Hi my itouch was dropped in water and now the speakers dont always play. in a video or on the music app where it would have the volume indicator there is just nothing.

And when i plug it in to charge it cuts in and out of connection to my computer

- If you did not fully dry the iPod try here:
How to fix a wet iPod or iPhone | eHow.com
- WHen I pod is dry try the following:
- Reset:
Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If it still does not work you have a hardware problem caused by the water and service s necessary.

Similar Messages

  • My iphone was dropped into water and now is frozen on the initialization screen. I would like to retrieve the photos from it before I send it back to the insurance company. Any advice?

    I have already tried to upload the photos through a computer that does not have iTunes installed because I am afraid that it will erase everything that is already on the phone. However, it states that the DCIM folder is empty yet the device only has 12 GB of memory free on a 40 GB so obviously there is data on the phone. My Verizon rep recommends just plugging it into iTunes. I have one computer that has not updated to iOS5. Any thought? Thanks in advance.

    You could use a third party app on your computer, that uses the iPhone as just an external disk.
    There are several like iExplorer, Diskaid, Phonedisk, etc.

  • My ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put the passcode in my ipod, and i can't do anything with my ipod until it connects. what should i do?

    my ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put in the passcode, and i can't do anything to my ipod until it connects to itunes. so, basically i can't do anything from the ipod or to it from the computor. what should i do?

    Restore...
    From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
    There's more to try but let's go a bit at a time.

  • Dropped my ipad and now the screen is fuzzy can I fix?

    dropped my ipad and now the screen is fuzzy, can it be fixed?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My iphone fell in to the water and now the wifi is not working

    My iphone fell in to the water and now the wifi is not working .......please help

    Water damage is normally catastrophic to electronic devices.  Turn off the iPhone, place the device in a bag of uncooked white rice, and leave it in there for 5-7 days.

  • Was installing osx mavericks and now the iMac is restarting itself over and over

    Was installing osx mavericks and now the iMac is restarting itself over and over

    Shut the power clear off, wait a minute or 2 and restart and see if that clears the problem.
    Don

  • Ive damaged the aux in port and now the volume is locked. how can i enable my internal speakers?

    ive damaged the aux in port and now the volume is locked. how can i enable my internal speakers?

    rizmasterp,
    Thsi not a lot of nfo to go on, nor have you included the OSX, model of you MBP. PLease post that so that anyone reading this might be able to offer some help, as well as some more info on "I've damaged my aux port.
    That being said, all I can suggest is to go to system preferences>sound>output tab and see if you can select internal speakers.
    With the info available all I would otherwise suggest is a pram reset:
    Power off the MBP, Power back up holding option, command, P R (no commas) hold these immediatly afterpower up, contine to hold them till you hear the start chime 2 times then release. See if your speakers work.
    Post the afore mentioned info and someone here might be able to offer some more help. If in fact you have physically damaged the port that might require repair from Apple r an authorized Apple service provider. (AASP)
    Best

  • My 2 year old tapped some keys on my Macbook and now the volume keys at top don't work. If I press F12, the dashboard pops up. How do I get it to work as it used to?

    My 2-year-old randomly tapped some keys on my Macbook and now the volume keys at top don't work. For example, if I press F12, the dashboard pops up, whereas previously it used to increase the volume. HELP! I'm a techno nitwit -  how do I get it to work as it used to?

    I did this myself recently while playing around with the settings - go to System Preferences and in there somewhere will be a setting saying - " use all function keys as standard function keys" or something like that. You need to deslect or say "no" and then it will work as it used to!

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • Dropped my phone in water and now the camera doesn't work, any ideas why its' the only thing not working

    I somehow knocked my iphone 4s in the sink of water and everything seems to work except the camera.  Is there a way to reinstall  the software or does anyone know what I can do other than using phone protection insurance?  All my pictures are there and they upload and share but just can't get the camera to take pictures.

    The device is damage, it was dropped in water.  You are lucky that the device works at all.

