Hi my canon mg2520 printer wont turn on anymore

Hi my canon mg2520 printer wont turn on anymore, was working last night
all plugs are well
-Alexis

Hi topo123,
When the printer will not power on, we recommend the following:
1. Ensure that the printer is plugged directly into a wall outlet instead of going through a surge protector that is plugged into a wall outlet, as sometimes ports on a surge protector may no longer work, even if other ports on the protector do work.
2. Unplug the power cord from the back of the printer and from the wall outlet/surge protector and leave them out for at least 10 minutes, then plug it back in to try and reset the printer.
3. Try plugging the printer into another power outlet in a different area of the room, or another room if possible.
4. If you have another power cord you can use with the printer, please see if using that power cord will allow the printer to
power on.
If the printer still does not turn on after following the above steps, it will require servicing.  Please call or email us using one of the methods on the Contact Us page for servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • It wont turn on anymore

    my ipod wont turn on anymore
    it is dead ive tried charging it for ever and a day im kinda mad cuz i harldy go to use it and i dont have a clue on here how t get

    No as you did not mention which model iPod Nano you have. 
    Call Apple Care.   You have 14 days from the date of purchase to return your iPod Nano with no questions asked.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.  
    If the warranty has expired,  take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.   Your battery may be dead.

  • I left my ipod alone for a second on the bed i come back and i click the on button it wont turn on anymore and its fully charge what should i do?

    i left my ipod alone for a second on the bed i come back and i click the on button it wont turn on anymore and its fully charge what should i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Canon ip6600d Printer wont talk to my emac G4 on system 10.4.6

    I have bought a new Canon ip6600d printer and have downloaded the relevant drivers (canonip6600d416.dmg) -from the cannon website - to work with 10.4.6 with my G4 emac and it cannot see it. None of the software from the CD works, it is connected with a USB cable and as far as I can see I am doing nothing wrong. I am using the Printer Utilities through Applications and I cannot add the driver this way. Anyone have any suggestions as the only way I can print anything is through my Sony Camera as a pictbridge and it will only print pictures taken by the camera, and that is it. Nothing else.
    I would dearly love to use it for other things, like my own pictures that I have worked on etc from my emac. I would just love to get the drivers working but everything I try has to same result... no printer is connected. If anyone can help I would be so happy.

    Not trying to be a jerk, but what does this have to do with a nano? I think you are looking for this?

  • Printer wont turn off, and the touch screen is black.

    I can not get my printer to turn off. The green power button will just stay on. I tried unplugging it, but as soon as I plugg it back in the power button will still be on. My touch screen also won't work. It just stays  black.

    Hi @Makayla1 , and welcome to the HP Forums!
    I see you're having touchscreen and power issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    I'd suggest performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend plugging the printer power into a different wall outlet. 
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT201210 What to do when an error occurs after the restoring process? my phone wont turn on anymore

    What to do when an error occurs after the restoring process? my phone wont turn on anymore

    The phone is telling you to plug in your phone to your computer. Do that then let it sit for a few minutes and then try it again and make sure itunes is open when you do

  • My 3gs turned off yesterday n read to connect to itunes when i did it needed to be set back to its orig version but there was aan error n wont turn on anymore

    n read to connect to itunes when i did it needed to be set back to its orig version but there was aan error n it wont turn back on

    Connect in recovery mode and restore, as described in this article:
    If you can't update or restore your iOS device

  • My printer wont turn off or respond -- HP Photosmart C4280 All-in-One Printer - Scanner - Copier

    My printer quit working and stays on all the time. I cant shut it off and the on light keeps blinking.

    Hello sgusta ,
    Please perform the below mentioned step.
     Make sure the printer is ON.
     Unplug the Printer Power cable .
     Unplug the USB cable from back of the printer in case you have the printer connected with USB.
     Wait for 30 - 40 seconds.
     Plug in the Printer Power cable.
    The issue should be resolved by performing the above steps.
    If the issue still exits, then do call the HP Tech Support (US) 1-800-474-6836
    Regards  ,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Every since the new update on my ipnone 5 my canon seplhy printer wont connect? help? i just got this printer for my iphone

    I got the phone and printer about 2 months ago so i could print easily at home. They both connected and have worked fine until I had to do the new ios 7 update. Every since then my phone cant connect to printer. It says no printer found even though they are side by side. please help. printer is no good to me if it doesn't connect.

