Hi Legands, Can any one tell me the link from where i can download ADI

Hi Legands,
Can any one tell me the link from where i can download ADI
Thank's
Bachan

Hello Prasanth,
Try this link for ABAP HR FAQ :
[SAP ERP Human Capital Management (SAP ERP HCM);
Good Luck,
Boaz

Similar Messages

Any one tell me the web site where i can get only ABAP HR FAQ

I am searching in net and i am getting only ABAP faq's and i am not getting specific ABAP HR faq's.Could any one tell me where i can get only ABAP HR faq's
Thanks
Prasanth

Hello Prasanth,
Try this link for ABAP HR FAQ :
[SAP ERP Human Capital Management (SAP ERP HCM);
Good Luck,
Boaz

Can any one tell whether the concept which i understood is correct or not

hai everyone
iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
concept as i understood about DriverManager:
suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
help me to clear my confusion
thanks in advance

hai everyone
iam studying jdbc and this is what i understood about
the basic concept .can any one tell whether the
concept which i understood is correct or not
whenever the statement class.forName("driver class")
is executed driver class is loaded and registered
with drivermanager.Internally drivr class contains a
static bloc which contains the following code
static
Driver drv=new name of driver class();
DriverManager.registerDriver(drv);
}That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
whenever the statement class.forName("driver class")
is executed,static bloc is executed first and driver
class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
concept as i understood about
DriverManager:
suppose there may be situations where an application
developed in java has to deal with one or several
databases and this is accomplished with one or
different driver classes.so all these driver classes
are to be managed and this is done by DriverManager
class and in order to make the driver class itself
known to the driver manager we have to register the
driver classes with the help of registerDriver()
method of DriverManager class because
DriverManager is the class which will attempt
to load the driver classes into memory..Except for that last part, yes.
DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
what i understood is since the responsibility of
loading the class is done by class.forName("driver
class") only registering of the driver class is done
as the class is alredy loaded.Right.

Can any one tell me the exact procedure of how to update XPERIA NEO V to ICS using both PC companion and SUS.

Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.

SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Can any one tell me the difference between third party sales & intercompany

Hai
can any one tell me the difference between third party sales & intercompany billing
reg

Hi,
In THIRD PARTY, Goods are sent to customer from the Vendor and no Delivery happens from Company Plant
In THIRD PARTY, We will Pay to the Vendor and Bills Customer.
In THIRD PARTY, the PR will be generated automatically from the Sales order
In INTERCOMPANY Process, Goods are sent to customer from the Supplying Company code to which an order was placed from the Ordering Company code
In INTERCOMPANY,, Plant of the supplying company code will be assigned to the Ordering Sales Organisation
In INTERCOMPANY , We Bills the customer and settles to the SUPPLY COMPANY CODE
We will use two Pricing procedures, One Normal pricing and other is INTERCOMPANY pricing procedure.
These are the Major differences.
Please check these and revert back if you need more details
regards,
santosh

Pvoide the link from where i can get oracleasmlib-2.0.2-1.i386.rpm

Dear All,
I need oracleasmlib-2.0.2-1.i386.rpm for my redhat el4. Please provide the link to get this rpm.
I checked OTN but this rpm is not available there. If there is any alternative RPM available of it then please let me know.
Thanks regarsds,
Swaranchi

user1081863 wrote:
You mean old linux version or old asm library RPM?
If you mean i should not use old asm libray version then please let me know the latest version of asm rpms and its location which i can use in RHEL 4.
I pointed you to the library earlier. Follow the links from http://oss.oracle.com - click on the "Oracle's Linux Projects" link.
From that point ...
- click on ASMLib Kernel Driver link
- click on ASMLib page link
- click on Red Hat Enterprise Linux 4 AS link in the 'download ASMLib 2.0' section
- scroll down to 'Intel IA32 (x86) Architecture' section and pick your downloads based on your exact kernel version (based on uname -a)
If it ain't there, I'd recommend upgrading your kernel ... or you could compile from scratch.

Can any one tell me the difference between VK11 and MR21

Hi Folks,
I have changed price of a material using VK12.
When I go to the transaction MR21, it is still showing the old price.
Can any one help what is the difference between VK11 and MR21.
And i which scenarios these two were used?
Thanks in Advance
Gopi Krishna

Hii,
VK11: This is price master record to determine the sale price or discounts or freight or taxes which we going to charge to the final customer. Through this transaction we will determine the price automatically either in sales or billing document. These transaction is only applicable for sales & distribution module for determining the pricing for customers.
The price determined through this we use in revenue realisation.
MR21: Through this trnsaction Finance or Cost users upload the cost of the material. The cost is
Standard Cost or Moving average cost.
Cost= Raw Material CostProcessing Cost(product process cost )Overheads(employee salaries)
This cost is maintained at each material master in accounting view either standard cost or moving average cost.
These cost is determined for every material movement within the company.
Example: Production, transfer posting, goods issue- system post the quantity and at the same time system create an inventory entry i.e accounting entry for the transaction. In this accounting entries, system consider the values from material master for generating accounting entry.
If you upload production for 10 MT of material A and in material master if kept the cost of the material as 1000 then the accounting entry in production time as
Finish Goods Dr 10000
To Cost of Production Cr 10000
These cost also determined sales transaction through VPRS condition type.
Rewards if it helps
Regards
Goutham

