Hi, kindly let me know the mode of payments for apps from apps store applicable from India.

The valid payment methods should show on the payment details screen on your account - in India they are Visa, MasterCard and AmEx
Credit cards of those types should work, if you try to use a debit card then it might not be accepted, not all debit cards appear to work in India e.g. Re: can i download from itunes using debit card in india ?

Similar Messages

Kindly let me know the Tcodes for the forms below in MM

Hi Guru,
Kindly let me know the Tcodes for the forms below in MM
Form - Deviation Request form
Form - Spot PO (direct, indirect, subcontracting)
Form - Purchase Scheduling Agreement (direct, indirect, subcontracting)
Form - Contract (direct, indirect, subcontracting)
Form - Delivery Schedule (Long + Short term)
Form - Vendor Non-Conformance
Thanks
Siva

Hi,
You can get all the forms & output devices in the Transaction code.NACE.
you can check forms,program, for other modules also.
Regards
Ravi shankar.

Kindly let me know the transaction for checking the Status of par.User?

Kindly let me know the transaction for checking the Particular Users Status?
I mean to say,Which Transaction is he into?
Or Is he/She Logged on to a particular System?
Regards,
Shashank.

Hi,
Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
Regards,
Sujit

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

Dear Guru's Please let me know the T.code's for the fallowing

Dear Guru's,
Please let me know the transation codes to see
List of Open sales orders based on the delivery block (other than VA05)
List of invoices not yet realesed to account.
List of Invoices which are not cleared(for which f-32 not happend)
List of deliveries for which PGI happed not invoiced.
Regards,
Madhu
Highly rewarded

Dear Madhu,
List of Open sales orders based on the delivery block (other than VA05) - VA14L
List of invoices not yet realesed to account. - VFX3
List of Invoices which are not cleared(for which f-32 not happend) - FBL5N (Billing Type - BL against which Collection Doc. DZ is not found)
List of deliveries for which PGI happed not invoiced. - VF04 (not sure, as this is billing due list; and it may contain delivery doc. w/o PGI. Just check)
Please check with VL06F. Here, under Tab: Status: Outb. Delivs, there is field: Billing status
Maintain entry in to this field as "A - Not yet Processed"
Best Regards,
Amit

HAI SD EXPERS KINDLY LET ME KNOW

HERE ARE SOME INT QUESTIONS , KINDLY LET ME KNOW THE ANSWERS
1.In a sales order, if you want to give rs 10000 more than the credit limit to your customer how do you process this scenario
2.Mention some latest tickets L1 solved in ur support project
3.how will u configure batch jobs
4.what are the fields in purchase requisition
5.what is RMA process
6.how you will create nodes in customer hierarchy
7.suppose you want to offer two different materials as free for one material , how do u process this
8.you find terms of payment in two pages in customer master data, what is the role of the two
9.what is the difference b/n item cat group and general item cat group found in material master
10.what is the link b/n pricing procedure and credit management
11.what is as is & to be process
12.tell me about your experiences in support & imp projects
13. what do u know abt documetation and how u have done that in ur project
14.diff b/n user exits and enhancements
15.If the business offer diff rates on the material basing on the quantity, and the break up should appear in the sales order which carries the net value how do u customize this
THESE ARE VERY MUCH PRACTICAL KINDLY EXTEND UR HELP
KISHORE
[email protected]

1.In a sales order, if you want to give rs 10000 more than the credit limit to your customer how do you process this scenario
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and double-click on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
4.what are the fields in purchase requisition
http://www.olemiss.edu/projects/sap/Purchasing-_New_Required_Fields_on_PR_and_PO.pdf
5.what is RMA process
Return Materials Authorization
6.how you will create nodes in customer hierarchy
All the customizing is in SD/Master Data/Bussiness Partner/Customers/Customers hierarchy
1) Define hierarchy type: just put and ID and a name to the new hierarchy.
2) Set partner determination: if you want to user the hierarchy in price determination, then, in the orders, at the header level, you have to have a Partner Procedure with a partner function for each level. In the partner procedure, in each partner function you must indicate the source partner function. With this informacition, in the order, you obtain the bussiness partner for each partner function.
3) Assign acount groups: you indicate which accounts groups are allowed for being part or your hierarchy.
4) Assign sales areas: symple you indicate wich sales areas are allowed in your hierarchy. (Here you can customize common sales areas, just for not having to build de hierarchy in all the different sales areas).
5) Assigning hierarchy type for pricing: you indicate which classes of documentos uses hierarchy in pricing determination.
It is possible to maintain so called customer hierarchies. This might be useful when for example you create a condition discount for a customer that is part of such a hierarchy structure. All subnodes in the hierarchy below that customer, will thus receive the same discount.
Customer hierarchy setup, firstly decide the hierarchy type to be used.
The standard is type A.
You can also assign a partner function to the customer so that the higher level customer in the hierarchy is copied into a sales order as a partner function - but you don't need that right?
Next assign your customer account group to the hierarchy type. And enter the combinations that will be allowed for creating the hierarchy.
You want to assign a ship-to to a payer. So enter the ship to account group and enter the payer account group as the higher level.
You must also make an entry for permitted sales area assignments. So if you want to a hierarchy for customers in the same sales area then enter the sales area and enter the same one as the higher level sales area.
All these settings can be found in the IMG. Under SD - master data - business partners - customers - customer hierarchy
7.suppose you want to offer two different materials as free for one material , how do u process this
Free goods processing - Exclusive method

