rtc_cmos 00:06: RTC can wake from S4
[ 0.360821] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.360856] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram
[ 0.360973] drop_monitor: Initializing network drop monitor service
[ 0.361073] TCP: cubic registered
[ 0.361298] NET: Registered protocol family 10
[ 0.361617] NET: Registered protocol family 17
[ 0.361632] Key type dns_resolver registered
[ 0.362117] registered taskstats version 1
[ 0.362862] Magic number: 2:64:219
[ 0.362974] rtc_cmos 00:06: setting system clock to 2014-02-01 08:14:48 UTC (1391242488)
[ 0.363051] PM: Hibernation image not present or could not be loaded.
[ 0.364957] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.364962] Write protecting the kernel read-only data: 8192k
[ 0.369593] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
[ 0.371463] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 0.380885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.386910] systemd-udevd[47]: starting version 208
[ 0.445525] SCSI subsystem initialized
[ 0.461329] ACPI: bus type USB registered
[ 0.461417] usbcore: registered new interface driver usbfs
[ 0.461440] usbcore: registered new interface driver hub
[ 0.462121] libata version 3.00 loaded.
[ 0.462864] usbcore: registered new device driver usb
[ 0.464698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.465272] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.465512] ehci-pci: EHCI PCI platform driver
[ 0.526805] firewire_ohci 0000:00:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.526880] pata_via 0000:00:0f.1: version 0.3.4
[ 0.528738] scsi0 : pata_via
[ 0.528910] scsi1 : pata_via
[ 0.529015] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[ 0.529019] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[ 0.529056] sata_via 0000:00:0f.0: version 2.6
[ 0.529269] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 0.530888] scsi2 : sata_via
[ 0.531015] scsi3 : sata_via
[ 0.531085] ata3: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xe400 irq 21
[ 0.531089] ata4: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xe408 irq 21
[ 0.531315] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.531328] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.531400] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d800
[ 0.531711] hub 1-0:1.0: USB hub found
[ 0.531726] hub 1-0:1.0: 2 ports detected
[ 0.532106] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.532117] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 0.532157] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d400
[ 0.532422] hub 2-0:1.0: USB hub found
[ 0.532437] hub 2-0:1.0: 2 ports detected
[ 0.532771] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.532785] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 0.532838] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[ 0.533101] hub 3-0:1.0: USB hub found
[ 0.533115] hub 3-0:1.0: 2 ports detected
[ 0.533501] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.533511] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 0.533551] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[ 0.533809] hub 4-0:1.0: USB hub found
[ 0.533824] hub 4-0:1.0: 2 ports detected
[ 0.534774] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 0.534784] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 0.534832] ehci-pci 0000:00:10.4: irq 21, io mem 0xdfffe000
[ 0.543378] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.543662] hub 5-0:1.0: USB hub found
[ 0.543678] hub 5-0:1.0: 8 ports detected
[ 0.566765] hub 1-0:1.0: USB hub found
[ 0.566782] hub 1-0:1.0: 2 ports detected
[ 0.590105] hub 2-0:1.0: USB hub found
[ 0.590121] hub 2-0:1.0: 2 ports detected
[ 0.613435] hub 3-0:1.0: USB hub found
[ 0.613452] hub 3-0:1.0: 2 ports detected
[ 0.636783] hub 4-0:1.0: USB hub found
[ 0.636802] hub 4-0:1.0: 2 ports detected
[ 0.733360] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.867324] ata2.00: ATAPI: PHILIPS DVD8801, NW02, max UDMA/33
[ 0.880533] ata2.00: configured for UDMA/33
[ 0.884513] scsi 1:0:0:0: CD-ROM PHILIPS DVD8801 NW02 PQ: 0 ANSI: 5
[ 0.938113] ata3.00: ATA-7: ST3250820AS, 3.AAD, max UDMA/133
[ 0.938119] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.004743] ata3.00: configured for UDMA/133
[ 1.004864] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 1.026833] firewire_core 0000:00:08.0: created device fw0: GUID 0010dc00010d6a99, S400
[ 1.206692] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.238301] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.238309] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.238691] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.239015] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.239111] sd 2:0:0:0: [sda] Write Protect is off
[ 1.239117] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.239158] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.287635] sda: sda1 sda2 sda3 sda4 sda5
[ 1.288484] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.306711] tsc: Refined TSC clocksource calibration: 2793.000 MHz
[ 1.723377] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 1.886359] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1.886541] scsi4 : usb-storage 3-2:1.0
[ 1.886673] usbcore: registered new interface driver usb-storage
[ 2.090192] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 2.106588] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.110265] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.306777] Switched to clocksource tsc
[ 2.891527] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.894524] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.897522] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.900490] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.902787] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.903423] systemd[1]: Set hostname to <plaything>.