    Hello there, Badboymbc.
    The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iPod wont turn on anymore. I have had my iPod since the end of January of 2012, Last night it shut off on me. It keeps trying to reboot itself, but all it does it show the apple symbol, then the screen goes white and reboots again. I need help. :(

    Hi, My name is Cassie.
    I bought my iPod off of amazon just around the end of January of this year (2012). Last night I was playing around on my iPod. Listening to pandora, and editing pictures. I got to a picture and clicked edit, and then my iPod shut off. It rebooted itself and seemed to be running as if nothing had happened. I put my music back on and went back to the picture and tried to edit it again. I clicked the edit button and the ipod shut off again. This time, it kept rebooting. It went to the apple symbol to turn on and about thirty seconds, the time it normally takes to turn on, the whole screen went white and then shut off and tried rebooting again. It kept doing this over and over again. After a while, it did eventually stop, but only to a completely white screen. It was like that all night long because I fell asleep. (gave up on it). It is now the afternoon and after I held the lock button and the home button down the screen when off. I let it sit for about a half an hour, then I tried turning it on again. But it still is doing the same thing. I have no idea what I could have done to make it do this. Unfortunalty, I am not home to connect it to my own iTunes, but regaurdless, it wont even connect to the computer. I did have my ipod plugged in the whole time it was rebooting and shutting off last night. It was connected to my wall jack which normally works fine. But even having it plugged into the computer as it is now, its still doing the same thing. I am dissapointed that I might end up loosing everything that I have on it. I have not been able to sync it to my computer to save all the apps and pictures and music I have stored on it. I really do hope I can get some help or advice!
    Thank You!!
    -Cassie Lawrence

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • My imac wont turn on anymore. it only shows a picture of a folder and question mark

    I cant get my imac to turn on. It will only show a folder with a question mark in it,.

    Your Mac can't find any bootable device. That could be because of two things:
    1. The PRAM "forgot" the startup disk.
    2. The hard disk is damaged.
    First, press Option key while your Mac is starting and check if you see the OS X partition. If you see it, choose it and when OS X has booted up, open System Preferences > Startup Disk and select the OS X partition.
    If not, the hard disk is damaged. If you have OS X Lion as you indicate, press Command, Option and R keys while your Mac is starting to start into Recovery. Then, open Disk Utility, select Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
    If you didn't make a backup, use DiskWarrior to recover your files. It could not work on some ocassions.
    Also, there's a problem with the 1 TB Seagate iMacs hard disks sold between October 2009 and July 2011 and they are being replaced for free. Check if you can get replaced the hard disk for free > http://www.apple.com/support/imac-harddrive

  • Nano wont turn sideways anymore

    my new ipod nano stopped turing sideways and now is stuck upside down? anybody know how to fix it ?

    If you are unable to turn the screen orientation with 2 fingers then make a Genius Bar appointment at your nearest Apple Store or send it in for service: https://selfsolve.apple.com/GetWarranty.do

  • I dropped my Iphone 4 on the cement and the back is all cracked, and the phone wont turn on either.

    I dropped my iPhone 4 on the cement and when I picked it up the back was all smashed and broke and I checked to see if the phone itself was alright, but It wont turn on anymore. I have no idea what happened

    Krystal99 wrote:
    . I have no idea what happened
    Could be this...
    Krystal99 wrote:
    I dropped my iPhone 4 on the cement and when I picked it up the back was all smashed and broke ...
    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • My ipod wont turn on unless on charge! :(

    my ipod wont turn on anymore.
    i droppped it at the gym and now the only time it works is when it is on charge. i can't even connect it to iturns on my PC:(
    when its connected to the charger i can play a song but as soon as i unplug it it goes off again
    please help
    p.s its a 60g ipod video (if that helps)
    what do i do????????????

    Hold the middle button and the top button for 10 seconds, worked for me Hope I helped

  • Ipad Wont Turn On-Tried Everything-Plz HELP

    So my new ipad wont turn on anymore. i have only had it for a out a month so i dont understand what could have gone wrong. I tried plugging it into the wall socket and into multiple computer usb ports and nothing happend. I tried reseting by holding the sleep and home button but nothing happend. If anyone else has another solution it would be much appreciated.

    Crow Racing wrote:
    This post is awesome Worked for me, but now im gun shy. Battery was 80%.
    Not sure which of the fixes worked for you, but don't be gun shy. S* happens as they say. If it worked, chalk the problem up to the "what the heck was that". Its no different than when an application quits on my MacBook to me. I just perform the recommended reboot, restart or whatever I need to make things right again. I would be concerned if it is a recurring problem, but for every once in a while ... As I read on one post recently in a similar situation, the OP's problem was blamed on the "computer gremlins" at work.

Maybe you are looking for