Hi Is it possible show in ODLN PLD a written 'TOTAL AMOUNT IS:'...

Hi
Is it possible show in ODLN PLD a written 'TOTAL AMOUNT IS:' + (variable 91)
only when ODLN,peymethed is a well specified value.
Thanks,
marco

Hi Fidel,
Thanks for your message but my problem is that I have 5 differents values for ODLN.peymethod and I want that a special written appear on delivery document only when 1 of above value peymethod is selected. In basic I'll wrote an istruction like:
If (ODLN.peymethod='my specified value')
THEN
variable XXX='TOTAL AMOUNT IS: '+string(VARIABLE 91)
else
variable XXX=' '
end if
could you help me to write something similar, valid for SAP PLD, to abtain a solution to my question.
Thanks

Similar Messages

Hi All Experts , In PLD's Doc total amt in USD shud be convert in words

All Experts,
As per Client requirement in document printing they required Document total amount in words.
I am able to convert in total amount in words but main issue is its shown proper if document in US Dollar amount.
Can i make amounts in words in Upper case.
Pl give me solution for these issue.
Thanks
Milind

Hi milindpv,
yes, correct.
It is possible on SAPB1.
IF you need to print the Doc. Total in words.
Try this,
->> Open the require PLD.
->> Create 1 Database Field in Page Footer.
for example,
Convert of A/R Invoice Doc.Total in Words.
Table -> OINV - A/R Invoice.
Cloumn -> DocTotal
=>> Goto Properties Window and Select the Font( Showcard Gothic ) at Format Tab.
=>> put the Tick mark in Sum in Words at Format Tab on Properties Window.
Save and Run the Print Preview.
OR
->> Create 1 Formula Field in Page Footer and
->> Copy Doc.Total FieldID in PLD and Paste in Formula Field.
=>> Goto Properties Window and Select the Font( Showcard Gothic ) at Format Tab.
=>> put the Tick mark in Sum in Words at Format Tab on Properties Window.
Save and Run the Print Preview.
Regards,
Madhan.

My total amount of DOWNLOADED APPS. do NOT show up on iPhone HOME pages.

My total amount of DOWNLOADED APPS. do NOT show up on iPhone HOME pages.
I have the BIG DOG 16 gig iPhone and I am only limitted to 9 pages of APPS.
For what I PAID for this GREAT Phone, there should be NO LIMIT as to how many APPS. that I can download until and UNLESS my memory is FULL, which it is NOT even half full yet.
APPLE: Please change this LIMITATION, because there seems to be thousands of APPS. to choose from. Just as you have NO-LIMIT on the number of songs that I can download, I would like it to be the SAME for my APPS.
Thank you.

This ***** badly
http://discussions.apple.com/thread.jspa?threadID=1807300&tstart=0

Po list showing the total amount with advances given & open GR quantity

Hi Gurus,
My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
Regds
Prashant Bijutkar

Prashant,
All three informations will not be available in one report(gross total amount not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
You have to dovelop this report. please take help from technical consultant.
One more thing the open GR quantity will always at PO line item level not at header level.
Regards,
Manish

Is it possible to have 2 separate accounts with totally different and independent music on the same computer?

IS it possible to have 2 separate accounts with totally different music libraries on same computer with multiple iPods synced to the computer,

Same answer as last time you asked the same question.
Can I create 2 separate itune accounts on same PC?

I just downloaded itunes 11.. and now i cant find out how to display duplicates and also it doesnt show the total amount of songs in my library...anybody know..???

I just downloaded itunes 11 and now i cant find the display duplicates..and it doesnt show the total amount of songs in my library..anybody know..??

Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
tt2

Summary filed to show the total amount

Hi ,
Version : Jdeveloper 11.1.1.5
Table : Revenue ( Columns - RevId ,InAmount, OutAmount)
Based on the Table i Created Entity Object and Based On Entity I Created View Object (RevenueVOW)
I Created one method --> RevenueVOW to show Create Mode and 4 new Records to show
how i will create summary field to show the total amount on InAmount
( In forms and reports we will create formula column)
Thanks
shk

HI,
Did you try with groovy expression
Check
Sum of field in af:table

Oracle 9i Report - Show Total Amount On Page Footer

Hi,
Hope someone can help me with this.
I'm using Oracle 9i reports.
I've created a report which has many columns. On the last column is the amount.
How can I display the total amount on each page ?
I used the wizard to create the report. It can only display the total amount on the last page.
Any idea is appreciated.
Tq
Madi

Thx for ur response.
I have a nother question.
I have set the total to reset on every page.
Therefore, the total on page 1 displays the total amount of the column for page 1. Then the total on pg 2 displays the total for pg 2. and so on.
Actually, this is not what I want. I want the total on page 2 to display the total of page1 and page 2. The total on page 3 to display the total from page 1 - page 3. and so on.
Is it possible to do this in Oracle Reports 9i ?
Thanx in advance for ur response. Very much appreciated.

