Hi, just bought an Idjay system and I can't get it to work with any of the following: I tried iphone 4s but it has IOS7 so the phone is not recognising when I am plugging the system in I have tried ITouchs,phones
I have bought a Idjay system and I have the App on the 4S phone however the phone is not aknowledging the system. After googling we found that their is an issue with IOS7 for this system. So we tried an Itouch, its on IOS6 but doesnt work. Then tried an Ipad but the first version. Thought we had success when the Ipad seen the system connect to it. However I then went to download the App onto the Ipad but it needs IOS6 onwards and as its the first model of the Ipad the latest version is 5.1.1 so I cant download the App...
Any suggestions? do you know how to get the 4S phone to work with it as that would be the ideal scenario?
Thanks in advance
They said that there shouldn't be any reason for it not to work. I bought it off ebay and the previous owner used it on the same devices that I am
Similar Messages
-
I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie -
I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!
you launch QT then go to its REGISTRATION
-
i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?
Care to share which OS you are using?
-
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues. -
HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?
I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???
If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao. -
I was trying to update my ipad operating system and I thought it was done. When I disconnected it from my computer the ipad went blank then the apple logo appeared midscreen with an elongated oval across the screen under it. Now nothing on the ipad works. I think it was backed up on my computer but I can't find anything that will allow me to sync the two or regain functionality on my ipad. Any suggestions?
Hi,
I would put the ipad in recovery mode and redo the update, once that is done you could restore the ipad from your backup and you would not lose any data.
http://support.apple.com/kb/ht4097
Ricc -
While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.Try this
iOS: Device not recognized in iTunes for Windows -
Hi, we just bought a Macbook air and we can't find the 'reminders' app in the applications or through the spotlight search. Is there a link to download the app? I can't find it online or through the app store. Please help!
Reminders is automatically installed with 10.8 or above. A new Mac should have 10.9; it's possible that, with a third-party vendor, you have an earlier OS. Check under the Apple menu in the top left and click About This Mac. That will tell you what version of OS X you have.
Matt -
hi i just bought a iMac 24'' and i can't seem to load the cd drive it doesnt do anything!! can anyone help?
thanksThe last 24" was a 2009 model and they started in 2006, so which one is yours?
Here is a list of all 24" models:
http://www.everymac.com/search/search.html?cx=partner-pub-8015755554271706%3A2ho jc0-6s67&cof=FORID%3A11&ie=ISO-8859-1&q=24%22+imac&sa=Search&siteurl=www.everyma c.com%2F&ref=&ss=2299j974627j9
All of them had a built in Superdrive. It could be dirt (easy fix) or a malfunctioning mechanism (happened on mine) - in that case, it would have to be replaced and you may be better off getting an external drive (less expensive).
And, you said it has 10.8.5 installed? Did the seller give you the original install DVDs? You will need those sooner or later. -
I just bought a new 4s and I can't send or receive texts. Also when anyone calls it comes up as "unknown" but I transferred all my contacts. Is this a device issue or a carrier problem?? I've tried everything. Reset the network and some a hard reset but no changes.
I believe the root cause is IOS5.01. same problem on my iphone4s with IOS5.01. Now I have a expensive I-touch! wake up steve.............. I suggest you change your sim cark from 64k to 128k. or just waiting next generation IOS.
-
I just bought a new 4s and I can't activate using cellular connection, what is wrong?
I just bought a new 4s and I can't activate it using cellular connection and Wi-Fi and also I can't seem to get the iTunes connection option from my phone as well. What can I do?
posted in error.
Message was edited by: Radiation Mac -
i just bought a new Mac, and i cant seem to update to Mountain Lion, any idea's as to why? also i can not seem to download pages from the app store, any idea's on why, please help!!
You need to describe more clearly what you are trying to do and how it is failing.
Was your mac new, or just new to you? What OS did it come with? Lion? Snow Leopard?
Have you already bought Mountain Lion? If so, are you using the same Apple ID that you used for your purchase?
What are you seeing in the App Store? Come to think of it, are in the MAC App Store? (not to be confused with the iTunes App Store!).
If you give answers to these questions we may be able to help! -
I just bought a macbook air and I can't open any of my downloaded apps in itunes
I just bought a macbook air and I can't open any of my downloaded apps in itunes. They also keep trying to download to my iphone 4 s but only half of them will download, the others say waiting. thanks.
iOS apps will not open in iTunes. iTunes will sync your downloaded apps to your iOS devices (iPhone or iPad) only.
1. Login into your iTunes account
2. Authorize your Macbook Air
3. Download all your purchased apps to iTunes
4. Sync with your iPhone. -
..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.
Good day,
How can I help?
Kind regards,
David
Adobe Systems
Maybe you are looking for
-
How to install Mountain Lion on my macbook pro MB990LL/A 2009?
Hi, I have a big problem here.. I saw on internet that many people have installed on they're macbook pro MB990LL/A an OS like Snow Leopard, Lion, Mountain Lion. This weekend, I've tried to install Snow Leopard, and when I've inserted the disc in my m
-
FLV file not opening up in media encoder
I am on a unique job where we are trying to figure out our workflow for video live and on-demand production. Basically, we will be streaming live video during the day and then we would then like to post the video that just went live and have it avai
-
How can I access Advanced Javascript Settings?
I'm aware that, in recent versions of Firefox, the ability to disable Javascript has been removed. I don't intend to re-open discussion of that particular decision. But removing that option has also removed access to the Advanced Javascript Settings
-
IDOC Mapping ; Error CX_XMS_SYSERR_MAPPING
After we transfered an IDoc 1:1, w/o mapping, successfully from one to another SAP system, we added a mapping like follows: 1. created a message mapping per drag&drop from imported objects - IDocs, using a 1:1 mapping (no field changes, just for test
-
Hi i am struglling in this i create 3 reports monthly,qurterly,yearly one prompt month,year if we select month year then like nov 2012 1st report show upto nov2012 2nd report show quarter sum upto nov2012 year show previous years,2012 like 2012,2011,