HI, my 6520 series printer, running on vista 64 bit , has error ox00000643 please help !

please help me fix this error !!

Hi kellykenny25,
I am linking you to a Photosmart 6520 troubleshooting document for an "Ox" error code. Click Here I suggest that you give this a try and let me know what happens.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Similar Messages

Why wont itunes download on my laptop running windows vista, keep getting error message 127, help

Why wont itunes download on my laptop running on windows vista, keep getting Windows error127, can anyone help please this is driving me insane, tried 9 times already without
success.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I m trying to write to a Mainframe file from informatica mapping. I have created the data map for tarrget file and have imported it in informatica designer.After completing the mapping when i try to run it gives me below error. Please help me out in resol

This is not a PC/PWX problem, but a mainframe security problem. TIDSS01.POS.IBD.DR0100.DAT is not a GDG file name.It might be the base for a GDG. A GDG file name would look something like eitherTIDSS01.POS.IBD.DR0100.DAT(+1)orTIDSS01.POS.IBD.DR0100.DAT.G001V00 So I suspect that you have the wrong file name.Please talk with your mainframe team.

HI Dan, I am very new to using power exchnage please help me through this issue, Below is the details : My data map name :postest.test1_POS
Copy book name which is used to create the power exchange Datamap : TIDSS01.ACTRLP.TEST(POSCPY)
Main frame GDG name : TIDSS01.POS.IBD.DR0100.DAT Below are the Session properties i have set in informatica workflow:Schema Name Override : postest
Map Name Override : test1_POS
PWX Partition Strategy : Overrides driven
Space : CYLINDER
File Name Override :TIDSS01.POS.IBD.DR0100.DAT(+1)
I am getting below error: PWXPC_12190
Message: [ERROR] Transformation [test1_POS]: A permanent error has been encountered in PowerExchange: [
[Informatica][SCLI PWX Driver] PWX-00267 DBAPI Error. DB_INSERT failed for file postest.test1_POS.
[Informatica][SCLI PWX Driver] PWX-01279 DBNTC INSERT failed for file postest.test1_POS. Rcs 1274/2019/268.
[Informatica][SCLI PWX Driver] PWX-01274 DBNTC INSERT Failed for file postest.test1_POS, rcs 260/2019/268.
[Informatica][SCLI PWX Driver] PWX-02019 SQL insert failure. SQLCODE = 268.
[Informatica][SCLI PWX Driver] PWX-00268 DBAPI Error. DB_OPEN failed for file TIDSS01.POS.IBD.DR0100.DAT.
[Informatica][SCLI PWX Driver] PWX-00220 DYNALLOC failed for file TIDSS01.POS.IBD.DR0100.DAT RCs = 9700/0.
[Informatica][SCLI PWX Driver] PWX-00221 DATA SET: TIDSS01.POS.IBD.DR0100.DAT WITH RETURN CODE 08 REASON CODE 00
[Informatica][SCLI PWX Driver] PWX-00221 RACF FUNCTION: RACDEF FOR
[Informatica][SCLI PWX Driver] PWX-00221 IGD308I DATA SET ALLOCATION REQUEST FAILED -
[Informatica][SCLI PWX Driver] PWX-00221 IKJ56893I DATA SET TIDSS01.POS.IBD.DR0100.DAT NOT ALLOCATED+
[Informatica][SCLI PWX Driver] PWX-07404 Permanent error set by Open call on file "TIDSS01.POS.IBD.DR0100.DAT" because dynamic allocation failed. rc=4
[Informatica][SCLI PWX Driver] PWX-07515 Insert call for table postest.test1_POS met a permanent error. Return codes 267 2019 268.
]

I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help, I cannot sync Xerox M138 with my Macbook Air. Printing is paused and does not resume. Please Help

I cannot sync Xerox M138 Printer with my Macbook Air. Printing is paused and does not resume. Please Help.

I FIXED IT MYSELF.
I simply let the iPod run out of battery.
Then it said CONNECT TO POWER.
And then I did.
And after 15 minutes, it worked!
Self-solved problem!

ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

Hey thanks for replying.
Here's what I did:
First I tried the Winsock reset in the Command prompt. Nothing changed.
Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
I did the Winsock reset in the Command Prompt again and rebooted my comp.
Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!

Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
 6% WindowServer
 0% AppleSpell
 0% SystemUIServer
 0% powerd
 0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passed

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

HBR running error (Urgent, please help) Error connecting to Essbase Server

Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
Eric

I am actively using the EAS, but the error is suddenly come that I think I am not logout by server

Trying to get my iphone5 to backup with icloud. i tried the set up the way the tutorial stats but still when i try it says backup was unable to complete. i have anipad running with the same icloud account and it has no problem. please help.

trying to set up icloud on my iphone5 and it keeps saying that its unable to complete the back up.. i have it running on my ipad just fine.. please help. i followed all the steps in the tutorial.. thank you

Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB

Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

HT1751 iTunes thinks I'm running two versions on my computer. Please help.

My old computer crashed and I just replaced it. Since the new computer I installed a newer version of itunes. Now itunes thinks I'm running two versions on my computer. Please help.

Linda MB wrote:
Now itunes thinks I'm running two versions on my computer.
Why do you think this?

HT4356 I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapor

I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapore)

power everything off printer & router.
re-boot ipad.
Press and hold the Sleep/Wake
button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake
button until the Apple logo appears. page 128 iPad user manual.
more details on re-booting:
http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
power on router then printer then ipad
Cross your fingers.
Robert

Windows vista Error response-PLEASE HELP

Recently purchased a new computer w/Vista. Problem is that I couldn't transfer my songs from my old computer, so decided to use IGADGET to transfer from my IPOD. Error:retrieving the COM CLASS FACTORY for component w/CLSID. Please help if you have any idea how I can fix the error. I've installed Itunes 7.11 and reinstalled and it keeps happening.

I don't know about the originator, but I still require assistance. The help link didn't solve my issue, so further help would be welcomed.
I have Vista Ultimate (came with new computer), with the UAC turned off (it was interfering with Microsoft Money). I get the same popup error as noted before, and I've done the regsvr32 on vbscript.dll multiple times. I'm on an admin account, I've used an admin command window, and I've even tried running the iTunes setup as admin, as well as in compatibility mode as XP SP2.
I thought maybe my existing iTunes 7.0 install was interfering, so I tried to remove it via Control Panel, and I got the exact same error. So I can't remove what I have and I can't install the upgrade.
The only good news is that my iPod Photo finally started synching with the computer, if only in manual mode. I can't burn CDs however.
Assistance appreciated. Thanks.

Oracle 10g Rel2(10.2.0.3) on Vista ultimate driving me crazy, Please HELP

Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,

Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,

Printing subsystem has stopped working - please help

I have had my imac for 4 months and now priniting has stopped.
I have a canon 4300 for prints and an HP office 6200 for B&W everyday stuff. The canon is directly attached via usb and the 6200 is attached to my new AEBS. i can configure my canon just fine using print and fax utility however it finds the HP via bonjour automatically but when i push ADD it gives an "error trying to add the selected printer" and the error says "successful-ok-conflicting-attributes."?
I also seems to find the same 6200 printer as a shared printer and will config and add it ok but somehow i dont think thats correct.
When i try to print to the canon i get an error from any application - some say not enough memory - I have 2GB. Same thing happens when i try and print to the HP. THe strange thing is that I can use the maintenance utiliies to get to the canon and it runs them so the connection is ok something with the print subsystem.

Plot thickens, I can print to these printers just fine from my wireless attached macbook pro! Interesting it sees the HP as Bonjour and the Canon as direct attached - it does see the extra HP "shared". This seems to be isolating it to the imac and not the printers or connections. Please help this is tough,

