Hi,my iphone    it wont slide to unlock

my iphone it doesnt slide to unlock

@kbroadbent82
Even i had a same issue on my iphone 3gs. Its a boot memory issue and can be resolved in two ways
1. You need to remove the battery and keep it for 20mins(Which is lil complicated if u donot know how to remove) then place it back so that it refreshes the memory and starts fresh boot.
OR
2. Dry out the battery completely ensure it dies without battery , keep it saftely without charging for a week(7days mandatory) and after a week start charging . This procedure ensure that once the battery is completely dried it will refresh the boot memory and starts with fresh boot . This process is same as the above
As i donot recommend removing the battery as the procedure is complicated and factory fit is not obtained, you may also end up with loose screws hence i would recommend going with 2nd step , let me know if you have any questions.
Regards
Dhananjay

Similar Messages

  • My iphone 5 wont slide to unlock, but hard resetting (Holding power button and Home button) doesn't fix it.

    I tried to unlock my iphone by sliding the bar, but nothing happens, the phone is not frozen because the backround still moves, but i cant unlock it or answer calls. i tried the hard reset but it didnt work either. any help apreciated.
    Thanks.

    Try connecting the iPhone to iTunes and don't even try to slide to unlock ...just let it bring iTunes App up and then do a Sync.

  • My iphone 4 wont slide to unlock the ios is on 6.1 help

    Help my iphone is stuck on the home screen doest let me unlock it

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
    Try each of these in order until the issue is resolved.

  • My itouch screen is frozen, wont slide to unlock. have done what adviced with buttons...can anyone help please?

    my itouch scrren is frozen, it wont slide to unlock..i have done all that was adviced with the buttons but that didnt work..can anyone help please?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • My ipod screen wont slide to unlock and i have just reset it to factory settings, help!

    my ipod screen wont slide to unlock and i have just reset it to factory settings, help!

    Seems like a hardware problem.  An appointment at the Genius Bar of an Apple store is in order.

  • Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation.

    Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
    I have already tried holding down the power button and home button for 10 seconds, but no difference.

    I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
    However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
    It's happened 4 times now.  Originally it went away with a restore from backup, then worked for 2 more days.  The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances. 
    I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue.  I deleted several apps, I stopped using the games and many other apps.   I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
    I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email.  It was working when I went to bed.  I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
    However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things). 
    The two things I did between a broken keyboard and a working keyboard were:
    1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
    2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
    In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up.  Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
    Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off.  I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue.

  • My ipod 4g wont slide to unlock, but it will slide to power off

    Helpppp ! My ipod touch 4g wont slide to unlock, but it will slide to power off & the screen is craked does this mean its broken or ?

    Apple doesn't repair it.  If there is no sign of abuse, they replace it with a refurbished unit.  The fixed-price for non-warranty replacements can be found here.

  • TS2634 my iphone 4s wont slide from one screen to the next and I have to double tap on an icon to make it work. How do I fix this??

    My iphone 4s wont slide from one screen to the next and I have to double tap on each icon to open it. I can hear siri talking and telling me what each icon or button I press is. How do I fix this problem? I have restored my phone to last saved but the problem still remains.

    My problem was fixed via your suggestion. Thanks. Then I heard, though it hasn't been substantiated by anyone I know, that pushing the the round "start" button after the unit is on three rapid times will solve the problem. Do you know if this is valid info?
    Message was edited by: wallyintouch

  • HT201412 why iphone 4s cannot slide to unlock?

    why iphone 4s cannot slide to unlock?

    Told by Apple store that it is an LCD problem and has to be repaired.  Without warranty, it will cost approx. $150.  I think they will give you a new one if your is under warranty... not sure.

  • IPhone 3gs frozen - slide to unlock frozen - phone dropped - pad lock without circle

    Dropped iPhone 3gs (ios 3.4.4 or previous version - can't remember which one).  Slide to unlock is frozen.  If I press home button twice then reverse, play and fast forward symbols show up on center of screen (but nothing happens when I press on them).  There is a plain pad lock symbol (no circle) on the top center of the screen.  Won't do anyting else.  Any ideas?  Also, the phone will ring...I just can't unlock the phone to answer.  Then the screen shows that I missed a call with the phone number displayed.

    ok no problem looking like you would have to restore the device.
    as long as you have a back up you would be fine.
    http://support.apple.com/kb/HT1414

  • IPhone freezes after slide to unlock

    After update to 5.0.1 my iphone is now unable to be locked as when i slide to unlock it freezes (iphone 3gs)