  • I dropped my Ipod and now the click wheel is not working anymore

    Hey! I hope you can help me! I dropped my Ipod today, and now the Click wheel doesn't work anymore! The IPod broke open, but I put it together again! When I came home I connected it with the computer to see if "its" alive. And it connected and updated and everything was okay, instead of the Click wheel control! When it dropped there was "Hold" and now I can't deactivate "Hold". So I think, maybe the click wheel doesn't work because "Hold" was activated the moment the ipod dropped! BUt I don't know! Maybe something inside the ipod a soldering joint got torn apart, or something, I don't know! I just know the click wheel doesn't work, anything else seems to be okay! Can anyone help me???

    hey and whops about dropping your ipod...
    heres what i think but im not an ipod know it all so what i say might not help but any way...
    And it connected and updated and everything was okay, instead of the Click wheel control!
    well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
    I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
    Hope it fixes

  • HT1320 Dropped my ipod and now the screen is flipped upsidedown. How do I get it back?

    I dropped my ipod nano and now the screen is flipped upside down, how do I get it back?

    Reset your iPod

  • I dropped my phone and now the screen is going funny.

    i dropped my iphone on the ground and now the screen is going funny. by that i mean it doesn't always click on the things i want and it doesn't let me unlock my phone, what should i do?

    Get it fixed. Take it to an Apple Store for them to look at.
    Dropping electronics on hard surfaces does have a habit of making them go "funny" - best to avoid doing that if you can.

  • I dropped my IPhone 6 plus in water and now the power button does not want to work

    So i had the Iphone 6 Plus in my hand when it feel into a big puddle and it was in there for more than a minute so i come home and i find out that the power button (on the right hand side button) doesn't want to work like its on and im on the home page and then i press the button and nope nothing and the volume button somewhat works and sometimes the power button works so i turn it off and i put it in the rice next thing you know the phone turns on again without me touching it or anything. So I need help and the phone is new not even a month i have had it and i don't want to spend money on it. Please help! This phone is my life and i will do anything(that does not wast money) to save my phone.

    You can try leaving it in that bag of rice for 5-7 days to see if it will dry, however if it will not stay turned off, I would say that something is shorted out. You will need to make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and be ready to pay for an out of warranty replacement. If you purchased Apple Care Plus there is only a deductible, but without it, you will have to pay the price of an out of warranty phone. User damage is not covered under warranty.

  • I dropped my iPhone 6 plus and now the volume down button is lodged in. How do I fix this?

    I haven't had for my iPhone 6 plus for long - almost a month. But I just noticed that the volume down button is lodged in and it is stuck which must have been from me dropping it. But it doesn't affect the volume whatsoever as I can still lower or increase the volume, I was wondering what can I do to fix this or if I bring it to apple will they fix it for me for free?

    Since you have dropped the phone I don't think that they will do the repair for free, sorry.
    But you should not try to repair this on your own, make an appointment at the Genius Bar at an Apple Store and see what they decide.

Maybe you are looking for

  • Converting Grayscale To RGB

    I am trying to add some B&W photos that I scanned. In a previous post I was advised to convert any grayscale pix to RGB. Is there a way to convert using os x 10.3.9? I think I figured it out in photoshop. When I open the pic in preview and select "ge

  • FI_GL_4 - No records in delta

    I am using datasources FI_GL_4 and FI_AP_4 for delta loads from 3 R3 instances. I set my process chain to run at 15 minutes after midnight and got no records. I changed to time to 1:00am and again got no records. Is there a 'waiting period' after whi

  • Mail Configuration in X6

    I have a X6 . When I try to configure rediffmail in the mobile I get the following message : "Our e mail service  has been unable to connect to your e mail service provider preventing email delivery to your phone" I have not changed my username or pa

  • Output type requirement

    Hi,    We are trying to tag a requirement to all the PO output types to stop them from triggering when the PO is put on hold. I see the transaction NACE and find requirements already tagged to few of the output types. If I have to add our requirement

  • Channel Determination Failure

    I have a RFC -> XI -> SOAP scenario. When I attempt to send a test message in RWB, I get a Channel Determination Failure message for the receiver (SOAP comm. channel). Looks like the Receiver channel has been started but is not used. Both the sender