[ 2.945523] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.950494] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.955519] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.960568] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 3.591733] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.592144] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.592244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.592267] systemd[1]: Starting Remote File Systems.
[ 3.592290] systemd[1]: Reached target Remote File Systems.
[ 3.592308] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.592374] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.592391] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.592444] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.592461] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.592497] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.592514] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.592552] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.592576] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.592645] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.592662] systemd[1]: Starting Paths.
[ 3.592680] systemd[1]: Reached target Paths.
[ 3.592696] systemd[1]: Starting Encrypted Volumes.
[ 3.592715] systemd[1]: Reached target Encrypted Volumes.
[ 3.592763] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.592939] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.592965] systemd[1]: Starting udev Kernel Socket.
[ 3.593003] systemd[1]: Listening on udev Kernel Socket.
[ 3.593023] systemd[1]: Starting udev Control Socket.
[ 3.593063] systemd[1]: Listening on udev Control Socket.
[ 3.593084] systemd[1]: Starting Journal Socket.
[ 3.593166] systemd[1]: Listening on Journal Socket.
[ 3.615844] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.615867] systemd[1]: Starting udev Coldplug all Devices...
[ 3.617490] systemd[1]: Starting Apply Kernel Variables...
[ 3.619270] systemd[1]: Started Load Kernel Modules.
[ 3.619320] systemd[1]: Starting Setup Virtual Console...
[ 3.620083] systemd[1]: Mounting Huge Pages File System...
[ 3.620744] systemd[1]: Mounted FUSE Control File System.
[ 3.655735] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.656418] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.657491] systemd[1]: Mounting Debug File System...
[ 3.658329] systemd[1]: Starting Journal Service...
[ 3.659162] systemd[1]: Started Journal Service.
[ 4.168803] systemd-journald[115]: Vacuuming done, freed 0 bytes
[ 4.317710] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 4.587408] systemd-udevd[138]: starting version 208
[ 5.127819] ACPI: Requesting acpi_cpufreq
[ 5.335569] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.335582] ACPI: Power Button [PWRB]
[ 5.335669] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.335678] ACPI: Sleep Button [SLPB]
[ 5.335779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.335787] ACPI: Power Button [PWRF]
[ 5.568863] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.568869] ACPI: Thermal Zone [THRM] (40 C)
[ 5.822184] agpgart: Detected VIA P4M890 chipset
[ 5.830806] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 5.887988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.546795] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.546838] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 6.551408] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1c800, 00:19:db:37:46:0d, IRQ 23
[ 6.552220] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[ 6.619182] microcode: CPU0 sig=0xf64, pf=0x4, revision=0x4
[ 6.620850] pci 0000:00:13.0: setting latency timer to 64
[ 6.621044] snd_hda_intel 0000:04:01.0: irq 66 for MSI/MSI-X
[ 6.621102] snd_hda_intel 0000:04:01.0: PCI: Disallowing DAC for device
[ 6.661358] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM06 1 (20130725/utaddress-251)
[ 6.661372] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM05 2 (20130725/utaddress-251)
[ 6.661379] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM04 3 (20130725/utaddress-251)
[ 6.661385] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM03 4 (20130725/utaddress-251)
[ 6.661391] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM02 5 (20130725/utaddress-251)
[ 6.661397] ACPI Warning: 0x0000000000000500-0x0000000000000507 SystemIO conflicts with Region \SM00 6 (20130725/utaddress-251)
[ 6.661404] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.795628] [drm] Initialized drm 1.1.0 20060810
[ 6.801263] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.829208] usbcore: registered new interface driver usbhid
[ 6.829216] usbhid: USB HID core driver
[ 6.835393] microcode: CPU1 sig=0xf64, pf=0x4, revision=0x4