Problems encountered while running ant build file....Please Help

Hi ,
I'm trying to create a ear using a ant build script.But encountering the following error :
[java] Exception in thread "main" java.io.InvalidClassException: javax.management.MBeanAttributeInfo; local class incompatible: stream classdesc serialVersionUID = 7043855487133450673, local class serialVersionUID = 8644704819898565848
[java] at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:519)
[java] at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1546)
[java] at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
[java] at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1546)
[java] at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
[java] at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1546)
[java] at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
[java] at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1693)
[java] at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
[java] at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1628)
[java] at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1293)
[java] at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1912)
[java] at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1836)
[java] at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1713)
[java] at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
[java] at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)
[java] at weblogic.management.internal.Helper.getMBeanInfo(Helper.java:281)
[java] at weblogic.management.internal.DynamicMBeanImpl.<init>(DynamicMBeanImpl.java:186)
[java] at weblogic.management.internal.DynamicMBeanImpl.<init>(DynamicMBeanImpl.java:169)
[java] at weblogic.management.descriptors.XMLElementMBeanDelegate.<init>(XMLElementMBeanDelegate.java:67)
[java] at weblogic.management.descriptors.XMLElementMBeanDelegate.<init>(XMLElementMBeanDelegate.java:51)
[java] at weblogic.management.descriptors.BaseXMLElementMBeanImpl.<init>(BaseXMLElementMBeanImpl.java:8)
[java] at weblogic.management.descriptors.toplevel.EJBDescriptorMBeanImpl.<init>(EJBDescriptorMBeanImpl.java:94)
[java] at weblogic.ejb20.dd.xml.DDUtils.processEjbJarXML(DDUtils.java:212)
[java] at weblogic.ejb20.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:105)
[java] at weblogic.ejb20.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:90)
[java] at weblogic.ejbc20.getDescriptorFromJar(ejbc20.java:670)
[java] at weblogic.ejbc20.runBody(ejbc20.java:425)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:126)
[java] at weblogic.ejbc.main(ejbc.java:29)
here is the ant file which i use to build the ear :
<project name="DNi6_WebOSS" default="all" basedir=".">
 
 <property environment="env"/>
 <property file="build.properties"/>
 <property name="base" value="."/>
 <property name="classes" value="${base}/classes"/>
 <property name="lib" value="${base}/LIB"/>
 <property name="output" value="${classes}/out"/>
 <property name="JAR" value="${output}/JAR"/>
 <property name="build" value="${output}/temp"/>
 <property name="dist" value="${output}/dist"/>
 <property name="cp" value="${lib}/weblogic.jar;${lib}/log4j-1.2.8.jar;${lib}/dom4j-1.6.1.jar;${lib}/jdom.jar;${lib}/tools.jar"/>
 <property name="destfile" value="DNi6WebOSSBean.jar"/>
 <property name="exclude" value=""/>
 <property name="class_path" value="."/>
 <property name="include" value="META-INF/*.xml com/telia/dni6/util/*.class com/telia/dni6/bean/*.class"/>
 <target name="all" depends="1-clean,2-init,3-jar_ejb,4-ejbc,5-final_copy "/>
 <target name="2-init">
 
 <tstamp/>
 
 <mkdir dir="${build}"/>
 <mkdir dir="${JAR}"/>
 <mkdir dir="${build}/META-INF"/>
 <mkdir dir="${dist}"/>
 <mkdir dir="${dist}"/>
 <copy todir="${build}/">
 <fileset dir="${classes}/">
 <include name="**/*com/telia/dni6/util/*"/>
 <include name="**/*com/telia/dni6/bean/*"/>
 </fileset>
 </copy>
 <copy todir="${build}/META-INF">
 <fileset dir="${base}/">
 <include name="ejb-jar.xml"/>
 <include name="Manifest.mf"/>
 <include name="weblogic-ejb-jar.xml"/>
 </fileset>
 </copy>
 </target>
 
 <target name="3-jar_ejb" depends="2-init">
 <jar destfile="${dist}/std_${destfile}" excludes="${exclude}" includes="${include}" basedir="${build}" manifest="${build}/META-INF/Manifest.mf"/>
 </target>
 
 <target name="4-ejbc" depends="3-jar_ejb">
 <java classname="weblogic.ejbc" fork="yes" jvm="D:\jdk1.5.0_06\bin\java">
 