Please any one send me the link

hi
i am raza i want the orignal software of nokia 1661-2 please send me the link because my nokia 1661-2 has been corrupted..... please send me the link ...so that i can download it ...

there is no link anyone can send you for the firmware for your phone. it is so basic that the only place you can have it looked at and possibly get assistance is the nokia care. perhaps the problem is in the messaging menu. did you go into settings and identified the number of saved messages that you would like to keep. now i am not sure if that is even an option on your phone but it is worth looking into. if your firmware has been reinstalled several times, then i am inclined to believe that the issue might be in message settings. go into settings and other (if you even have that option) and see if you can alter those first.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Can any one Tell me how i write std routine if i dont authorization in VOFM

Dear Guru ,
I Have Encountered An Technical Issue while writing routine RV61A943 and RV64A978.
Using access key I have unlocked above two routine to write Pricing Procedure's Requirement (in RV61A943) and Formula for Condition Value (in RV64A978) in se38 .
But when i am trying to make some changes in routine RV61A943 or in routine RV64A978 using SE38 I am not able to write any code within it.
So Sir I want to know in which way i have to write the routine -- Using VOFM or can write using SE38 itself.
(Initially I tried using VOFM to write the routine in development server But I found doesnot have authorization of VOFM in development server)
Can any one tell me the full technical procedure to writing the routine..
Pls help.
Thanks & Regards
Saifur Rahaman

Hi,
You need to ask for authorization of VOFM then only u can make changes to routined.
Reward if useful.
Regards
Susheel

Can any one tell me difference between 2 dates in days

hi guys,
can any one tell me the difference between 2 dates in days
for eg: input 20.12.2006 and 06.11.2006 will be 34.
thanks in advance for you answers
Regards,
Anil kumar P

Hi Anil,
Check this code for u r requirement
REPORT ZDATEDIFF.
DATA: EDAYS LIKE VTBBEWE-ATAGE,
EMONTHS LIKE VTBBEWE-ATAGE,
EYEARS LIKE VTBBEWE-ATAGE.
PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
TODATE LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
exporting
i_date_from = FROMDATE
i_date_to = TODATE
I_FLG_SEPARATE = ' '
IMPORTING
E_DAYS = EDAYS
E_MONTHS = EMONTHS
E_YEARS = EYEARS.
WRITE:/ 'Difference in Days ', EDAYS.
WRITE:/ 'Difference in Months ', EMONTHS.
WRITE:/ 'Difference in Years ', EYEARS.
INITIALIZATION.
FROMDATE = SY-DATUM - 60.

Link from where I can download Oracle Ultra Search for Oracle10g

Hi All,
I need to install oracle ultra search on Oracle10g database. If anyone know the link from where I can download it, then kindly share.
Thanks
Sunny

Hi,
Don't know If I am asking the right question or not but isn't this doc. talks about the configuration part of the Oracle Ultra Search which needs to be
done once the Installation part is done.
I have oracle 10g database installed on win2k3 machine and now I wish to install the Oracle Ultra Search on it. Is there any patch/update available for
installing Oracle Ultra Search. As per the documentation, it can installed using Oracle Universal Installer but I don't have the Oracle UI.
Beside this, I was following the doc. on the link provided by you; I got an error *" Role WKUSER doesn't exist"* while executing the below mentioned
query:
GRANT CONNECT, RESOURCE, WKUSER TO <username>;
Error: User WKSYS doesn't exists.
ALTER USER WKSYS IDENTIFIED BY <password>;
Are these errros because of Oracle Ultra Search not being installed on my database.
Kindly help.
Thanks
Sunny
Edited by: sunny@newbie on Jun 8, 2009 2:53 PM

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

Can any one tell me how to write the properites files and how to acces

can any one tell me how to write the properites files and how to acces thoose files
plz let me no
thanks in advance

http://www.exampledepot.com/egs/java.util/Props.html

Can any one tell me how to stream the images in flash.

Hello Friends,
i have created a dynamic page flip book with xml, i want to
zoom the images in swf loaded, with streaming, so that user can
preview the image while a good quality image is loading. I wanna
know that how to load a part of large image or swf.
Image effect like :-
http://www.zoomify.com/
Can any one tell me how to stream the images in flash.

On Thu, 17 Apr 2008 05:53:27 +0000 (UTC), "FlashDavil"
<[email protected]> wrote:
>I wanna know that how to load a
>part of large image or swf.
You show a preview and use loadMovie() to load a big file.
You can
create a preloader (progress bar) showing how much part is
loaded,
while user sees the small image. When you achieve 100% tou
show that
big image. What's more?
> Can any one tell me how to stream the images in flash.
What are you talking about is not a "streaming", but
"progressive
download". Images "streaming" is impossible.

Hi Legands, Can any one tell me the link from where i can download ADI

Similar Messages

Maybe you are looking for