HI my audio output is not working

Hi way I cannot hire the volyume on my luptuo

Hello sigaltal,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Have a nice day,
Mario

Similar Messages

  • Audio output will not work on external speakers.  Internal speakers will work.  What do i do to replace audio output slot

    audio output will not work on external speakers.  Internal speakers will work.  What do i do to replace audio output slot

    Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
    I hope that helps!
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • IPad audio  output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    my iPad is a 3rd gen, 16GB wifi only model, if that helps
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • Audio output is not working in preferences

    MacBook Pro 17" late 2012 - running lion for the last 6 mon, just did 10.8.3 upgrade as instructed. Now I have no audio control on output. Icon in menu is grey and the the preferences' control for output are grey . Output, which is set to Digital-what happened to internal speaker controls. Verified disk, reset permissions, did a pram-restart, and a few restarts from there.  Still no audio, but the digital light did come on once out of the earphone jack.  Did the earphones and no sound.  Correction, the earbuds are now working, they were not working earlier. SUGGESTIONS please!

    Hello bacon48,
    Welcome to the Apple Support Communities. If you want to know more about troubleshooting the audio on your MacBook Pro, the following article will assist with that process.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Regards,
    -Norm G.

  • Red light coming from my audio output, speakers not working

    I read somewhere about wiggling a toothpick around in there, but that didn't work, any other ideas.
    This happened after I had a 1/4 to 1/8 converter plugged in there to use a little mini amp.
    I've lost the use of speakers.
    headphones work fine
    I think the optical input is still reading as if something is plugged in. Not sure if there's something in my system I need to switch, or if I need to take it in, have the jack opened up and replaced

    Just to rule out the obvious make sure your mute switch (F3) is not on. If your 'switch is stuck' you would see a red light coming from the headphone port.
    Double check your Sys Prefs - Sound settings ...if things still are not working you might try a SMC reset followed by a Pram reset that would restore your orig. settings.

  • Audio output's not working

    Whenever I try to watch youtube videos or face time, I can not hear the words that other people are saying.

    So odd that you mention this.  It happened to me last week.  I could hear VERY faint audio coming out of the back jack.  I figured the mobo or the physical connection was bad and was about to call Lenovo and get a replacement under warranty.
    I rebooted to activate some Vista updates that were pending and when I did..... the audio was fine.  Been several days with several reboots now.  No idea what caused it...
    Lenovo 3000 K100 57061330 Intel Desktop Computer - Intel Core 2 Duo E6550 2.33GHz, 3GB DDR2, 500GB SATA, SATA DVDRW, Windows Vista Home Premium, Nvidia G-Force 8600, external Maxtor 500GB backup disk.

  • Problem with audio output device not working

    Okay about a week ago, i came home from work, booted up my laptop and noticed that the hp quicktouch program failed to start. Then I also noticed a red X over my sound icon on my taskbar. So i thought it might have been an error of some sort and rebooted. When I did that everything came back up find, but when I started playing a game, I noticed the sound went out again... I closed the game and went into the device manager. But as soon as I closed the game out the sound fixed itself... So i started the game back up and about 10 mins in it went out again... So I went back into device manager, scanned for hardware changes and it seems to be working find, so i reinstalled the game thinking that could be the problem.
    Well when I rebooted my laptop i got the error again about quicktouch and the red X over my speaker icon. I went back into device manager to find that my sound, game controller device and driver is not even listed...
    Ive been looking around for a fix to this problem, but could not find any solution. So today I reinstalled windows again, but no sound, no driver, or anything is showing up. I really dont know what to do to fix this, people say download drivers and ive tried that, nothing is seeming to work.
    If anyone knows what I can do to fix this please inform me, the only thing else I can think of is go MAC lol.
    Oh btw, im running a HP Pavilion Entertaiment PC (dv9700). It has windows vista 64 bit.
    Thanks in advance.

    use stystem recovery and lose all files, photos, games and all settings - that the best way ....
    use device manager to reinstal sound driver, but try to install diferent versions of it, after update (made by hp update) i had no sound, installing older ver help
    sorry for my poor english
    Hp Pavilion dv6408nr - Vista
    external HDD - ubuntu

  • Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

    Audio captcha is not working in mac safari 5.1.7.
    We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
    Audio refresh is also not happening.
    When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
    <Edited By Host>

    Audio captcha is not working in mac safari 5.1.7.
    We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
    Audio refresh is also not happening.
    When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
    <Edited By Host>

  • Audio Service is not Working.

    HI everybody,
    So today i just turned my pc on after a few days and noticed that there was RED CROSS "X" on my volume icon. It says that Audio Service is not working. i opened services(service.msc) searched for it and when i tried to start
    it gives me this ERROR! I searched for solutions over the net as well as here. Recommendations that i found were 
    >Reinstall the drivers
    >Unisntall drivers from Device Manager and then reinstall.  (WHEN I TREID TO INSTALL DRIVERS IT GAVE ME ERROR THAT "AUDIO SERICE IS NOT RUNNING AND COULDNT BE STARTED" )
    >Run "RPC" service and "Endpoint service". Currently both are running !
    Last but not least, u must be thinking that why i posted such a big post, this is because others problems were solved and issue was also a bit different. :D
    (I tried to post two images but the site said that u are not allowed to post images and links!)
    Thank you all in advance, and please help me quick to solve this problem. I cant play games without sound for long ! :"(

    Hi
    Are you installing new drivers downloaded from the manufacturer website or letting windows install it for you?
    Try disabling the sound card in the bios, reboot and then enable it again, reboot and see what windows does.
    Can you also run a sfc scan and see if there are any corrupted files?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RH 5.5 output does not work properly in RH 7

    I inherited a WebHelp project created in RH 5.5. I have RH 7.
    When I open the files, make modifications, and recompile them, the
    output does not work properly once I put it on our hardware box.
    Those infamous red squares are present and there seems to be a lot
    of .js files being called, but even when I do a straight 1:1 copy
    and include all the files, and delete the red squares, it still
    doesn't work right.
    Also, oddly, when I open the original (5.5) files in my v7 --
    even without making ANY changes at all -- the TOC has
    disappeared.

    When you view the upgraded source files in RH7, are the red
    squares seen the editor?
    When you generate to a local folder and view the output
    there, are the red squares present? Are there any other issues with
    the generated output?
    Have you applied all three patches to RH7? Help About should
    show 7.0.3.

  • Multicam source sequence - audio offset does not work when syncing via audio

    Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
    Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
    Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
    Unlesss I'm missing something?

    I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

  • Microphone speaker and audio jack is not working?

    hi i buy a I phone 5 S  in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working  ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the  device  they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain  and what i will do to change the device.

    I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
    Good luck,
    Clinton

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • Audio device is not working, i have installed proper drivers, but audio device is not working

    hi,
    I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system,  My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

    Tecra A8
    Model No = PTA83L-04C02N
    Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
    Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
    Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
    Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
    Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
    Good luck!
    -Jerry

  • My audio device is not working

     hello
            I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

    Hello rasfunkey,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for