 <arg line="-compiler javac ${dist}/std_${destfile} ${dist}/${destfile}"/>
 <classpath>
 <pathelement path="${cp}"/>
 </classpath>
 </java>
 </target>
 <target name="5-final_copy" depends="4-ejbc">
 <copy todir="${JAR}/">
 <fileset dir="${dist}">
 <include name="${destfile}"/>
 </fileset>
 </copy>
 </target>
 <target name="1-clean">
 <delete dir="${build}"/>
 <delete dir="${dist}"/>
 <delete dir="${JAR}"/>
 <delete dir="ejbcgen"/>
 <delete dir="${output}"/>
 </target>
</project>
and these are the weblogic-ejb-jar and ejb-jar.xml used :
weblogic-ejb-jar.xml :
<?xml version="1.0" encoding="UTF-8"?>
<weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-ejb-jar.xsd">
<weblogic-ejb-jar>
 <weblogic-enterprise-bean>
 <ejb-name>WebOSSInterfaceBean</ejb-name>
 <message-driven-descriptor>
 <pool>
 <max-beans-in-free-pool>5</max-beans-in-free-pool>
 <initial-beans-in-free-pool>5</initial-beans-in-free-pool>
 </pool>
 <destination-jndi-name>DNi6RecdTopic</destination-jndi-name>
 <jms-polling-interval-seconds>1</jms-polling-interval-seconds>
 </message-driven-descriptor>
 <jndi-name>WebOSSInterfaceBean</jndi-name>
 </weblogic-enterprise-bean>
</weblogic-ejb-jar>
ejb-jar.xml:
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
<ejb-jar>
 <enterprise-beans>
 <message-driven>
 <ejb-name>WebOSSInterfaceBean</ejb-name>
 <ejb-class>com.telia.dni6.bean.WebOSSInterfaceBean</ejb-class>
 <transaction-type>Container</transaction-type>
 <message-driven-destination>
 <destination-type>javax.jms.Topic</destination-type>
 </message-driven-destination>
 </message-driven>
 </enterprise-beans>
</ejb-jar>
Please help!!!
Thanks
Smita.

Hi Rob,
I included the weblogic.jar of weblogic 9.0 in the lib and the classpath.And changed the weblogic.ejbc to weblogic.appc as weblogic.ejbc is deprecated.
But again i'm getting this error while running the ant script.
Part of the ant script where is error is encountered

 <target name="4-ejbc" depends="3-jar_ejb">
 <java classname="weblogic.appc" fork="true" jvm="D:\jdk1.5.0_06\bin\java">
 <arg line="-compiler javac ${dist}/std_${destfile} ${dist}/${destfile}"/>
 <classpath>
 <pathelement path="${cp}"/>
 </classpath>
 </java>
 </target>
And Error is :
[java] Usage: java weblogic.appc [options] <ear, jar, war or rar file or directory>
[java] where options include:
[java] -help Print the standard usage message.
[java] -version Print version information.
[java] -output <file> Specifies an alternate output archive or
[java] directory. If not set, output will be
[java] placed in the source archive or directory.
[java] -plan <file> Specifies an optional deployment plan.
[java] -forceGeneration Force generation of EJB and JSP classes.
[java] Without this flag the classes may not be
[java] regenerated if it is determined to be
[java] unnecessary.
[java] -quiet Turns off output except for errors
[java] -lineNumbers Add JSP line numbers to generated class
[java] files to aid in debugging.
[java] -library <file> Comma-separated list of libraries. Each
[java] library may optionally set its name and
[java] versions, if not already set in its
[java] manifest, using the following syntax: <file>
[java] [@name=<string>@libspecver=<version>
[java] @libimplver=<version|string>]
[java] -librarydir <dir> Registers all files in specified directory
[java] as libraries.
[java] -keepgenerated Keep the generated .java files.
[java] -verbose Compile with verbose output.
[java] -classpath <path> Classpath to use.
[java] -source <source> Source version.
[java] -advanced Print advanced usage options.
[java] <Aug 10, 2006 12:45:07 PM IST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
[java] [J2EE:160128]ERROR: Incorrect appc command-line. Too many arguments were given. The command-line only takes a single argument, the source file, in addition to the supported options.
[java] Java Result: 1
I'm not sure how to proceed.Please suggest
Thanks
Smita

HI, my 6520 series printer, running on vista 64 bit , has error ox00000643 please help !

Similar Messages

Maybe you are looking for