Let me know the BIW 7.0 flow

Dear All,
I am new to this BIW 7.0, before i was working with 3.0B. Kindly let me know the difference between this two. I could see here in the Modelling area Data Sources, DTP, Transformations and so many areas here. Let me know this flow in detail. Kindly help me in this regard.
Regards
Sathiya

Hi Sathiya,
1.     I want to know the difference between the transformation field in the data source and transformation field in the data target also.
[Anil]: Qn is not that clear, but just in case if you want to know about transformations then below are the links.
Transformations
http://help.sap.com/saphelp_nw2004s/helpdata/en/d5/da13426e48db2ce10000000a1550b0/content.htm
Routines
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/857adf7d452679e10000000a1553f7/content.htm
Difference in Transfer/Update rules routines to Transformations of nw2004s
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bd9b5be97c112ce10000000a11466f/content.htm
2.     Why there is a field in transfer rule in data source tree?
[Anil]: If you are in BI 7.0 you dont need transfer rule. You can map the fields in the data source to the data target with transformations. Right click the data target and choose transformations and give the data source name and you will be guided.
3.     What is migrate in the data source tree?
[Anil]: Below are few important points:
If you want to migrate your 3.x DataSource into a SAP NW 2004s BI DataSource, then use the inbound adapter functionality which will mean losing your DataSource, Transfer Rules and PSA. Bear this in mind if there is complicated logic within your transfer rules. You will need to migrate this earlier into a transformation. Then you can do the DataSource migration. This will mean a new PSA table will be generated. There should not be data in your PSA table when you do the migration, as it will be lost.
You do not have to migrate all your update/transfer rules to the new concept. You could still define update/transfer rules in SAP NW 2004s, although this is a little more hidden available via Additional Functions in context menu.
4.     What is data transfer process in data source tree?
[Anil]: Here is the Step by step process to create DTP -
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
5.     How to load master data is this same like 3.0b??
[Anil]: No, it is not the same. But for loading hierarchy we still follow the 3.x procedure. Below are the steps for loading master data:
1. Create the infoobjects you might need in BI
2. Create your target infoprovider-Infoobject
3 Create a source system
4. Create a datasource or use replicated R/3 datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process (DTP) from the datasource to the Infoprovider
8. Schedule the infopackage
9. Once successful, run the DTP to get data from PSA to Infoobject
10. Check Infoobject for data
loading Infoobject using Flat-File
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
6.     If we are taking from more than one data source then how we have to process?
     [Anil]: Below are different scenarios in using data source.
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Assign points if this helps.
Regards,
Anil

What the number to call for unauthorized IN APP purchases?

Does anyone know the number to call for "unauthorized" in app purchases? Freq asked questions don't answers my purchases questions.

Hi mbabecake,
Happy Holidays! The iTunes Store support is web based. The resources below will explain how to review your purchase history and report any issues. Click on the link below to get in touch with the iTunes Store Support team.
See your purchase history in the iTunes Store - Apple Support
http://support.apple.com/en-us/ht2727
Report a problem or request a refund for a purchase made within the last 90 days.
See your purchase history
Click to open your account in iTunes.
Sign in with your Apple ID. iTunes will open to your purchase history, and you'll see the items you purchased.
Alternatively, you can:
Open iTunes.
Click iTunes Store.
Click Sign In.
Enter your Apple ID and password.
Click your Apple ID and select Account from the drop-down menu.
Next to Purchase History, click See All.
It might take a moment for your Purchase History to appear.
To see the details for a purchase, click the arrow to the left of the order date. Your most recent purchases are first.
You'll see the date, time, and web order number in the top-right corner. If you don't recognize a purchase, see if it's one of these types of charges.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
You can use your email receipt to report a problem. If you use Family Sharing and you have an problem with a shared item, ask the family member that bought the item to report the problem using the steps below.
To report a problem with an item you bought, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the item you're having a problem with.
Enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having a problem with.
Select your problem from the Choose Problem menu.
Follow the onscreen instructions. You might be asked to describe the problem in a text field.
Click Submit and we'll review your problem.
I hope this information helps ...
- Judy

Kindly let me know how to customize ESS Screens

Hi,
I configured NWDI, created Track. I got all DC's in nwds.
I created a proj and opend it through WebDynpro. Each proj having min of 3-5 Components.
I hav seen all the component views. When i execute an application the output what i m gatting is different from what i hav seen views of different components
I didnt find frm wer this view is coming.
for eg, here i opened proj EPD_ESSDev_Dessinaddrsap.com
this proj is having below components
     CcPerAddressIN
                FcPerAddressIN
     VcPerAddressINDetail
     VcPerAddressINOverview
     VcPerAddressINReview
Kindly let me know how to customize this?
Regards,
Venkat

