Hi, is it possible to create different application folder for a different drive?

Hi,
My OSX is 10.9.5, processor speed is 1.8GHz i5, 4 GB 1600MHz DDR3, MacBook Air Mid 2012.
I have partitioned my drive in two.
Itunes was previously saved on MAC HD, but due to lack of space i would like to shift it to MAC HD 2. So, i removed Itunes from MAC HD saved all my media on a hard drive. I downloaded the .dmg file for Itunes and would like to save it on MAC HAD 2.
I have noticed that you need drag and drop Itunes in the APPLICATIONS folder, which by default saves it on MAC HD.
THE QUESTION
CAN I MAKE AN APPLICATION FOLDER FOR MAC HD 2, SO I CAN INSTALL ITUNES ON IT OR IS THERE SOME OTHER WAY?? (IN SHORT I NEED 2 APPLICATION FOLDERS)

My OSX is 10.9.5, processor speed is 1.8GHz i5, 4 GB 1600MHz DDR3, MacBook Air Mid 2012. I have partitioned my drive in two.
That doesn't give you any more disk space. it just limits the storage on each partition to 1/2 or less of what was on the unpartitioned drive. What you need is a portable external HD like this one to put your iTunes library (and other seldom used files) on and run from there.

Similar Messages

Is it possible to create a hot folder for batch processing?

I know that it's possible to make a droplet for preflight, but is it possible to create a droplet or a hot folder for another batch processes (mine crops the pages)? Or at least make a keyboard shortcut? It's so unproductive to go Advanced>Document Processing>Batch Processing>Run>Close (Adobe spoiled us with custom shortcuts in other programs)...

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

Create a smart folder for images imported "TODAY"

Is it possible to create a smart folder for images imported today? The only close option I have been able to find is by selecting the "import session" option, but that forces me to select from a series of sessions that have already been imported. I'd like to be able to have a single folder, day after day of what I imported today almost like the iPhoto "last roll" folder. Possible?

There is a Filter Rule "Import Session" but as implemented (as you discovered) it isn't easy to use.
What I do is:
. add "Import Session" to the "List -- Expanded View" Metadata Overlay
. click "Photos"
. change to List
. change to Expanded Overlay if needed
. click the column header "Import Session" (note that this adds "Import Session" to the sort drop-down)
. change back to Grid view as needed
I use this to confirm imports, and to find any that I mis-placed.
HTH.
Message was edited by: Kirby Krieger

Is it possible to create group above report between to different data model

Hi,
I am having one problem.. I am working on Bi publisher 10...
I have to create 2 different data models.. which i have done successfully.... its showing xml data perfectly.. but my problem is i want my 2nd data model to be dependent of 1st model...
when i am designing my template ... i am not able to create a group by report..
i want my report like this ...
------------------------------------------------------------ (fetching data from first data model)
abc xyz pqrs
--------------------------------now their it must show the data from second data model... dependent on first model...
simply i want to know is it possible to create group above report between to different data models..

Thanks for your response..
I already tried this.. But its not working ..
i want parent information from data model 1
then all detail information related to parent template ...from data model 2..
but its not working.. its giving me all parent informations first then all details informations..

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

Creating a application dynamically for a component

Hi,
Does any one know how to create an application dynamically for a component, so without using SE80?
I already found class cl_wdy_md_application, but I do not know if this is the right direction. Maybe somebode already solved this issue.
Regards,
Remco

Hi Thomas,
In SRM it is possible to call own made webdynpro components and fill them with data, and then process these data into a new shopping card. This can be done by filling a so called HOOK_URL. In SRM you have to do customizing and fill in the URL to be used of the WebDynpro application. So far, still no problems.
I have built a component by which an user can fill several Z tables and then he can display a form he has made by himself (a so called free order form). So the component will check all Z tables, and generate in one view, the context dynamically as also the layout dynamically. In all Z tables one field has been used as one of the keyfields and that is free order form name and this is also a parameter of the application so that this application knows which data to get from the Z tables to generate a form.
And because it is possible to generate more then one forms, I have create per form 1 application with the specific parameter, and this URL can be entered in the customizing of SRM.
This application creation I did myself, but now I want to accomplish, when the user creates a new form by filling specific tabels via webdynpro, that he can generate the application by himself.
Maybe I can create a FM/BAPI for the BDC recording and then call this from my web dynpro application as there is no API.
Do you maybe have another solution?
Regards,
Remco

Is it possible to create many primary key for a table?

hello sir/mam.
i am selva, i am new to abap,
is it possible to create many primary key for a table?
please guide me.