[ 6.860307] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.904649] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input5
[ 6.932606] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input13
[ 6.932897] input: HDA VIA VT82xx Line Out Side as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input12
[ 6.933135] input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input11
[ 6.933566] input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input10
[ 6.933804] input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input9
[ 6.934030] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8
[ 6.934277] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input7
[ 6.934506] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input6
[ 6.952171] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.0/input/input14
[ 6.956646] hid-generic 0003:1532:0009.0001: input,hidraw0: USB HID v10.01 Mouse [Tempest Habu Mouse] on usb-0000:00:10.3-1/input0
[ 6.959162] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1:1.1/input/input15
[ 6.959476] hid-generic 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:10.3-1/input1
[ 7.031600] wmi: Mapper loaded
[ 7.080209] systemd-udevd[144]: renamed network interface eth0 to enp0s18
[ 7.437383] Adding 2097148k swap on /swapfile. Priority:-1 extents:27 across:3813440k FS
[ 7.629458] checking generic (c0000000 130000) vs hw (c0000000 10000000)
[ 7.629466] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 7.629495] Console: switching to colour dummy device 80x25
[ 7.630443] [drm] hdmi device not found 2 0 1
[ 7.630619] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x046d00a3
[ 7.630624] nouveau [ DEVICE][0000:02:00.0] Chipset: G72 (NV46)
[ 7.630628] nouveau [ DEVICE][0000:02:00.0] Family : NV40
[ 7.632676] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 7.716068] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 7.716075] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 7.716221] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 7.716227] nouveau [ VBIOS][0000:02:00.0] version 8a.66.51.c3.34
[ 7.716307] nouveau W[ VBIOS][0000:02:00.0] unknown i2c type 64
[ 7.716312] nouveau W[ VBIOS][0000:02:00.0] unknown i2c type 64
[ 7.716331] nouveau W[ VBIOS][0000:02:00.0] 0xd250[ ]: unknown bits in register 0x40600858
[ 7.716348] nouveau W[ VBIOS][0000:02:00.0] 0xd2b0[ ]: unknown bits in register 0x40101000
[ 7.716355] nouveau W[ VBIOS][0000:02:00.0] 0xd319[ ]: unknown bits in register 0x03594e04
[ 7.716362] nouveau W[ VBIOS][0000:02:00.0] 0xd3b4[ ]: unknown bits in register 0x40682608
[ 7.716367] nouveau W[ VBIOS][0000:02:00.0] 0xd3f0[ ]: unknown bits in register 0x40100220
[ 7.716373] nouveau E[ VBIOS][0000:02:00.0] 0xd510[ ]: unknown opcode 0x14
[ 7.716424] nouveau [ PFB][0000:02:00.0] RAM type: DDR2
[ 7.716428] nouveau [ PFB][0000:02:00.0] RAM size: 128 MiB
[ 7.716432] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 7.733640] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external
[ 7.733664] nouveau [ PTHERM][0000:02:00.0] fan management: disabled
[ 7.733670] nouveau [ PTHERM][0000:02:00.0] internal sensor: no
[ 7.753883] nouveau 0000:02:00.0: PCI: Disallowing DAC for device
[ 7.754021] [TTM] Zone kernel: Available graphics memory: 768516 kiB
[ 7.754025] [TTM] Initializing pool allocator
[ 7.754034] [TTM] Initializing DMA pool allocator
[ 7.754055] nouveau [ DRM] VRAM: 124 MiB
[ 7.754061] nouveau [ DRM] GART: 512 MiB
[ 7.754067] nouveau W[ DRM] DAC load detection comparison table version 9.5 not known
[ 7.754079] [TTM] Finalizing pool allocator
[ 7.754087] [TTM] Finalizing DMA pool allocator
[ 7.754150] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 8.676606] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[ 8.678259] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.794000] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.118951] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 9.173867] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.243828] systemd-journald[115]: Received request to flush runtime journal from PID 1 -
I started installing Arch around 8pm tonight and it's freaken 7am!
I started installing Arch around 8pm last night and it's almost 7am now and I still don't have a working system. My xorg.conf file is screwed up, my screen resolution is in the freaken 500x300's, no sound, my wifi don't work. Nothing works. I've read through every wiki out there and they're no help to me. Can someone please help me get this solved? I'm thinking I should just give up and leave it alone as I'm at my witends with this.
I can not post my xorg file here as I'm on another computer because I can't get it working right. I don't even have a clue what I did to even get to where I am. I really need someone in my area to meet up and help me, I SUCK at online wikis and stuff.
