Hi iwant to execute the 4 reports at one time
Hi Friends,
Actuall iam getting one issue as they r given 4 reports
So finally is there any solution for executing these 4 reports at a time and at the same time pls provide the logic also
Thaks & Regards
Mohan Reddy
Duplicate post
Reported to SCN
pk
Similar Messages
-
Hi iwant to execute 3 reports at one time
Hi Friends,
Actually iam getting one issue as they r given 3 reports so iwant to execute the 3 reports at one time ie... i waant to execute the two reports from the first one ok
So iwant the solution for this one so pls provide the solution and at the same time logic also pls
Thanks & Regards
Mohan Reddy>
Partha sarathy wrote:
> Rewards if useful.
NO.
Reason here [stated|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] -
Error while executing the report FAGLB03
Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
VenkatHi,
Please refer the below note.
1361304.
Reg
Madhu M -
TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report
Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
LaxmanHi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran -
Message "No applicable data found" after executing the report
Hi all,
I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
Can any one please explain me what to do to bring data when the report is executed?
When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
Please advise what do I need to do inorder to get data when the report is executed?
Thank you.
Regards,
Pavan.I think so.
Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
Company code,
Customer and
Period/Fiscal Year
Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
I tried with values in all the fields that are available in cube
co. code - BP01
Customer - PCS-C10
Period/Fiscal Year - 2008011
Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
Fiscal Year Period,
Posting Period,
Fiscal Year Variant and
Fiscal Year
I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
Please advise.
Thank you.
Pavan. -
Hi i want to execute 3 reports at one click without user interaction
hi Friends,
Hi i want to execute 3 reports with one click ie by putting radio button when we click on this this wants to execute all 3 reports with out user interaction pls try to understand and provide the solution pls
Thanks & Regards
Mohan ReddyHello,
To achieve this you can use the SUBMIT command after an user action.
Example
The program report1 has a stand-alone selection screen with the screen number 1100. In the program report2, an internal table with row type RSPARAMS and a ranges table are filled for this selection screen. These are transferred at SUBMIT together with a single condition.
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text TYPE c LENGTH 10,
rspar_tab TYPE TABLE OF rsparams,
rspar_line LIKE LINE OF rspar_tab,
range_tab LIKE RANGE OF text,
range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'H'.
APPEND range_line TO range_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
WITH SELECTION-TABLE rspar_tab
WITH selcrit2 BETWEEN 'H' AND 'K'
WITH selcrit2 IN range_tab
AND RETURN.
Regards. -
Performance Problem when executing the report for the first time.
Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran. -
Need a Syatem variable for Executing the report by RFC.
Hi Experts,
Need a Syatem variable for Executing the report by RFC.
what i mean to say is,i can execure the report directly ...then no issues.
But if i execute the Report by RFC ,then i should put a condition with system variable...
Please suggest me ,how can put a condition when i am executing the report through RFC.
Thanks
BabuHello Friend,
what I understood that you want to put some extra condition if that report is getting called from RFC...
you can use the system variable SY-CPROG....it will hold the value of the report when it is geeting executing directly...
but when it is getting executed therough RFC...it will hold that RFC name...
Thanks
Krish -
Getting different result while executing the report by debugger
Hi All,
I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
Without debugger result is
a
b
c
With debugger i am getting result as
a
d
e
f
What may be the reason . Kindly help.
Thanks in advance.
S.VelsankarHi,
you mean you have'nt change anything while debugging and results are different when ALV is displayed?
I don't really understand your issue... Could you give more details?
Kr,
m. -
Button on toolbar after executing the report i.e. after result display
Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.hi
if you are using alv than just pass 3 values to function call
I_CALLBACK_PROGRAM = SY-REPID " program name
I_CALLBACK_PF_STATUS_SET = 'STATUS' "PF-STATUS
I_CALLBACK_USER_COMMAND = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine -
Error while executing the report to display on the web in BI 7.0?
Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance. -
Executing the report in the background
Hi Frnds,
I want to execute a report in background.After executing the report I want to receive a mail.
I think this is possible through reporting agent.
so i need the steps for this how to do...pls do the need ful..waiting for reply..
Thanks and Regards
Rajasekar.Hi,
there are two parts of it -
a. you have some exceptions & you run report in background & are informed if exception occurs, for that kind of scenario look at -
http://help.sap.com/saphelp_bw33/helpdata/en/d3/a850390aa3b608e10000000a11402f/content.htm
b. Without exception you can play with WEb template & get informed -- I am not very sure.see this --
http://help.sap.com/saphelp_bw33/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
If you are on BW350, it can be achieved by Information Broadcasting feature. see this -
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Hope it helps
regards
VC -
How to know the User name and date, who executed the report last time.
Hi All,
We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
Is there any table to look ? or is there any process ?
Thanks,
Ravi.Ravi,
Use SE16 - then look at rszcompdir.
We look up Version = 13 for queries.
Regards
Gill -
Portal asking for Login details again while executing the reports
Hi Team,
Our Portal is asking for Login details again while executing the reports individually.
The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
PLEASE ADVICE ASAP.
thanks & regards
SnehaHi Kiran,
I have recently taken up this portal.. so not clear on the structure.
however, I observed there was no user mapping available.. so i added the same with my login credentials..
stil the issue persists.
Please advice.
Sneha -
Can we execute the Reporting while the data is loading into that ODS/Cube.
Hi Friends,
Can we execute the reports on particular ODS/InfoCube in the following cases
1) When the data is loading into that ODS/Infocube.
2) When we are Archiving the data from that ODS/Infocube
Thanks & Regards,
Shaliny. MHi Shaliny,
First of all you are in the wrong forum, in Business Intelligence Old Forum (Read Only Archive) you will find better support.
In case you are loading data in an infocube you will be able to have report only until the request that has the icon ready for reporting filled. In case of an ODS object i don't think you will be able to have valid reporting since the ODS data firstly needs to be activated.
Nevertheless please post your question in the above link.
Kostas -
How to make more than one person can access the database at one time
how to make more than one person can access the database at one time
Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.
Maybe you are looking for
-
Iphoto 6 photos not showing at all
I have been using Iphoto 6 for a while now and after I updated the software, most of my pictures show up as grey boxes with an exclamation mark on them. How do i see my pictures?? When I double click on the pictures that are actually seen, they pop u
-
My iPhone 5 restarts after a while
Hi, I am having this problem since today, 2 days ago my battery run out and I didn't have any charger. Today I charged the phone and it keeps restarting, during the charging process and even after it. It looks like something fails, the display shows
-
Internet Explorer error when running my demo
I created a demo, an interactive software simulation and a quiz in Captivate. I published it and then zipped it up and took the zip file over to the media folder in Microsoft's LMS or LCDS. When I preview or run it, I continually get Internet Explore
-
Lost ability to lock phone after dealing with desktop
I didn't realize that I selected the desktop to restore my phone until too late. Now I lost the lock icon to lock the phone. Any suggestions? Solved! Go to Solution.
-
IPhoto "importing" spurious non existing photos
iPhoto constantly tries to "import" 2 non existing photos every time it opens. I tried import as an answer to the - do you wish to import? question as well as No in answer to the annoying start-up question, but all to no avail. How do I stop this ann