Hi Snehal
Here is the references,
WebDynpro Component :FPMComponent - com.sap.pcuigp.xssfpm.wd
Interface View :FPMComponentWindowInterfacView
Startup Plug :Default
But in my proj there is no component with the name FPMComponent - com.sap.pcuigp.xssfpm.wd
, then from where this is taking...
kindly guide me
ThankQ

I had IDM 7.3.10 Kindly let me know which version supports this IDM

Hi,
This is Naved I only use firefox and i have IDM 7.3.10 before it was working with firefox, i dont remember which version, by chance i updated firefox and the latest dosnt support IDM kindly let me know which firefox support this version of IDM .
Best Regards
Naved

hello, please refer to www.internetdownloadmanager.com/support/firefox_integration.html

Kindly let me know if there are special discount offers available for IBM employees ?

Kindly let me know if there are special discount offers available for IBM employees ?

Many companies have EPP (Employee Purchase Programs) with Apple. You need to check your benefits programs offerred by IBM. It will basically be a URL to an EPP login page for the Apple Store.
NOTE: I do not think there is any discount on iPhones.
I have observed that the discounts tend to be around 8% on Pro equipment and 6% on consumer products. But some items the discounts vary depending on the product. And in some cases there is no discount.
Again, check with your IBM benefits.

I am not able to open a javascript pop up mapped from RH 8. Kindly let me know an easy solution.

I am not able to open a javascript pop up mapped from RH 8 in IE and chrome browser . Kindly let me know an easy solution.
Thank you

Hi,
What output are you using? WebHelp?
If WebHelp, you may need to amend the way you call the help. You can add the option newwnd=false to ensure that RoboHelp doesn't open the help in a popup. See http://www.wvanweelden.eu/articles/part/regular-start-page for details.
Greet,
Willam

Could someone please let me know the best external hard drive for a Mac Pro 17 in. ? Thank you .

Hi,
I am new to the community and need advice as soon as possible . I have been using the iMac hard drive , but need a external hard drive to put on the Mac Pro and dont know what kind to get . Could someone please let me know the best for the Mac Pro ? I was told to get the 500 MB external back up , but when searching for it on the internet I saw different ones that had other things with the 500 MB . Some had 300 or 200 something else along with them and I dont know which to purchase .
I will appreciate more than you know if you could help me with this , as the Pro is needing backed up now.
Thank you ,

I appreciate all the great advice here , but all this is overwhelming to me , as you all are so intelligent with these things and this causes me to feel more dumb about a Mac than I was already .
I paid for a One on One to learn these things , but I have a Immune Disorder and wasn't able to attend one class , so its not that I didn't try , I am just not able to travel . I don't like asking others for help , but at this point I don't have a choice.
I called Apple store and was told to get a External Back-up for the Macbook Pro to back up the info. on the device in the event it crashed . And another reason was "they " said to get this was I have a 2 TB backup on the iMac desktop and that using it to back up things on the Macbook would take up all the space of the backup on the desktop . I hope I am saying these things right for others to understand me as I said I don't know much about these things , at all really . I am wondering if I should have ever bought these products as it seems they are much harder to learn than I thought . I do admire all the brains you all have here and wish I knew just a little of what you all know.
Someone ask the kind of Macbook Pro I have , it was bought in August of 2011 , but sat all those times , was only updated when needed to be , as I was trying to learn on the desktop Mac and with this illness I live in bed more than up , so I couldn't learn on both devices . I should also say at this time I paid for an extra 3 yrs. to have the opportunity to call in for advice , but was only given 15 min. of talk time , and I can't complain as the Techs were very supportive , but the problem was and is I can't be out of bed long enough to learn things I need to with only getting to call Techs , maybe every 3 or so months and sometimes I didn't call for 5 or so months , now that has expired and I don't have a choice but to ask for help .
I know some might wonder why I went to the trouble to have these devices with being sick , but I would like to live some with what time I have left in life . I am not searching for pity here , just wanting to clarify what has happened and why I am having to bother others . With this out of the way now I can get onto the other things here.
I am afraid I might have messed up the backup on the Macbook Pro was trying to make a back up and clicked on something saying do not use this , meaning the device from the desktop again . I had connected the backup device from the desktop , trying to make a backup of things on the Macbook Pro and also cant get the Time Machine turned back on , once I turned it off .
I am sorry I have taken so much time to try and explain this to you all , but I am not computer savvy as you are and have had a hard time explaining all this .
I noticed also someone said this isn't the right forum for this , and would like for someone to point me to the right one if you don't mind.
I appreciate all the good advice here and all the trouble you all went to for me .
Thank you , thank you all .

Hi, kindly let me know the mode of payments for apps from apps store applicable from India.

Similar Messages

Maybe you are looking for