I'm going to go to sleep and start completely over tomorrow. I know I can get through the partitioning and all, but after that I'm f***ing lost. -
I purchased a Mac book Pro in Aug 2012 with lion and have upgraded to mountain lion. I currently am looking to install the segate 750 gig hybrid drive. I watching video I shows me needing a OSX 10 disk to boot off of when the new disk is in and the use time capsule to restore system from back up drive to new hybrid. Hope I got this correct so far. that being said my Mac Book did not come with a disk therefore is one available, when I get to point of restoring from back up with it be the same mountain lion system I had. Sorr if this sounds redudant.. Thank you in advance
Connect the new hybrid drive to your MBP. Start up your MBP holding the OPTION key, the two HDD icons will appear. Select the 'restore' icon on the right. When you get to the menu where you have 4 options, select Disk Utility. Format the drive and then you can use the option of restoring it from Time Machine.
Ciao. -
Installing Arch i686 on my Compaq ProLiant 5500. Will it detect the..
I got a Compaq ProLiant 5500 and going to install Arch on it for a web/email server so will it detect the SCSI's out of box or what?
Also, how should I partition my drives for it? It'll be a web/mail/dns/dhcp server.The driver for SCSI drives is in the ARch kernel so it shouldn't be a problem. I have a scsi-drive on one of my computer's and it has no problems. As how to partition, I'd look at one of the BSD-guides. Alot of BSD's are used for mail servers and have good advice on how to partition. If i remember correctly you'll want partitions for /, /tmp, and /var... Here, I done looked it up for ya :
http://openbsd.org/faq/faq4.html#Partitioning -
Compatibility of LabView 2012 installed on XP with Vision and Trad DAQ
Is LabView 2012 runnung under Windows XP compatible with
A: NI Vision 2011 ?
B: Traditional DAQ 7.4.4 ?This should answer your question:
Windows Version Compatibility with LabVIEW
Compatible Versions of Vision Development Module with LabVIEW and LabWindows/CVI
NI-IMAQ, NI-IMAQdx, NI-IMAQ I/O, and VAS Compatibility with Different LabVIEW Versions
NI-DAQ and LabVIEW Version Compatibility (for Windows)
I would still suggest to have a look at the readme files as well.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
Printing with R1800 and Mac - now getting beautiful prints - thank you everyone
I want to give a huge "thank you" to all the people on this forum who have discussed how to set up color-managed printing on Epson printers. As a complete novice, I naively bought an R1800 printer and thought that I would just whip out my prints at home. Alas, after messing with this off and on for almost a year, and after burning through 2 complete sets of cartridges and untold quantities of Epson Ultra Premium Luster paper, I was roundly cursing color management, profiles, monitor calibration, Epson, Lightroom, and photography in general. But the information from Jason Hicking in post 17 of one of the many threads on printing problems ( http://www.adobeforums.com/webx?128@@.3c05eae6 ) fixed my problem and I am now getting gorgeous 13x19" prints that look like what I see on the screen. Jason Hicking deserves an extra round of kudos for the investigation he did on this.
I am just a hobbyist and got my very first SLR camera only 18 months ago. I could never have gotten to this point without everything I have learned from this forum. Many, many people contributed pieces of information that helped me put the puzzle together.
Now, anyone have any ideas on how to get more wall space for putting up framed photos? :)
--Kimberly SmithClaude
Glad to hear you've now got a working solution as I know you've put a lot of effort in yourself to resolve the issue with your 3800. Keep us up to date with any changes will you?
DYP
Thanks for the thanks! I'm glad that I was able to nudge you in the right direction, sometimes we probably know the answer but just need someone to show us a different route to it. I'll come back to you shortly with regards to platform and driver versions if you don't mind as it will help in the research I'm doing as I mentioned in my initial reply to Kimberly.
John
I'll also keep you in the loop with the discussion between DYP and myself on the driver issues if you like, and I'll also try to explain the theory between using Epson profiles and custom-built profiles for those who'd like to usderstand the issue deeper.
I appreciate fully that it's not just Adobe but until someone can fully explain the complete workflow interactions between different versions of Lightroom, Colorsync and the Epson drivers then we'll have to keep coming back to the 'apparent' culprit which appears to be Lightroom's new print pipeline. I say 'apparent' as the tests I've done so far show that my workaround isn't needed for InDesign, Illustrator or Photoshop running on the same platform and drivers as Lightroom. If anyone can get 'those who really know' at Adobe to openly describe the above then please do so as this will help with my other avenues of enquiry at Apple and Epson.