Hi Selva,
Many Primary Keys = Composite Key.
i.e some set of columns will enable you to identify a unique row from a set of rows in the table.
This can be achieved by checking the primary key check box in se11.
Hope it helps.
Regards,
Maheswaran.B
Message was edited by: Maheswaran B

This workflow cannot be imported because it was created in SharePoint Designer for a different Site

Hello everyone. I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
"This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
drawing."
So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production. I've put quite a bit of time into one
particularly and would like to export/import rather than re-created from scratch.
I've successfully created the form template and imported. This created the necessary list items nicely and the form appears to work as expected. However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
error. If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
is lost. I need to be able to overwrite/merge the existing workflow with the import. Any suggestions?
One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
light on the subject. Thank you.
Adam Tyler

Hi Adam,
Here is a blog talk about the same issue would be helpful:
http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
Best Regards
Dennis Guo
TechNet Community Support

I was going to install Rosetta Stone Spanish onto my Macbook but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive; is it possible to put the application onto the external hard-drive to save space on my mac?

I was going to install Rosetta Stone Spanish onto my Macbook 10.6.7 but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive, and I was wondering if it is possible to put the application onto the external hard-drive to save space on my Mac?

I think you're confused about how much hard drive space you have. You probably have 2 GB of RAM... there hasn't been a Mac shipped with only a 2 GB hard drive in a while. At the bottom of any Finder window, how much space is available?
If you're actually running low on space, you should move documents to the external drive, since many applications want to be on the system drive.

System should create only one delivery for 100 different PO's in STO

Hi All
i need help
Plant B raising 100 different po's daily for different materials to Plant A.(STO)
Now Plant A will do Dilivery via VL10B.
Here my requirement is system should create only one delivery for 100 different PO's and delivery should contain all the
materials as line items bcause system should not create 100 deliveries( time consuming process).
Here there is no manual transaction for VL10B.
That is system is goining to excecute the VL10B automatically, there is no manual transation for VL10B
How can we do this?
Thanks
MSK

Hi
We can able to do your requirement
1. All the STO materials should have same sales view in materials for the *Unique)following field: Loading group, shipping Point, so on..
2. In the config, hope we have do the combine delivery setting for VL10B
Regards
Prasanna
Edited by: Prasanna Raju on Feb 17, 2010 1:52 PM

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

Is it possible to create an inbound delivery for STO in a 2 step process ?

Hi Experts,
Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
Let me know in case if that is not possible.
Thanks,
Nitin

Hi Tao,
I did that also, but it did not work.
Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
Anyways, thanks for your help.
Regards,
Nitin

Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

Moving iTunes Mobile Applications folder to an alternate drive

I found out how to move the iTunes Mobile Applications folder to either an external drive or as in my case, from my 256GB SSD systems/application drive to a non-SSD drive on my desktop (3.0 TB in size). This is important for any iTunes users with their systems/applications on a SSD drive (i.e. on the C: drive but with constrained SSD drive space). In my case, my Mobile Apps folder is 40+ GB in size.
iTunes allows you to easily move your iTunes music folder to an alternate drive but it does not provide a means to move the Mobile Apps folder. I have confirmed this. However, in Windows Vista, 7 and 8, using the “mklink” command, you can set up a symbolic link from the iTunes Mobile Apps folder on the C: drive to the relocated Mobile Apps folder on another drive. iTunes thinks it is adding new Mobile Apps to the C: drive Mobile Applications folder, but it is actually updating the real Mobile Apps folder on the alternate drive. I’ve tried this approach and it works like a charm. The steps required are as follows:
1. Copy the existing Mobile Apps folder and its content on the C: drive to its new location on an alternate drive on your desktop or to an external drive.
2. Note and record the exact detailed path to the existing Mobile Applications folder as well as the exact detailed path for the new Mobile Applications folder
3. Delete the existing Mobile Applications folder (You cannot create a symbolic link to a directory that already exists on that same drive)
4. Open a Command Prompt (admin) window on your desktop. On Windows 8, this is easily done by right clicking the start icon on the bottom left of the desktop screen and selecting the Command Prompt (admin) option.
5. change directory to C:\ (i.e., enter cd c:\)
6. enter the mklink command and press enter (format mklink /d link_address target_address) for my Windows system this looked like the following:
mklink /d "C:\Users\Marv\Music\iTunes\Mobile Applications" "D:\Music\iTunes\Mobile Applications"
This command recreates the Mobile Applications folder on the C: drive in the exact place it was before, but only as a pointer to the real folder on the alternate or external drive. The link is transparent to iTunes and my 40+ GB Mobile Applications folder can be on a large drive rather than on my 256GB SSD systems/applications drive.

It requires elevation. If you find the command line application (cmd.exe), right-click, run as administrator, and paste the command, that will work.
However, this technique, which worked for me in the past, seems now to be failing. All new downloads are in the root of iTunes Media. The bizarre thing is that iTunes thinks it has put a downloaded file in the correct folder, so says it cannot play it, and if I move it manually to the correct folder, iTunes sees it without problems. I've tried mklink /d and mklink /j, neither works (the former shows the redirected target pathname, the latter behaves as if the target path is actually part of the native directory structure).

Hi, is it possible to create different application folder for a different drive?

Similar Messages

Maybe you are looking for