My mail inbox is showing Load More Messages - 5 messages total - 5 unread

My mail inbox is showing Load More Messages - 5 messages total - 5 unread. When I select Load More Messages it starts to do something then stops. I do not seem to be able to access these unread messages. Can anyone help me with this annoying problem?

This is my basic, first start, recommended "fix" when these types of weird, unexplained things occur on the iPad. Give it a try. After you reboot, go back to the mail app and see if the messages will load.
Quit the mail app completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My iPhone is not responding, it dosen't start. it is american and i'm in Brazil. it is locked with the screen showing the connector immage with written itunes.

My iPhone is not responding, it dosen't start. it is american and i'm in Brazil. it is locked with the screen showing the connector immage with written itunes

my iphone is not responding nothing comes on screen i wish u will give respond fast
i buy it from america and now i am using in india
today iam in bus that time i am using it when i acme to home it give no response

How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

Hi ,
How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
Can somepone reply for this asap ?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

Price not showing in Delivery PLD

Hi
In delivery PLD i am showing price using system valriable 84 . Local Currency is INR , System Currency is US$. But it is not displaying anything. What is the differnce between Total (LC) & Total(Doc).
Secondly when BP Currency is INR then in delivery rows it shows Total(LC) , if BP Currency is US$ then in delivery rows it shows Total(Doc) . why is it so
Thanks

Hi,
For your requiement pls select the Field unitprice. to display the price in the Pld.
Regards
Chidambaram

Transaction or report for showing partitions and total amount in BW 3.5?

Hello,
I want to fulfill a unicode conversion of a BW 3.5 system and found out, that this system has some tables with plenty of table partitions (700-1200). To calculate the table splitting it would be very helpful if there is a transaction or report where I can enter the name of a table and the result will be the amount of partitions and the calculated sum of all partitions including the header table.
Does this exist in a SAP BW 3.5 system?!
If not, are there useful alternatives?
Thanks in advance

Hey you two,
Yes, I know already DB02 and I used it to show a list with object type "TABLE PART*". But then, I get a list of ca. 4900 table partitions. I just want to have a list looking like:
/BIC/B000637000 155 Partitions 106,0 Gb Whole Size
I don't want to know the partitions themselves, but the amount and the header table - and of course the whole size. Is that also possible with DB02?

Sales Order Report Showing Cost on the Sales Order & total invoice dollars

I am looking for a report in SAP that shows you the Sales Order number, the cost on the sales order (NOT the average cost) the actual cost on the sales order detail line and then the total invoice dollars in month to date and year to date?
Thanks,
Linda

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

SSAS Cube Total Amount showing correctly but monthly split up is wrong

Dear All,
I have created two dimensions "Detail Fields" and "Time Period" from named query.Report Amount is the measure group.
Our report is generated By Dropping the Prime Supplier in row fields,
Report Year in Column Fields with Report Amount in the Data Region. Please see the below output.
Report Year
2011 2012 2013
2014 Grand Total
Prime Supplier Report Amount Report Amount Report Amount Report Amount Report Amount
Test01 $1500.00 $2500.00 $1520.50 $2540.00
$10,000.00
Test02 $2980.00 $1240.00 $5210.50 $5410.00
$15,000.00
The issue here is the Grand Total for every supplier is fetching correctly (i.e $10,000 and $15,0000 is correct for each supplier), but the split up for every year is incorrect (i.e 1500,2500,1520,2540 for the Supplier Test01) . I don't understand why its
showing the wrong split up. May be Using of complex named query or any relationship to be created if we are using named query or any other settings or any other reason.
Also if the record count is less we are not facing any issue, the amount is splitting perfectly for every year, but in production there we have millions of records hence the amount is splitting wrongly or the problem with the complex
named query if needed i can paste the query used.

Okay guys, let me share what went wrong. The problem is with cube-dimension relationship. After fixing it the value showing correctly.

Hi Is it possible show in ODLN PLD a written 'TOTAL AMOUNT IS:'...

Similar Messages

Maybe you are looking for