As Doyle said for those who custom profile their machines, myself included, the current situation is that we've got a workaround but not a solution. I consider this to be an ongoing quest until it turns into a reliable, user-friendly solution.
Cheers for now, anyone with any thoughts please feel free to chime in.
Jason -
every since i got my iphone out of recovery mode (stuck on screen with itunes and usb cord) by restoring it, NOW every time i plug my iphone it only asks me to restore my iphone (i did this several times). It will not even give me the option to sync my music back...this is extremely frustrating. Please help
so i cant sync music or apps HELP
-
Just installed XP and Drivers, Now no mouse or keyboard
Alright, so I just installed Windows XP through Boot Camp and had everything running on my new iMac. As labeled in the instructions, I popped in the driver install CD after I had XP installed (at this point, the bluetooth keyboard and mouse were both working). The wizard came up and the drivers installed themselves. Everything looked all fine until the setup "ended" with an error message that I didn't get to read, because less than a second later, the computer restarted itself.
When XP came back up, I could tell that the video and sound drivers were installed because I heard the startup sound and the resolution was adjusted. BUT, the mouse and keyboard stopped working totally! I tried plugging in another wired USB mouse and keyboard, but the computer didn't detect them either.
What should I try? Just reinstall the whole thing?
Thanks in advance!No problem!
- Right after I installed Windows XP (a clean install with no other data, of course), I popped in the driver install CD.
- When the installer comes up, close it - we won't be needing that.
- Open My Computer from the Start Menu and find the disc corresponding to the optical drive (Titled "Boot Camp"). Right click on it and select "Open", not "AutoRun". The disc's contents should appear.
- From there, open the folder named "Boot Camp", and then open up "Drivers". In the "Drivers" folder, you'll find a whole bunch of folders that contain all of the drivers for all of the hardware on your Mac.
- You're going to need to manually install all of the drivers EXCEPT the ones pertaining to 'USB' or 'Bluetooth'. Open each folder (better to do them in order), and find the drivers you need to install. It may look overwhelming trying to figure out which ones you need, but it's more simple than you might think. Essentially, each folder contains all of the drivers you need, but there are several versions of them for the different versions of Windows (XP, Vista 32, Vista 64, Win 64, Win 32, etc etc etc...) Figure out which version you have (most likely 32-Bit Windows XP) and install every driver that says anything among the lines of 'Win32' or 'XP' or 'XP32' (you get the idea) (again, avoiding the ones that have to do with Bluetooth or USB).
TIP: The driver installer windows seem to pop up behind the window that you're currently using. Select them from the taskbar.
TIP 2: Some drivers may summon a "Install New Hardware Wizard" window. Just don't touch those. Don't. Touch. They will go away on their own when the device is installed. I promise.
ANOTHER TIP: When you get to the graphics cards installer folders (Either ATI or nVidia), you only need to install the ones for the graphics card that's in your computer!
YET ANOTHER TIP: Don't forget the lingering "MotorolaSetup.exe" installer in the drivers folder!
Hope this helps! If you need any clarification, please ask!
PS: All of the above is why OS X is awesome. Just sayin'. -
HP 15-n086sl problems with windows and drivers amd
Hello to all,
I have a problem with my HP 15 - n086sl .
With native Windows 8 did not.
the problem is the following :
moving from windows 8 to 8.1 I lose the switch graphics cards.
I mean : if I click with the mouse on "configure switchable graphics cards " I get out of a window that says " Unable to start Catalyst Control Center. currently there are no other settings to configure with CCC"
I tried to update the drivers with the ones on the HP site for windows 8.1 , but nothing changes .
From " Device Manager " I noticed that the drivers you have installed AUTOMATIC moving from windows 8 to 8.1 are the same version as on the hp website .
[url=http://postimg.org/image/t3xa7aem3/][img]http://s17.postimg.org/t3xa7aem3/driv.jpg[/img][/url]
If I install the drivers from the AMD website I have the following problems :
the switch returns to work but hibernation no longer works and if the screen of the PC goes into standby by moving the mouse or pressing both buttons it never recovers . I have to turn off the computer by holding down the button.