    As lots of users I am having the problem that my iPhone takes many seconds to unlock once I "slide to unlock" it could sometimes take 5 to 10 seconds before my telephone reacts.
    This is really anoying, because I can't even pick up a phonecall when this happens, I have to wait untill my phone stops ringing, and then I suddenly can unlock the phone and I have to call that person back (this cant be the meaning of a phone)
    I recently noticed that this must have to do with wifi. I disabled wifi for almost 2 weeks, and I never noticed the problem again. The moment I put wifi back on, the same problem starts again. the screen stays black when I want to get it out of sleep, and after a while it gets back to life.
    The part that makes me angry is that I have this problem for a long time. and always everyone said to me it was because of the 'coma mode' so I supposed it to be a software problem and the update would fix it. Now last month my warranty and support expired, and I have updated my phone to the new 3.1.2 (which I tought would solve the problem) but now it seems not to be a software problem, and my phone is just not capable to run wifi and reacty normal at the same time! If I had known this earlyer I would have give it back to Apple, to get a new one, one that works while I still had warranty (last month). But since that coma mode problem I let my warranty expire and thought the new update would fix my problems.
    So this leaves me with a phone advertised to have wifi, but actually is not able to use wifi. (at least not if you want to make sure you can answer your calls whenever they come in)
    I know I won't get any feedback from Apple (I have to pay to get feedback of course) but I just wanted to say this.
    Maybe this could help people with the same problem.

  • IPhone will not slide to unlock.

    All of the buttons and the slide to turn off works, but I cannot slide to unlock. I have restored, restarted, and upgraded all software. Any ideas? It is frustrating when the phone rings and I cannot answer it.

    As lots of users I am having the problem that my iPhone takes many seconds to unlock once I "slide to unlock" it could sometimes take 5 to 10 seconds before my telephone reacts.
    This is really anoying, because I can't even pick up a phonecall when this happens, I have to wait untill my phone stops ringing, and then I suddenly can unlock the phone and I have to call that person back (this cant be the meaning of a phone)
    I recently noticed that this must have to do with wifi. I disabled wifi for almost 2 weeks, and I never noticed the problem again. The moment I put wifi back on, the same problem starts again. the screen stays black when I want to get it out of sleep, and after a while it gets back to life.
    The part that makes me angry is that I have this problem for a long time. and always everyone said to me it was because of the 'coma mode' so I supposed it to be a software problem and the update would fix it. Now last month my warranty and support expired, and I have updated my phone to the new 3.1.2 (which I tought would solve the problem) but now it seems not to be a software problem, and my phone is just not capable to run wifi and reacty normal at the same time! If I had known this earlyer I would have give it back to Apple, to get a new one, one that works while I still had warranty (last month). But since that coma mode problem I let my warranty expire and thought the new update would fix my problems.
    So this leaves me with a phone advertised to have wifi, but actually is not able to use wifi. (at least not if you want to make sure you can answer your calls whenever they come in)
    I know I won't get any feedback from Apple (I have to pay to get feedback of course) but I just wanted to say this.
    Maybe this could help people with the same problem.

  • HT4061 The slider on the opening screen wont 'slide to unlock'?

    I have new iphone and trying to clear old phone to pass on but I seem to have got so far and now the slider on opening screen 'slide to unlock' is stuck. I have tried holding on/off key and screen button down. Can anyone help?

    Try holding down the on/ff and the home buttons at the same time until you see the Apple logo, it can take up to 30 sec. 

  • My ipod wont slide to unlock

    my ipod will not slide to unlock I have tried resetting it, and nothing it still does not work! does any body know how to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Wont slide to unlock

    my iphone 3g will not slide to unlock, i can slide to power off? its updated to latest software but still the same, i cant answer calls or any functions at all other than slide to power off, any ideas? thanks in advance.

    Just had this happen today, was working last night, this morning the touch screen is not responding at all. Tried to do an apple logo reset and it just started clicking like a camera taking a picture. Done a full factory restore and still no touch screen functionality. Going crazy without my ipod, somebody please help me !!

Maybe you are looking for

  • Why does my ipad keep needing to be reconnected to itunes?

    For the second time in less than a month, my iPad 2 shows the screen that requires reconnected to iTunes.  Everything was working fine yesterday, but when I went use the iPad this morning, a reconnect was needed.  Help.  If I don't have a computer wi

  • My macbook pro 2007 won't print to any printer

    It will scan my Epson Stylus CX9400fax but will not print.  Just sits there saying it is sending data.  Have downloaded recent drivers.  Verified disk.  Repaired permissions.  Having the same issue with an Epson Stylus CX5000.  Nothing will print.  B

  • Color on tabs or in table background to distinguish connections

    Hi I would like to have a feature where I can choose color on tabs or on the background on tables for different connections. I connect to databases with similiar tables but for different environment, ie Test or Production. And if I have many tables p

  • Why my user application becomes empty after I installed Lion??

    I can see another application file is full of apps but only my user application is empty, I cannot see anything.... I already re-installed a few times and it's same. Thank you for answering question in advance.

  • CD-R Lightscribe problem

    A funny thing happened the other day. I made a music cd on a lightscribe HP CD-R disc. I use a LaCie writer. I put the disc upside down to write the names of the songs and got a message that this disc does not work on this computer. Now, I have been