Hi! My macbook pro wont switch on at all, pressing the power doesnt do anything, when plugged it switch on to get the white background with the apple sign and a loading button that kept on forever. anyone has a clue?
Hello as mentionned before I cannot get my macbook pro to switch on.
when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing.
I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed
My macbook is 1 year and 4months
See Gray Screen, try holding the Shift key upon boot
Cheat sheet to help diagnose and fix your Mac
Drive may not boot, but if it's still working then data can be recovered
Data recovery efforts explained
Most commonly used backup methods explained
Similar Messages
-
Help, Turned on MacBook Pro this morning and just get a white screen with grey apple logo and spinning gear. Cannot access desktop.
Computer starts up in Safe boot by holding down the shift button. But when I go to restart the same thing happens. What should I do?
-
My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hi, I am not able to reboot my Mac desktop.
When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle.
The system refuses to boot.
What can I do?
MarcusWe need to get you moved. This forum is for mini-tower Macs built between 1998 and 2005 and doesn;t get as much traffic ("eyeballs on the problem") as the forums for newer Macs.
Please do "About this Mac" from you Apple menu and tell us what that says for "processor" and Mac OS version. Looks like this:
or this for later Mac OS versions:
With that we can figure out which of the two iMac forums you need and get the Hosts to move your post. -
My iPad wont turn on. There is just the apple sign and a loading bar. On a black screen.
My friends Pad wont turn on. There is just the apple sign and a loading bar. On a black screen. She has iPad first generation. This happened straight after connection to iTunes for the latest update.
She will need to restore again using Recovery Mode.
iPad: Unable to update or restore - Support - Apple -
I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it? I have had it for more than one year without any problem
To turn on/off retail mode, go to settings, general, legal.
Do not open legal, just put the cursor there.
Then, on the remote, type this sequence : right - right - left - center.
The AppleTV should reboot. -
one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?
Welcome to the Apple Community.
The first thing you should do is have your friend log out of your account and change your password.
Do you have a back up from when you had the contacts on your phone. -
my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi,
My ICloud was hacked. So I updated my password and now have my Iphone and the Icloud online email working. Yet the email set up on my Macbook Pro still will not work and I ran through the troubleshooting. It has ICloud IMAP. Can someone please help me with this?
Thank you.First, a caution: Do not retry passwords. Trying random passwords or wrong passwords more than (usually) twice, and that'll usually trip evasion, and you'll get blocked even with the right passwords. If you've retried random passwords, you'll have to let things "cool off" for a while, and try again later.
Open up the details drawer in the Mail.app Connection Doctor troubleshooting, and re-run the connection tests. Expurgate anything sensitive from the diagnostics, and post the iCloud-related errors here.
Alternatively, remove the iCloud account from the accounts listed within Mail.app. Re-add it. See if that clears the issue.
Alternatively and if the other options here fail, contact Apple iCloud support directly and request assistance. -
Can anyone help, please??
Hey, I'm probably too late and you may have already solved it but here's a solution. In iTunes go to Edit then preferences and then click on reset dialog warnings. What happens is when you first sync your ipod, you receive a message saying something like transfer?and you've probably selected "Do not show this message again". I don't really know why but iTunes assumes that the apps on your iPod are already on your computer and therefore need no transferring.
After you've reset it, the same message should pop up about transferring. As long as you don't click don't show, you should be good to go. -
Apple macbook pro wont start up
On operating start button, laptop beeps but goes no further.
A beeping sound is the Power On Self Test telling you there is a hardware problem of some sort with the machine.
If you have recently installed RAM into the machine, it's either not seated correctly, the wrong spec, or defective and you need to replace the factory RAM and/or try again.
All other issues, make a appointment for service with Apple. -
There is a screen with an apple sign that has been frozen all night long. What do I do?
There is a screen with an apple sign on my ipod touch that has been frozen all night long. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanksReset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together. -
I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
<Edited by Host>Cami87,
which model MacBook Pro do you have, and which version of OS X is installed on it?
Maybe you are looking for
-
Problem with iTunes family sharing payment & app licenses
Hiya, We're using iTunes family sharing with my wife since iOS8, on our iPhones (4S & 5, both with latest iOS). My account is the "Organizer" and my wife has Parental access (so she can use the same payment method, my credit card). There are a couple
-
Hello to All When i punch A/P dowmpayment request & after that make outgoing payment against that request error occur that GL a/c is missing
-
Built in SQL Function for Sum of Geometric Progression
Hi all, Please let me know if there is any availble built in SQL function for SUm of Geometric Progression. Thanks in Advance, Kaushik B.
-
Get Items from limited list by providing username and password - C#
I'm using the code at the following link in order to get items from SharePoint list, http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.list.getitems.aspx I have a SharePoint list that limited to certain users. How can I provide by t
-
Role assignment to user in child system
Hi, We have a CUA with role assignment in SCUM defined as global. There is any way of assigning roles to users in child system when CUA system is not available? There is any way to allow roles assignement in both Parent and child systems? Many than