I've done several searches for the web, even within the forum but have not found the solution.
Will you help me ?
Sorry for my English.Sorry for the delay!
I am Italian and hp does not offer more support than this forum.
How should I do? -
[WORKED AROUND] Installing Arch Linux with 3.11 kernel on Vaio Pro 13
Yesterday I received my Sony Vaio Pro 13.
The WLAN card is only supported since kernel 3.11, which has been released by Linus several days ago.
The laptop has no ethernet port, ideally I'd thus use the WLAN abilities using installation.
Since there is no Arch ISO available with 3.11 yet, I was hoping to create my own, using the arch wiki guide on remastering the ISO: https://wiki.archlinux.org/index.php/Re … nstall_ISO
I was wondering whether, instead of compiling my own kernel, I could just chroot into the unpacked ISO filesystem and install the 3.11 kernel from the testing repository using pacman.
Which, as far as I could tell, was the released kernel, and not an earlier RC. Is this possible?
One other question remains: the author of this blog mentions a diff that is needed to prevent the CPU freq to be stuck at 800Mhz (http://elouisyoung.blogspot.se/2013/07/ … -with.html).
Does anyone know whether this made it to the mainline?
# UPDATE
I explored the latest kernel release and found out that the patch is not yet included in the mainline.
So I'll have to compile my own kernel. There are however still issues with the CPU freq scaling (won't scale lower than 1.6Ghz). Nasty...
# UPDATE 2
Booting + installing mainline ISO, installed testing/linux for wifi, compiled own kernel + installed besides the testing/linux kernel worked fine for me.
Last edited by A.J.Rouvoet (2013-09-08 17:21:05)Yesterday I received my Sony Vaio Pro 13.
The WLAN card is only supported since kernel 3.11, which has been released by Linus several days ago.
The laptop has no ethernet port, ideally I'd thus use the WLAN abilities using installation.
Since there is no Arch ISO available with 3.11 yet, I was hoping to create my own, using the arch wiki guide on remastering the ISO: https://wiki.archlinux.org/index.php/Re … nstall_ISO
I was wondering whether, instead of compiling my own kernel, I could just chroot into the unpacked ISO filesystem and install the 3.11 kernel from the testing repository using pacman.
Which, as far as I could tell, was the released kernel, and not an earlier RC. Is this possible?
One other question remains: the author of this blog mentions a diff that is needed to prevent the CPU freq to be stuck at 800Mhz (http://elouisyoung.blogspot.se/2013/07/ … -with.html).
Does anyone know whether this made it to the mainline?
# UPDATE
I explored the latest kernel release and found out that the patch is not yet included in the mainline.
So I'll have to compile my own kernel. There are however still issues with the CPU freq scaling (won't scale lower than 1.6Ghz). Nasty...
# UPDATE 2
Booting + installing mainline ISO, installed testing/linux for wifi, compiled own kernel + installed besides the testing/linux kernel worked fine for me.
Last edited by A.J.Rouvoet (2013-09-08 17:21:05)
Maybe you are looking for
-
Hi, I have uploaded some images in apex to use that in my application now i want to call them in certain area's where i would require i am using to call a image in a navigation bar region the image name in home.png i am getting the image name in the
-
Is there an easy way to replace/swap assets?
I output my short from Avid, ran it through Compressor, and made a DVD in DVD Studio Pro. Now I've done some re-cuts and want to create a DVD of the new version, using the DVD Studio Pro file I used for the last DVD. Is there an easy way in DVD Studi
-
Java console errors with jre 6u51 in firefox
Why do I get these errors 3 times in the java console? ( forms 11.1.1.4 ) Missing Permissions manifest attribute for: http://machine:9001/forms/java/frmall.jar Missing Codebase manifest attribute for: http://machine:9001/forms/java/frmall.jar
-
SMTP ERROR :Internal error: CL_SMTP_RESPONSE ESMTP
Hello Guru's, I have configured smtp to make use of mail service from sap . only outbound service. after configuring all the settings when i attempt to send mail , recieving error message. Error message: Internal error: CL_SMTP_RESPONSE ESMTP error c
-
Hello! Does anyone out there have any tips or tricks with how to deal with total loss of sound suddenly on an IPAD One 64 g? Also, anyone experiencing total blacking out while using an IPAD One? It happens as I am reading off the web, emails, and whe